Adding the runner key

.gitea/workflows/build-nixos.yml

@@ -0,0 +1,33 @@
+name: Build NixOS config
+on:
+  pull_request:
+    branches: [ master ]
+    paths:
+      - '**.nix'
+      - 'flake.lock'
+      - 'secrets/**'
+      - 'hosts/**'
+      - 'modules/**'
+  push:
+    branches: [ master ]
+    paths:
+      - '**.nix'
+      - 'flake.lock'
+      - 'secrets/**'
+      - 'hosts/**'
+      - 'modules/**'
+
+jobs:
+  build:
+    runs-on: nixos-builder
+    steps:
+      - name: Checkout
+        run: |
+          git clone -b "${{ github.head_ref || github.ref_name }}" \
+            https://gitea:${{ secrets.GITHUB_TOKEN }}@code.lazyworkhorse.net/gortium/infra.git .
+          git log --oneline -3
+
+      - name: Build NixOS config (lazyworkhorse)
+        run: |
+          nix --version
+          nh os build .#lazyworkhorse 2>&1

flake.nix

@@ -2,34 +2,20 @@
   description = "Gortium infra flake";
 
   inputs = {
-    nixpkgs.url = "github:nixos/nixpkgs?ref=25.11";
+    nixpkgs.url = "github:nixos/nixpkgs?ref=nixos-unstable";
     agenix = {
       url = "github:ryantm/agenix";
       inputs.darwin.follows = "";
       inputs.nixpkgs.follows = "nixpkgs";
     };
-    disko = {
-      url = "github:nix-community/disko";
-      inputs.nixpkgs.follows = "nixpkgs";
-    };
     lix = {
       url = "git+https://git.lix.systems/lix-project/lix?ref=main";
       inputs.nixpkgs.follows = "nixpkgs";
     };
-    nixpkgs-uconsole = {
-      url = "github:nixos/nixpkgs/54170c54449ea4d6725efd30d719c5e505f1c10e";
-    };
-    nixos-uconsole = {
-      url = "github:nixos-uconsole/nixos-uconsole/v1.1.0";
-      inputs.nixpkgs.follows = "nixpkgs-uconsole";
-    };
-    nixos-raspberrypi = {
-      url = "github:nvmd/nixos-raspberrypi/v1.20260317.0";
-      inputs.nixpkgs.follows = "nixos-uconsole/nixpkgs";
-    };
+    self.submodules = true;
   };
 
-  outputs = { self, nixpkgs, agenix, disko, lix, nixos-uconsole, nixos-raspberrypi, ... }@inputs:
+  outputs = { self, nixpkgs, agenix, lix, ... }@inputs:
     let
       system = "x86_64-linux";
       keys = import ./lib/keys.nix;
@@ -40,7 +26,7 @@
           "/etc/ssh/ssh_host_ed25519_key"
           "/root/.age/bootstrap.key" ];
       };
-      overlays = [ agenix.overlays.default (import ./overlays/reticulum.nix) ];
+      overlays = [ agenix.overlays.default ];
       pkgs = import nixpkgs {
         inherit system overlays;
         config.allowUnfree = true;
@@ -94,24 +80,6 @@
               ./hosts/cyt-pi/hardware-configuration.nix
             ];
           };
-
-          uConsole = nixos-uconsole.lib.mkUConsoleSystem {
-            variant = "cm5";
-            specialArgs = { inherit self keys paths inputs nixos-raspberrypi; };
-            modules = [
-              {
-                nixpkgs.overlays = overlays;
-                nixpkgs.config.allowUnfree = true;
-                nixpkgs.config.permittedInsecurePackages = [
-                  "openclaw-2026.3.12"
-                ];
-              }
-              disko.nixosModules.disko
-              ./hosts/uConsole/configuration.nix
-              ./hosts/uConsole/hardware-configuration.nix
-              ./hosts/uConsole/disko-config.nix
-            ];
-          };
         };
         devShells.${system}.default = devShell;
       };

hosts/lazyworkhorse/configuration.nix

@@ -11,10 +11,6 @@
   # Flakesss
   nix.settings.experimental-features = [ "nix-command" "flakes" "flake-self-attrs" ];
   nix.settings.trusted-users = [ "root" "gortium" ];
-  nix.settings.extra-platforms = [ "aarch64-linux" ];
-
-  # QEMU binfmt for cross-building aarch64 NixOS targets
-  boot.binfmt.emulatedSystems = [ "aarch64-linux" ];
 
