temp: remove nh to skip Haskell cross-compile

- Remove local boot.kernelPatches (now in nixos-uconsole fork)
- Point to github:gortium/nixos-uconsole/cm5_fix instead of pr/dcs-panel-detection

.gitmodules

@@ -1,3 +1,7 @@
 [submodule "assets/compose"]
 	path = assets/compose
 	url = ssh://git@code.lazyworkhorse.net:2222/gortium/compose.git
+[submodule "assets/dotfiles"]
+	path = assets/dotfiles
+	url = ssh://git@code.lazyworkhorse.net:2222/gortium/dotfiles.git
+	branch = master

AGENTS.md

@@ -5,6 +5,7 @@ This document outlines the development conventions for this NixOS-based infrastr
 ## Build & Deployment
 
 - **Build/Deploy:** Use `nixos-rebuild switch --flake .#<hostname>` to build and deploy the configuration for a specific host.
+- **CRITICAL — Validate before pushing:** Always `nix build --no-link '.#nixosConfigurations.<hostname>.config.system.build.toplevel'` (or `nh os build`) and confirm it succeeds before pushing any changes. Never push untested NixOS configs.
 - **Development Shell:** Activate the development environment with `nix develop`.
 
 ## Linting & Formatting

flake.lock

@@ -23,6 +23,22 @@
         "type": "github"
       }
     },
+    "argononed": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1729566243,
+        "narHash": "sha256-DPNI0Dpk5aym3Baf5UbEe5GENDrSmmXVdriRSWE+rgk=",
+        "owner": "nvmd",
+        "repo": "argononed",
+        "rev": "16dbee54d49b66d5654d228d1061246b440ef7cf",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nvmd",
+        "repo": "argononed",
+        "type": "github"
+      }
+    },
     "flake-compat": {
       "flake": false,
       "locked": {
@@ -37,6 +53,21 @@
         "url": "https://git.lix.systems/lix-project/flake-compat/archive/main.tar.gz"
       }
     },
+    "flake-compat_2": {
+      "locked": {
+        "lastModified": 1767039857,
+        "narHash": "sha256-vNpUSpF5Nuw8xvDLj2KCwwksIbjua2LZCqhV1LNRDns=",
+        "owner": "edolstra",
+        "repo": "flake-compat",
+        "rev": "5edf11c44bc78a0d334f6334cdaf7d60d732daab",
+        "type": "github"
+      },
+      "original": {
+        "owner": "edolstra",
+        "repo": "flake-compat",
+        "type": "github"
+      }
+    },
     "home-manager": {
       "inputs": {
         "nixpkgs": [
@@ -58,6 +89,27 @@
         "type": "github"
       }
     },
+    "home-manager_2": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs-uconsole"
+        ]
+      },
+      "locked": {
+        "lastModified": 1779506708,
+        "narHash": "sha256-QOD/CNm196nCJRheux/URi4/HE66fthdOMqCJoPP1Y0=",
+        "owner": "nix-community",
+        "repo": "home-manager",
+        "rev": "3ee51fbdac8c8bdfe1e7e1fcaba6520a563f394f",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "ref": "release-25.11",
+        "repo": "home-manager",
+        "type": "github"
+      }
+    },
     "lix": {
       "inputs": {
         "flake-compat": "flake-compat",
@@ -144,6 +196,80 @@
         "type": "github"
       }
     },
+    "nixos-images": {
+      "inputs": {
+        "nixos-stable": [
+          "nixos-raspberrypi",
+          "nixpkgs"
+        ],
+        "nixos-unstable": [
+          "nixos-raspberrypi",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1747747741,
+        "narHash": "sha256-LUOH27unNWbGTvZFitHonraNx0JF/55h30r9WxqrznM=",
+        "owner": "nvmd",
+        "repo": "nixos-images",
+        "rev": "cbbd6db325775096680b65e2a32fb6187c09bbb4",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nvmd",
+        "ref": "sdimage-installer",
+        "repo": "nixos-images",
+        "type": "github"
+      }
+    },
+    "nixos-raspberrypi": {
+      "inputs": {
+        "argononed": "argononed",
+        "flake-compat": "flake-compat_2",
+        "nixos-images": "nixos-images",
+        "nixpkgs": [
+          "nixpkgs-uconsole"
+        ]
+      },
+      "locked": {
+        "lastModified": 1781324200,
+        "narHash": "sha256-JWqxN2Yle86+4Q+GFh12SvB92ZyLeqalVsN9lfMh6eQ=",
+        "owner": "gortium",
+        "repo": "nixos-raspberrypi",
+        "rev": "721a6e9e67dca3a23133db650b87018646bca3e6",
+        "type": "github"
+      },
+      "original": {
+        "owner": "gortium",
+        "ref": "cm5-cross-v1",
+        "repo": "nixos-raspberrypi",
+        "type": "github"
+      }
+    },
+    "nixos-uconsole": {
+      "inputs": {
+        "nixos-raspberrypi": [
+          "nixos-raspberrypi"
+        ],
+        "nixpkgs": [
+          "nixpkgs-uconsole"
+        ]
+      },
+      "locked": {
+        "lastModified": 1781476310,
+        "narHash": "sha256-jY6ujqLXNAWJGvt+pAuw1Wg/OiHRGd1B1Z7Czhiq7Q4=",
+        "owner": "gortium",
+        "repo": "nixos-uconsole",
+        "rev": "38a7fcbffbf2d2e122bc1e1c634fe25f66ecda13",
+        "type": "github"
+      },
+      "original": {
+        "owner": "gortium",
+        "ref": "pr/dcs-panel-detection",
+        "repo": "nixos-uconsole",
+        "type": "github"
+      }
+    },
     "nixpkgs": {
       "locked": {
         "lastModified": 1705033721,
@@ -176,6 +302,22 @@
         "type": "github"
       }
     },
+    "nixpkgs-uconsole": {
+      "locked": {
+        "lastModified": 1780952837,
+        "narHash": "sha256-Fwd1+spDtQ0hDyBwme6ufG3n4mY0UrjjFdYHv+G/Hds=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "e820eb4a444b46a19b2e03e8dfd2359439ff30fe",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixos-25.11",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
     "nixpkgs_2": {
       "locked": {
         "lastModified": 1774386573,
@@ -211,8 +353,12 @@
     "root": {
       "inputs": {
         "agenix": "agenix",
+        "home-manager": "home-manager_2",
         "lix": "lix",
-        "nixpkgs": "nixpkgs_2"
+        "nixos-raspberrypi": "nixos-raspberrypi",
+        "nixos-uconsole": "nixos-uconsole",
+        "nixpkgs": "nixpkgs_2",
+        "nixpkgs-uconsole": "nixpkgs-uconsole"
       }
     },
     "systems": {