   # Garbage collection
   nix.gc = {
@@ -211,7 +207,6 @@
     ai = {
       path = self + "/assets/compose/ai";
       envFile = config.age.secrets.containers_env.path;
-      ports = [ 22000 ];  # Syncthing TCP sync
     };
 
     cloudstorage = {
@@ -479,7 +474,7 @@
   services.openssh.settings = {
     PermitRootLogin = "no";
     MaxAuthTries = 3;
-    MaxSessions = 20;
+    MaxSessions = 10;
     LoginGraceTime = 30;
     ClientAliveInterval = 300;
     ClientAliveCountMax = 2;

hosts/uConsole/configuration.nix

@@ -1,286 +0,0 @@
-{ config, lib, pkgs, paths, self, keys, ... }:
-
-let
-  # Backlight fallback for CM5 display quirk
-  # The kernel driver usually handles this, but some boots need a kick
-  backlightFixScript = pkgs.writeShellScript "backlight-fix" ''
-    # Try sysfs backlight control
-    for bl in /sys/class/backlight/*/brightness; do
-      if [ -f "$bl" ]; then
-        max=$(cat "$(dirname "$bl")/max_brightness" 2>/dev/null || echo 100)
-        echo "$max" > "$bl" 2>/dev/null || true
-      fi
-    done
-  '';
-in
-
-{
-  # Basic Host Info
-  networking.hostName = "uConsole";
-  time.timeZone = "America/Montreal";
-  i18n.defaultLocale = "en_CA.UTF-8";
-
-  # System State
-  system.stateVersion = "25.11";
-
-  # Boot & Hardware (migrated to kernel bootloader per nixos-raspberrypi deprecation notice)
-  boot.loader.raspberry-pi.bootloader = "kernel";
-  # kernel managed by nixos-raspberrypi module — don't override, patches are version-specific
-  # boot.kernelPackages = pkgs.linuxPackages_latest;
-
-  # Kernel parameters matching nixos-uconsole CM5 module
-  # console=tty1 is critical — without it, console output goes to ttyAMA0 not fb0
-  boot.kernelParams = [
-    "8250.nr_uarts=1"
-    "console=tty1"
-  ];
-
-  # Enable Mesa GPU drivers — REQUIRED for VC4 display pipeline to initialize
-  hardware.graphics.enable = true;
-
-  # Console font sized for the 5" 720x1280 display (from nixos-uconsole base module)
-  console = {
-    earlySetup = true;
-    font = "ter-v24n";
-    packages = with pkgs; [ terminus_font ];
-  };
-
-  # Networking
-  networking.networkmanager.enable = true;
-  services.openssh = {
-    enable = true;
-    # TODO: lock down after first deployment
-    settings.PermitRootLogin = lib.mkForce "yes";
-    settings.PasswordAuthentication = lib.mkForce true;
-  };
-
-  # User
-  users.users.gortium = {
-    isNormalUser = true;
-    extraGroups = [ "wheel" "networkmanager" "video" "dialout" "kismet" ];
-    openssh.authorizedKeys.keys = [
-      keys.users.gortium.main
-      keys.users.gortium.gitea
-    ];
-  };
-  security.sudo.extraRules = [
-    {
-      users = [ "gortium" ];
-      commands = [
-        {
-          command = "ALL";
-          options = [ "NOPASSWD" ];
-        }
-      ];
-    }
-  ];
-
-  # ============================================================
-  # Package groups
-  # ============================================================
-
-  environment.systemPackages = with pkgs; [
-    # ===== Base =====
-    emacs-pgtk
-    git
-    ripgrep
-    fd
-    htop
-    tmux
-    neovim
-    libgpiod                    # GPIO control (for internal USB hub, AIO modules)
-
-    # ===== HAM Radio =====
-    js8call
-    wsjtx
-    fldigi
-    pat                        # Winlink client
-    direwolf                   # AX.25 packet modem
-    chirp                      # Radio programming tool
-    hamlib                     # Ham radio control libraries
-    trustedqsl                 # Logbook of the World (LoTW)
-
-    # ===== SDR / RF =====
-    sdrpp                      # SDR++ spectrum analyzer
-    gqrx                       # SDR receiver GUI