flake.nix

@@ -12,10 +12,26 @@
       url = "git+https://git.lix.systems/lix-project/lix?ref=main";
       inputs.nixpkgs.follows = "nixpkgs";
     };
-    self.submodules = true;
+    nixpkgs-uconsole.url = "github:NixOS/nixpkgs/nixos-25.11";
+    nixos-uconsole = {
+      url = "github:gortium/nixos-uconsole/pr/dcs-panel-detection";
+      inputs.nixpkgs.follows = "nixpkgs-uconsole";
+      inputs.nixos-raspberrypi.follows = "nixos-raspberrypi";
+    };
+    nixos-raspberrypi = {
+      url = "github:gortium/nixos-raspberrypi/cm5-cross-v1";
+      inputs.nixpkgs.follows = "nixpkgs-uconsole";
+    };
+    home-manager = {
+      url = "github:nix-community/home-manager/release-25.11";
+      inputs.nixpkgs.follows = "nixpkgs-uconsole";
+    };
   };
 
-  outputs = { self, nixpkgs, agenix, lix, ... }@inputs:
+  outputs = { self, nixpkgs, agenix, lix
+            , nixpkgs-uconsole, nixos-uconsole, nixos-raspberrypi
+            , home-manager
+            , ... }@inputs:
     let
       system = "x86_64-linux";
       keys = import ./lib/keys.nix;
@@ -30,56 +46,151 @@
       pkgs = import nixpkgs {
         inherit system overlays;
         config.allowUnfree = true;
-        config.permittedInsecurePackages = [
-          "openclaw-2026.3.12"
-        ];
+        config.permittedInsecurePackages = [ "openclaw-2026.3.12" ];
       };
-
       devShell = import ./shells/nix_dev.nix {
         inherit pkgs system agenix;
       };
-    in
-      {
-        nixosConfigurations = {
-          lazyworkhorse = nixpkgs.lib.nixosSystem {
-            specialArgs = { inherit system self keys paths inputs; };
-            modules = [
-              {
-                nixpkgs.overlays = overlays;
-                nixpkgs.config.allowUnfree = true;
-                nixpkgs.config.rocmSupport = true;
-                nixpkgs.config.permittedInsecurePackages = [
-                  "openclaw-2026.3.12"
-                ];
-                nix.package = lix.packages.${system}.default;
-              }
-              agenix.nixosModules.default
-              ./hosts/lazyworkhorse/configuration.nix
-              ./hosts/lazyworkhorse/hardware-configuration.nix
-              ./modules/nixos/filesystem/hoardingcow-mount.nix
-              ./modules/nixos/services/docker_manager.nix
-              ./modules/nixos/services/open_code_server.nix
-              ./modules/nixos/services/ollama_init_custom_models.nix
-              ./modules/nixos/services/openclaw_node.nix
-              ./users/gortium.nix
-              ./users/ai-worker.nix
-            ];
-          };
 
-          cyt-pi = nixpkgs.lib.nixosSystem {
-            specialArgs = { inherit self keys paths inputs; };
-            modules = [
-              {
-                nixpkgs.overlays = overlays;
-                nixpkgs.config.allowUnfree = true;
-                nixpkgs.hostPlatform = "aarch64-linux";
-                nix.package = lix.packages."aarch64-linux".default;
-              }
-              ./hosts/cyt-pi/configuration.nix
-              ./hosts/cyt-pi/hardware-configuration.nix
-            ];
-          };
-        };
-        devShells.${system}.default = devShell;
+      # Cross-compile overlay fixes for Hyprland and deps on aarch64
+      uconsoleCrossOverlay = final: prev: {
+        libcamera = prev.libcamera.overrideAttrs (_: { meta.platforms = []; });
+        libcamera-rpi = prev.libcamera-rpi.overrideAttrs (_: { meta.platforms = []; });
+        libpisp = prev.libpisp.overrideAttrs (_: { meta.platforms = []; });
+        pipewire = prev.pipewire.overrideAttrs (old: {
+          buildInputs = builtins.filter
+            (x: !(x?pname && x.pname == "libcamera"))
+            (old.buildInputs or []);
+          mesonFlags = builtins.filter
+            (flag: !(builtins.isString flag && builtins.match ".*libcamera.*" flag != null))
+            (old.mesonFlags or []) ++ [ "-Dlibcamera=disabled" ];
+        });
+        gjs = prev.gjs.overrideAttrs (old: {
+          mesonFlags = (old.mesonFlags or []) ++ [ "-Dskip_gtk_tests=true" ];
+        });
+        hyprland = prev.hyprland.override { wrapRuntimeDeps = false; };
+        xdg-desktop-portal-hyprland = prev.xdg-desktop-portal-hyprland.overrideAttrs (old: {
+          preConfigure = (old.preConfigure or "") + ''
+            cmakeFlags="$cmakeFlags -Dhyprwayland-scanner_DIR=${prev.buildPackages.hyprwayland-scanner}/lib/cmake/hyprwayland-scanner" 2>/dev/null || true
+            export PKG_CONFIG_PATH="${prev.buildPackages.hyprwayland-scanner}/lib/pkgconfig:$PKG_CONFIG_PATH"
+          '';
+        });
       };
+
+      # RPI-specific pipewire libcamera fix (separate nixpkgs instance)
+      uconsoleRpiPipewireOverlay = final: prev: {
+        pipewire = prev.pipewire.overrideAttrs (old: {
+          buildInputs = builtins.filter
+            (x: !(x?pname && x.pname == "libcamera"))
+            (old.buildInputs or []);
+          mesonFlags = builtins.filter
+            (flag: !(builtins.isString flag && builtins.match ".*libcamera.*" flag != null))
+            (old.mesonFlags or []) ++ [ "-Dlibcamera=disabled" ];
+        });
+      };
+
+      # Shared uConsole CM5 module set — used by both toplevel and SD image
+      uconsoleBaseModules = [
+        {
+          nixpkgs.buildPlatform = "x86_64-linux";
+          nixpkgs.hostPlatform = "aarch64-linux";
+          nixpkgs.config.allowUnfree = true;
+          boot.loader.raspberry-pi.bootloader = "kernel";
+          nixpkgs.overlays = [ uconsoleCrossOverlay ];
+        }
+        nixos-raspberrypi.nixosModules.nixpkgs-rpi
+        ({ config, lib, pkgs, ... }: {
+          nixpkgs.overlays = [ uconsoleRpiPipewireOverlay ];
+        })
+        nixos-raspberrypi.nixosModules.raspberry-pi-5.base
+        nixos-raspberrypi.lib.inject-overlays
+        nixos-raspberrypi.lib.inject-overlays-global
+        nixos-uconsole.nixosModules.uconsole-cm5
+        ./modules/nixos/hardware/uconsole-cm5-aio-v2.nix
+        # Cross-compiled Lix for uConsole
+        ({ config, lib, pkgs, inputs, ... }: let
+          lixCross = import inputs.nixpkgs-uconsole {
+            localSystem = { system = "x86_64-linux"; };
+            crossSystem = { system = "aarch64-linux"; };
+            overlays = [ inputs.lix.overlays.default ];
+          };
+        in { nix.package = lixCross.lix; })
+        inputs.home-manager.nixosModules.home-manager
+        agenix.nixosModules.default
+        ./hosts/uconsole-cm5/configuration.nix
+        ./hosts/uconsole-cm5/hardware-configuration.nix
+        ./modules/nixos/services/wireguard-client.nix
+        ./modules/nixos/security/ai-worker-restricted.nix
+        ./users/gortium/gortium.nix
+        ./users/ai-worker/ai-worker.nix
+      ];
+    in {
+      nixosConfigurations = {
+        lazyworkhorse = nixpkgs.lib.nixosSystem {
+          specialArgs = { inherit system self keys paths inputs; };
+          modules = [
+            {
+              nixpkgs.overlays = overlays;
+              nixpkgs.config.allowUnfree = true;
+              nixpkgs.config.rocmSupport = true;
+              nixpkgs.config.permittedInsecurePackages = [ "openclaw-2026.3.12" ];
+              nix.package = lix.packages.${system}.default;
+            }
+        inputs.home-manager.nixosModules.home-manager
+            agenix.nixosModules.default
+            ./hosts/lazyworkhorse/configuration.nix
+            ./hosts/lazyworkhorse/hardware-configuration.nix
+            ./modules/nixos/filesystem/hoardingcow-mount.nix
+            ./modules/nixos/services/docker_manager.nix
+            ./modules/nixos/services/wireguard-client.nix
+            ./modules/nixos/services/ollama_init_custom_models.nix
+            ./modules/nixos/security/ai-worker-restricted.nix
+            ./users/gortium/gortium.nix
+            ./users/ai-worker/ai-worker.nix
+          ];
+        };
+
+        cyt-pi = nixpkgs.lib.nixosSystem {
+          specialArgs = { inherit self keys paths inputs; };
+          modules = [
+            {
+              nixpkgs.overlays = overlays;
+              nixpkgs.config.allowUnfree = true;
+              nixpkgs.hostPlatform = "aarch64-linux";
+              nix.package = lix.packages."aarch64-linux".default;
+            }
+            ./hosts/cyt-pi/configuration.nix
+            ./hosts/cyt-pi/hardware-configuration.nix
+            ./modules/nixos/services/wireguard-client.nix
+            ./users/gortium/gortium.nix
+          ];
+        };
+
+        uconsole-cm5 = nixpkgs-uconsole.lib.nixosSystem {
+          system = "aarch64-linux";
+          specialArgs = {
+            inherit self keys paths inputs;
+            nixos-raspberrypi = nixos-raspberrypi;
+            isCM4 = false;
+          };
+          modules = uconsoleBaseModules;
+        };
+      };
+
+      devShells.${system}.default = devShell;
+
+      packages.${system} = {
+        uconsole-cm5-image = (nixos-raspberrypi.lib.nixosSystem {
+          system = "aarch64-linux";
+          specialArgs = {
+            inherit self keys inputs;
+            nixos-raspberrypi = nixos-raspberrypi;
+            isCM4 = false;
+          };
+          modules = uconsoleBaseModules ++ [
+            nixos-raspberrypi.nixosModules.sd-image
+          ];
+        }).config.system.build.sdImage;
+      };
+    };
 }

hosts/lazyworkhorse/configuration.nix

@@ -9,7 +9,7 @@
   hoardingcow-mount.enable = true;
 