-    rtl-sdr                    # RTL-SDR drivers & utilities
-    inspectrum                # Offline signal analysis
-    soapysdr-with-plugins      # SoapySDR + hardware support plugins
-
-    # ===== Mesh / LoRa =====
-    # meshtastic not available in nixpkgs 25.11 stable; install manually:
-    # nix shell nixpkgs#meshtastic -c meshtastic
-    reticulumStack             # Reticulum Network Stack (rnsd, rnsh, rncp, rnx, rnpath, etc.)
-    lxmf                       # LXMF messaging protocol
-    nomadnet                   # Nomad Network client
-
-    # ===== Security =====
-    nmap
-    aircrack-ng
-    kismet                     # Wi-Fi monitor / IDS
-    bettercap                  # MITM/network attack framework
-    wireshark                  # Packet analyzer
-    hashcat                    # GPU password cracker
-    john                       # John the Ripper
-    sqlmap                     # SQL injection tool
-
-    # ===== GPS / Maps =====
-    foxtrotgps
-    viking                     # GPS map editor
-    gpsbabel                   # GPS data conversion
-  ];
-
-  # Packages noted but not in unstable nixpkgs:
-  #   - metasploit: unfree; install manually via Git clone
-  #   - burpsuite: unfree Java app (Community Edition available for download)
-  #   - sidechannel: not a distinct PyPI package; functionality covered by
-  #     the Reticulum stack. For LXMF GUI client, install Sideband manually
-  #     from github.com/markqvist/Sideband
-
-  # ============================================================
-  # Reticulum Service (rnsd)
-  # ============================================================
-  systemd.services.rnsd = {
-    description = "Reticulum Network Stack Daemon";
-    wants = [ "network-online.target" ];
-    after = [ "network-online.target" ];
-    wantedBy = [ "multi-user.target" ];
-    serviceConfig = {
-      User = "gortium";
-      Group = "gortium";
-      ExecStart = "${pkgs.reticulumStack}/bin/rnsd";
-      Restart = "always";
-      RestartSec = "10s";
-      LimitNOFILE = 65536;
-    };
-  };
-
-  # ============================================================
-  # Kismet Service (Wi-Fi monitoring / mesh node)
-  # ============================================================
-  systemd.services.kismet = {
-    description = "Kismet Wi-Fi Monitor & IDS";
-    wants = [ "network-online.target" ];
-    after = [ "network-online.target" ];
-    wantedBy = [ "multi-user.target" ];
-    serviceConfig = {
-      User = "gortium";
-      Group = "kismet";
-      ExecStart = "${pkgs.kismet}/bin/kismet -c wlan0 --log-base=/home/gortium/kismet_logs --no-nc-ui";
-      Restart = "always";
-      RestartSec = "10s";
-    };
-  };
-
-  # ============================================================
-  # Kernel modules for SDR, radio, and WiFi
-  # ============================================================
-  boot.kernelModules = [
-    "mt7921u"         # MediaTek MT7921 USB WiFi (uConsole AC1200)
-    "88x2bu"          # Realtek 8812/8821BU USB WiFi (common adapter)
-    "rtl8xxxu"        # RTL8188/8192/8723 USB WiFi
-    "rtl2832_sdr"     # RTL-SDR kernel module
-    "dvb_usb_rtl28xxu" # RTL-SDR DVB-T
-    # Display drivers — loaded AFTER RP1 PCIe southbridge init (~12s)
-    # NOTHING in initrd — ALL RP1 hardware is behind PCIe
-    "panel_cwu50"     # uConsole DSI panel driver
-    "vc4"             # VideoCore 4 KMS GPU driver
-    "rp1_dsi"         # RP1 DSI bridge driver
-  ];
-
-  boot.blacklistedKernelModules = [ ];
-
-  # Rien dans initrd pour le display — tout RP1 est derrière PCIe
-  boot.initrd.kernelModules = lib.mkForce [ ];
-