   # Flakesss
-  nix.settings.experimental-features = [ "nix-command" "flakes" "flake-self-attrs" ];
+  nix.settings.experimental-features = [ "nix-command" "flakes" "flake-self-attrs" "ca-derivations" ];
   nix.settings.trusted-users = [ "root" "gortium" ];
 
   # Garbage collection
@@ -36,7 +36,7 @@
     "transparent_hugepage=always" # because mucho ram
   ];
   # 2. Load the specific drivers found by sensors-detect
-  boot.kernelModules = [ "nct6775" "lm96163" ];
+  boot.kernelModules = [ "nct6775" "lm96163" "iptable_nat" "iptable_filter" ];
   # 3. Force the nct6775 driver to recognize the chip if it's stubborn
   boot.extraModprobeConfig = ''
     options nct6775 force_id=0xd280
@@ -49,6 +49,14 @@
   networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
   networking.hostId = "deadbeef";
 
+  # WireGuard VPN client -- module, always up, connects to wg-easy server
+  gortium.wireguard-client = {
+    enable = true;
+    vpnIp = "10.8.0.3/24";
+    privateKeyFile = config.age.secrets.wireguard_private_key.path;
+    presharedKeyFile = config.age.secrets.wireguard_preshared_key.path;
+  };
+
   # Set your time zone.
   time.timeZone = "America/Montreal";
 
@@ -158,7 +166,7 @@
     settings = {
       PasswordAuthentication = false;
       KbdInteractiveAuthentication = false;
-      PermitRootLogin = "prohibit-password"; 
+      # Additional hardening settings below in SERVER HARDENING section
     };
     hostKeys = [
       {
@@ -187,6 +195,7 @@
     ai = {
       path = self + "/assets/compose/ai";
       envFile = config.age.secrets.containers_env.path;
+      ports = [ 22000 ];  # Syncthing TCP sync
     };
 
     cloudstorage = {
@@ -221,6 +230,11 @@
       path = self + "/assets/compose/homepage";
     };
 
+    vpn = {
+      path = self + "/assets/compose/vpn";
+      envFile = config.age.secrets.containers_env.path;
+    };
+
     # tak = {
     #   path = self + "/assets/compose/tak";
     # };
@@ -264,6 +278,20 @@
         mode = "0440";
         path = "/run/secrets/openclaw_gateway_token";
       };
+      wireguard_private_key = {
+        file = ../../secrets/wireguard_private_key.age;
+        owner = "root";
+        group = "root";
+        mode = "0400";
+        path = "/run/secrets/wireguard_private_key";
+      };
+      wireguard_preshared_key = {
+        file = ../../secrets/wireguard_preshared_key.age;
+        owner = "root";
+        group = "root";
+        mode = "0400";
+        path = "/run/secrets/wireguard_preshared_key";
+      };
     };
   };
 
@@ -308,6 +336,203 @@
   # Or disable the firewall altogether.
   # networking.firewall.enable = false;
 
+  # =============================================================================
+  # SERVER HARDENING - Firewall, Fail2ban, SSH, Kernel
+  # =============================================================================
+  
+  # Firewall - default deny, explicit allow
+  networking.firewall = {
+    # Enable firewall with default deny policy (NixOS firewall denies all by default)
+    enable = true;
+    allowPing = true;
+    
+    # Only essential ports exposed to internet
+    allowedTCPPorts = [
+      2424  # SSH (non-standard port)
+      2222  # Gitea (version control)
+      80    # HTTP (Traefik redirect)
+      443   # HTTPS (Traefik)
+      # 8000  # Portainer - REVIEW: internal only?
+      # 4242  # Coms - REVIEW: internal only?
+      # 5000  # TAK API - REVIEW: internal only?
+      # 8087  # TAK Connect - REVIEW: internal only?
+      # 8089  # TAK Management - REVIEW: internal only?
+    ];
+    
+    allowedUDPPorts = [
+      51820 # WireGuard VPN
+    ];
+    
+    # Rate limiting and attack prevention
+    extraCommands = ''
+      # 1. Wipe the INPUT chain clean at the start of every activation
+      iptables -F INPUT
+      
+      # Rate limit SSH connections (max 20 new connections per 60 seconds)
+      iptables -A INPUT -p tcp --dport 2424 -m state --state NEW -m recent --set
+      iptables -A INPUT -p tcp --dport 2424 -m state --state NEW -m recent --update --seconds 60 --hitcount 20 -j DROP
+      
+      # Rate limit HTTP/HTTPS (protects Traefik)
+      iptables -A INPUT -p tcp --dport 80 -m state --state NEW -m limit --limit 25/minute --limit-burst 100 -j ACCEPT
+      iptables -A INPUT -p tcp --dport 443 -m state --state NEW -m limit --limit 25/minute --limit-burst 100 -j ACCEPT
+      
+      # Drop invalid packets
+      iptables -A INPUT -m state --state INVALID -j DROP
+      
+      # Log dropped packets (rate limited)
+      iptables -A INPUT -m limit --limit 5/min -j LOG --log-prefix "IPTables-Dropped: " --log-level 4
+
+      # 3. CRITICAL: Re-link the NixOS default firewall chain
+      # Without this line, the 'allowedTCPPorts' in your Nix config will be ignored!
+      iptables -A INPUT -j nixos-fw
+    '';
+  };
+
+  # Fail2ban - automatic IP banning
+  services.fail2ban = {
+    enable = true;
+    maxretry = 3;
+    bantime = "1h";
+    banaction = "iptables-multiport";
+    
+    jails = {
+      # SSH brute force protection (uses systemd journal backend)
+      sshd = {
+        enabled = true;
+        settings = {
+          filter = "sshd";
+          port = "2424";
+          maxretry = 3;
+          bantime = "1h";
+        };
+      };
+      
+      # Recidive - ban repeat offenders for 1 week
+      recidive = {
+        enabled = true;
+        settings = {
+          filter = "recidive";
+          logpath = "/var/log/fail2ban.log";
+          bantime = "1w";
+          findtime = "1d";
+          maxretry = 3;
+        };
+      };
+      
+      # HTTP authentication failures (Traefik)
+      http-auth = {
+        enabled = true;
+        settings = {
+          filter = "traefik-auth";
+          port = "80,443";
+          logpath = "/var/log/traefik/access.log";
+          maxretry = 5;
+          bantime = "1h";
+        };
+      };
+      
+      # HTTP scanning/attacks (Traefik)