-  # ============================================================
-  # Extra udev rules for SDR and HAM radio devices
-  # ============================================================
-  services.udev.packages = with pkgs; [ rtl-sdr ];
-
-
-
-  # ============================================================
-  # Enable IPv6 for Reticulum mesh
-  # ============================================================
-  networking.enableIPv6 = true;
-
-  # ============================================================
-  # Firewall: open ports for Reticulum (optional)
-  # ============================================================
-  networking.firewall.allowedTCPPorts = [ 22 ]; # SSH only
-  networking.firewall.allowedUDPPorts = [ ];
-  # Reticulum uses its own encryption and doesn't need open ports
-  # for basic mesh operations (peer-to-peer discovery).
-  # For TCP interfaces, open additional ports as needed.
-
-  # ============================================================
-  # Hyprland Wayland compositor (manual start)
-  # No SDDM — boot to console, user starts Hyprland with command
-  # Display modules (vc4/panel_cwu50) load late after RP1 PCIe init
-  # ============================================================
-  programs.hyprland = {
-    enable = true;
-    xwayland.enable = true;
-  };
-  # SDDM disabled — was blocking boot when display isn't ready
-  # services.displayManager.sddm = {
-  #   enable = true;
-  #   wayland.enable = true;
-  # };
-
-  # ============================================================
-  # CM5 Config.txt Fix: use [pi5] section (not [cm5])
-  # Rex's images use [pi5], the CM5 firmware may not detect [cm5]
-  # ============================================================
-  # Merge nixos-uconsole GPIO config with our [pi5] overrides
-  # GPIO 10/11 are from nixos-uconsole configtxt.nix (audio amplifier)
-  # [pi5] section fixes the CM5 detection issue — firmware matches [pi5] not [cm5]
-  hardware.raspberry-pi.extra-config = ''
-    [all]
-    gpio=10=ip,np
-    gpio=11=op,dh
-
-    [pi5]
-    dtparam=pciex1=off
-    dtoverlay=clockworkpi-uconsole-cm5
-    dtoverlay=dwc2,dr_mode=host
-    dtoverlay=vc4-kms-v3d-pi5,cma-384
-    dtparam=nohdmi1=off
-  '';
-
-  # ============================================================
-  # CM5 Display Backlight Fix
-  # The kernel driver initializes backlight, but some boots fail.
-  # This service kicks it after boot as a reliable fallback.
-  # ============================================================
-  systemd.services.cm5-backlight-fix = {
-    description = "CM5 Display Backlight Fix";
-    after = [ "multi-user.target" ];
-    wantedBy = [ "multi-user.target" ];
-    serviceConfig = {
-      Type = "oneshot";
-      ExecStart = "${backlightFixScript}";
-    };
-  };
-
-  # ============================================================
-  # Internal USB Hub Enable (GPIO 23) — DISABLED
-  # This service freeze the CM5 because gpioset 0 23=1 writes
-  # to the wrong GPIO chip (BCM2712 native, not RP1).
-  # Enable manually after boot once the correct chip is confirmed:
-  #   gpioset 0 23=1   # on chip 0 (BCM2712, CORE_VOLT or critical)
-  #   gpioset 512 23=1 # on chip 512 (RP1, likely correct)
-  # ============================================================
-  # systemd.services.enable-gpio23-usb-hub = {
-  #   description = "Enable Internal USB Hub (GPIO 23)";
-  #   before = [ "network.target" ];
-  #   wantedBy = [ "multi-user.target" ];
-  #   serviceConfig = {
-  #     Type = "oneshot";
-  #     RemainAfterExit = true;
-  #     ExecStart = "${pkgs.libgpiod}/bin/gpioset 0 23=1";
-  #     ExecStop = "${pkgs.libgpiod}/bin/gpioset 0 23=0";
-  #   };
-  # };
-}

hosts/uConsole/disko-config.nix

@@ -1,46 +0,0 @@
-{ lib, ... }:
-{
-  disko.devices.disk.main = {
-    type = "disk";
-    device = "/dev/mmcblk0";
-    content = {
-      type = "gpt";
-      partitions = {
-        boot = {
-          name = "FIRMWARE";
-          size = "1G";
-          type = "EF00";
-          content = {
-            type = "filesystem";
-            format = "vfat";
-            mountpoint = "/boot/firmware";
-            mountOptions = [
-              "fmask=0022"
-              "dmask=0022"
-            ];
-          };
-        };
-        root = {
-          name = "NIXOS_UCM5";
-          size = "30G";
-          content = {
-            type = "filesystem";
-            format = "ext4";
-            mountpoint = "/";
-            mountOptions = [ "noatime" ];
-          };
-        };
-        home = {
-          name = "NIXOS_HOME";
-          size = "100%";
-          content = {
-            type = "filesystem";
-            format = "ext4";
-            mountpoint = "/home";
-            mountOptions = [ "noatime" ];
-          };
-        };
-      };
-    };
-  };
-}

hosts/uConsole/hardware-configuration.nix

@@ -1,39 +0,0 @@
-{ config, lib, pkgs, modulesPath, ... }:
-
-{
-  imports =
-    [ (modulesPath + "/installer/scan/not-detected.nix")
-    ];
-
-  boot.initrd.availableKernelModules = [ "xhci_pci" "usbhid" "usb_storage" "sdhci_pci" "nvme" ];
-  boot.initrd.kernelModules = [ ];
-  boot.extraModulePackages = [ ];
-
-  # Filesystems for NixOS install.
-  # mkForce overrides disko's auto-generated paths so we can use
-  # filesystem labels (by-label) which work with loop device installs.
-  # Disko will set its own paths when nixos-anywhere is used.
-  fileSystems."/" = lib.mkForce {
-    device = "/dev/disk/by-label/NIXOS_UCM5";
-    fsType = "ext4";
-    options = [ "noatime" ];
-  };
-
-  fileSystems."/boot/firmware" = lib.mkForce {
-    device = "/dev/disk/by-label/FIRMWARE";
-    fsType = "vfat";
-    options = [ "fmask=0022" "dmask=0022" ];
-  };
-
-  fileSystems."/home" = lib.mkForce {
-    device = "/dev/disk/by-label/NIXOS_HOME";
-    fsType = "ext4";
-    options = [ "noatime" ];
-  };
-
-  swapDevices = [ ];
-
-  nixpkgs.hostPlatform = lib.mkDefault "aarch64-linux";
-  hardware.enableRedistributableFirmware = true;
-  powerManagement.cpuFreqGovernor = lib.mkDefault "ondemand";
-}