+      http-botsearch = {
+        enabled = true;
+        settings = {
+          filter = "traefik-botsearch";
+          port = "80,443";
+          logpath = "/var/log/traefik/access.log";
+          maxretry = 2;
+          bantime = "2h";
+        };
+      };
+    };
+  };
+  
+  # Custom fail2ban filters for Traefik
+  environment.etc."fail2ban/filter.d/traefik-auth.conf".text = ''
+    [Definition]
+    failregex = ^<HOST> -.*"(GET|POST|HEAD|PUT|DELETE).*" (401|403) \d+.*$
+    ignoreregex =
+  '';
+  
+  environment.etc."fail2ban/filter.d/traefik-botsearch.conf".text = ''
+    [Definition]
+    failregex = ^<HOST> -.*"(GET|POST|HEAD|PUT|DELETE).*" 404 \d+.*$
+                ^<HOST> -.*"(GET|POST|HEAD|PUT|DELETE).*/(\.|wp-|php|admin|login|xmlrpc|\.env|\.git|\.aws|\.azure).*" \d+.*$
+    ignoreregex =
+  '';
+
+  # SSH hardening
+  services.openssh.settings = {
+    PermitRootLogin = "no";
+    MaxAuthTries = 3;
+    MaxSessions = 20;
+    LoginGraceTime = 30;
+    ClientAliveInterval = 300;
+    ClientAliveCountMax = 2;
+    PermitEmptyPasswords = "no";
+    ChallengeResponseAuthentication = "no";
+    UsePAM = true;
+    LogLevel = "VERBOSE";
+    X11Forwarding = false;
+    AllowTcpForwarding = "no";
+    AllowAgentForwarding = "no";
+    PermitTunnel = "no";
+  };
+
+  # Kernel network hardening
+  boot.kernel.sysctl = {
+    # IP Spoofing protection
+    "net.ipv4.conf.all.rp_filter" = 1;
+    "net.ipv4.conf.default.rp_filter" = 1;
+    
+    # Ignore ICMP broadcasts
+    "net.ipv4.icmp_echo_ignore_broadcasts" = 1;
+    
+    # Disable source routing
+    "net.ipv4.conf.all.accept_source_route" = 0;
+    "net.ipv4.conf.default.accept_source_route" = 0;
+    "net.ipv6.conf.all.accept_source_route" = 0;
+    "net.ipv6.conf.default.accept_source_route" = 0;
+    
+    # Disable redirects
+    "net.ipv4.conf.all.send_redirects" = 0;
+    "net.ipv4.conf.default.send_redirects" = 0;
+    
+    # SYN flood protection
+    "net.ipv4.tcp_syncookies" = 1;
+    "net.ipv4.tcp_max_syn_backlog" = 2048;
+    "net.ipv4.tcp_synack_retries" = 2;
+    "net.ipv4.tcp_syn_retries" = 5;
+    
+    # Log martian packets
+    "net.ipv4.conf.all.log_martians" = 1;
+    "net.ipv4.conf.default.log_martians" = 1;
+    
+    # Ignore redirects
+    "net.ipv4.conf.all.accept_redirects" = 0;
+    "net.ipv4.conf.default.accept_redirects" = 0;
+    "net.ipv4.conf.all.secure_redirects" = 0;
+    "net.ipv4.conf.default.secure_redirects" = 0;
+    "net.ipv6.conf.all.accept_redirects" = 0;
+    "net.ipv6.conf.default.accept_redirects" = 0;
+    
+    # Connection tuning
+    "net.core.somaxconn" = 4096;
+    "net.core.netdev_max_backlog" = 65536;
+    "net.ipv4.tcp_max_orphans" = 65536;
+    "net.ipv4.tcp_fin_timeout" = 15;
+    "net.ipv4.tcp_keepalive_time" = 300;
+    "net.ipv4.tcp_keepalive_probes" = 5;
+    "net.ipv4.tcp_keepalive_intvl" = 15;
+  };
+
+  # Audit logging
+  security.auditd.enable = true;
+  
+  # Fail2ban log directory
+  systemd.tmpfiles.rules = [
+    "d /var/log/fail2ban 0755 root root -"
+    "d /var/log/traefik 0755 root root -"
+  ];
+
   # Copy the NixOS configuration file and link it from the resulting system
   # (/run/current-system/configuration.nix). This is useful in case you
   # accidentally delete configuration.nix.