overlays/reticulum.nix

@@ -1,92 +0,0 @@
-final: prev: let
-  python3 = final.python3;
-  pyPkgs = python3.pkgs;
-in
-  {
-    reticulumStack = python3.pkgs.buildPythonApplication rec {
-      pname = "reticulum";
-      version = "1.2.9";
-      format = "setuptools";
-      src = pyPkgs.fetchPypi {
-        pname = "rns";
-        inherit version;
-        sha256 = "554814231c237b9caacf8df669312e57dd7d3f84b6d4810125087d1a79a75d75";
-      };
-      patchPhase = ''
-        # Fix license_files syntax: ("LICENSE") is a string not tuple
-        # Newer setuptools iterates over it char by char, fails on 'S'
-        substituteInPlace setup.py \
-          --replace-fail 'license_files = ("LICENSE")' 'license_files = ("LICENSE",)'
-      '';
-      propagatedBuildInputs = with pyPkgs; [ cryptography pyserial ];
-      doCheck = false;
-      pythonImportsCheck = [ "RNS" ];
-      meta = with final.lib; {
-        description = "Self-configuring, encrypted and resilient mesh networking stack";
-        homepage = "https://reticulum.network/";
-        license = licenses.mit;
-        platforms = platforms.linux;
-      };
-    };
-
-    lxmf = python3.pkgs.buildPythonApplication rec {
-      pname = "lxmf";
-      version = "0.9.8";
-      format = "setuptools";
-      src = pyPkgs.fetchPypi {
-        inherit pname version;
-        sha256 = "30f39f3a975a049c12ee2cfceb3261d24cb5adec881c6821f7354464b3f3650c";
-      };
-      propagatedBuildInputs = [ final.reticulumStack ];
-      doCheck = false;
-      pythonImportsCheck = [ "LXMF" ];
-      meta = with final.lib; {
-        description = "Lightweight Extensible Message Format for Reticulum";
-        homepage = "https://github.com/markqvist/lxmf";
-        license = licenses.mit;
-        platforms = platforms.linux;
-      };
-    };
-
-    nomadnet = python3.pkgs.buildPythonApplication rec {
-      pname = "nomadnet";
-      version = "1.1.1";
-      format = "setuptools";
-      src = pyPkgs.fetchPypi {
-        inherit pname version;
-        sha256 = "fa13b64a10e75b705a58024815ab72451700aa726af96d415ba99dec28dfc40a";
-      };
-      propagatedBuildInputs = with pyPkgs; [ final.reticulumStack final.lxmf urwid qrcode ];
-      doCheck = false;
-      pythonImportsCheck = [ "nomadnet" ];
-      meta = with final.lib; {
-        description = "Nomad Network — resilient mesh communications platform";
-        homepage = "https://github.com/markqvist/NomadNet";
-        license = licenses.mit;
-        platforms = platforms.linux;
-      };
-    };
-
-    rnsh = python3.pkgs.buildPythonApplication rec {
-      pname = "rnsh";
-      version = "0.1.7";
-      format = "setuptools";
-      src = pyPkgs.fetchPypi {
-        inherit pname version;
-        sha256 = "9cb72f25abb1c6d300f8014b264184ff78f592fe88e36094938012990b797c93";
-      };
-      propagatedBuildInputs = [ final.reticulumStack ];
-      doCheck = false;
-      pythonImportsCheck = [ "rnsh" ];
-      meta = with final.lib; {
-        description = "Remote shell over Reticulum";
-        homepage = "https://github.com/acehoss/rnsh";
-        license = licenses.mit;
-        platforms = platforms.linux;
-      };
-    };
-  }
-  # meshtastic may not exist in all nixpkgs versions (e.g. not in 25.11)
-  // prev.lib.optionalAttrs (prev ? meshtastic) {
-    inherit (prev) meshtastic;
-  }

secrets/containers.env.age

@@ -1,36 +1,36 @@
 -----BEGIN AGE ENCRYPTED FILE-----
-YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IHNzaC1lZDI1NTE5IEdoTUQ4QSBWNEpt
-cGFNeVBBaDRqb3pLSEZGQW0wb3VmVnBoZCswUFkzbnBLUnJ0QTNrClRqVkk4RUVO
-d29KYjd5YUcwankvaTFmVHUxQVpDT2ZYWHRaY3JXTUtQMU0KLT4gKXBtQ3UsXi1n
-cmVhc2UgNnwxYCBXVyA/KCQmIHt9NAo3OTZVUHR2UXkvaEFwY0ZBdEJsaFpsbHJ0
-cklKcDVHcEdWMEdPSkpnN0FiRU43RW5hUWFMdjR3WFRRSFBLSGlmClM3cTNJWlNM
-TExkdHdXUHJISkNIaE1TTUxUc1NUWkV1a09HeFU3bVZwQXMKLS0tIGhOcXFTUElS
-azJJNnEreUhMWTJBaVZGSTJPRUFqQkVYS01KRENUVVpZSDgK8+8onFejroBo7MeO
-dW+so4lOsq4zJKn3f0cxmCFg1f0X8zt6h4Uc3A5Cvr1uU+6yw1FWmJ7xa3jJz3lO
-EEaKQJXYC+xIIKGcA7qILa0SFp4a/4OuYjcg27HrlPhg7u5wDhQrd0LdVEe1Xngp
-ZivX7P7HwIna3X8C+TL+K2v/AG2N/z86cdKfRvxyMKNbHhYw+CfHEnWgh8tJ++4h
-G9evNniuNqte6cQaRe7jODfPNW4FuY/Sb7barlJ/M9iAQdYAdyLAzU1LABeHeUfD
-wtHjxy9DUZ55Vg8bB8M2JJU9MkoRT4ewiVd9LeC1GWeVmKsm93wsmrov714i7U2j
-wHtDkjqEF2MmzuQc18sjNaAHiwz8j6o5xU2L/Q4+Q707yISWG7RGZYh389Cr1rnw
-siUq/Vunqw2wk13+J/4vu9nqt5mMktBaCtp+QiWIurjwB5LUAyChrSm+dg5lb0Mt
-UhSc0lq1+E3vxAXM2Hmk+vP86VD+6WJvAU82VFApF1s6zG2FU1/AcOVVf54nan/q
-f+rgSFfASHQCYSblUJHyEtwLNsWEmTGmOEn1buUKD/H0zatPQnc0rYpjlx2V0Sjd
-6yB5+wPrZ0AkN1pjcsPKOv8Kaog2DzqIjib+SaSTaRxWHQEb9uzvaReAcYI5HOpE
-gkC040HN33BItATbo4+hz70Im8Ni/VXD+g6yzM6Hj1hJL+PinTKeg5keQRFIZjMx
-grzievB2wVBBgLgN3qMdTFmpplaL7iL702JjXZUTTK9Izp+9wiCsV1fTa53FWDht
-ylFL5SWElqXjK+QBXxAe+Jk6VQov5HI21YDXL67S554ABeRok23wxrQ31TCI4xq9
-PQV7VtNRjyVud7S29m3OwpWOsgTZhn+JclHj2v4bNJzJkJnZRTmcvGPktzRI5+R4
-e5vxVhGnJDzI71txaHl8+xS1lu9VzCQUrxX6TXyTRV4KjIOz0g06JOBgmBRBvJca
-7MZbC65xpisl/gyLRbgkVga3t94dPV+dpZsn8eq6427IyRbKslJefatggR9//c6I
-5N5fl0fR3gJQMB+HRbipBH2YsdbdWJyb4Nn6STZxIfrqoG/xC6C1raF0xK7hUx6i
-4DUDSPohM8fOIswQPfE+FH3eygfzu/Ln5+ghsgHTEhgFvmgMvyxaAt6kHIzIUhMX
-M3dASr4VPDpIXuXsRWwYLEifhzxsuvwVxfwtsnCaR6XKijsYECWGDdYOWHdleeqx
-wDPhxEesfFVhKxhrKY9Ir8k9/FFBKQU/3GjW4+SMAg5Al1YEzxshP9vKuVcsei7W
-JDwAwotNXaCm6NBckiyZJE53ou6+gckPY7V9cOfnuH74Z9ywkFzB3HW3ZlonaGyM
-oGmLGcccavFtyhg5s/As4i6X8ARIpDiwe59Pn3GNXMctySqIrrr2ogUoXgrfFCie
-6GOTdeMW7GeOSdJUxCofghlspS/nq01Og77VI/beWYrIwLubSka6Zaltww9zgObk
-/FGEMgFkEpq7iyCvYSPA8F46pJKvnMP3S84AWCPmcTcHeg4lwGPvs6btexXBGdoz
-nkCyq7wdH5Nngm7jUbl88LtaLZPAQkuqXphBVTnrF9Ofbnb4iRZ2Op4xpx9rGyvx
-mO6UEhL6V1i2YZFNkNMg/W8aoMiUgBdqbkxaxblT9L0aNdlFU9+LbWYolURVEadd
-Qjv0Z1gMA+tsuBbVszwsMfneZ5+B9Q==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 -----END AGE ENCRYPTED FILE-----