hosts/uconsole-cm5/configuration.nix

@@ -0,0 +1,58 @@
+{ config, lib, pkgs, keys, ... }:
+
+{
+  networking.hostName = "uConsole";
+  time.timeZone = "America/Montreal";
+  i18n.defaultLocale = "en_CA.UTF-8";
+  system.stateVersion = "25.11";
+
+  # SSH — root access avec clés gortium + ai-worker
+  services.openssh = {
+    enable = true;
+    settings = {
+      PermitRootLogin = lib.mkForce "prohibit-password";
+      PasswordAuthentication = lib.mkForce false;
+    };
+  };
+
+  users.users.root.openssh.authorizedKeys.keys = with keys; [
+    users.gortium.main
+    users.ai-worker.main
+  ];
+
+  # AI worker user (Hermes SSH access)
+
+  # Age secret for gortium password (file created by user)
+  age.secrets.gortium_password = {
+    file = ../../secrets/gortium_password.age;
+  };
+
+  # Password file for gortium (merges with users/gortium/default.nix)
+
+  # WiFi via NetworkManager + secret agenix
+  networking.networkmanager.enable = true;
+
+  # Firmware
+  hardware.enableRedistributableFirmware = true;
+
+  # Hyprland Wayland compositor (manual start — no SDDM)
+  programs.hyprland = {
+    enable = true;
+    xwayland.enable = true;
+  };
+  # HackerGadgets AIO v2 board
+  hardware.uconsole-cm5-aio-v2 = {
+    enable = true;
+
+    # Rails actifs au boot
+    bootRails = {
+      GPS  = false;
+      LORA = false;
+      SDR  = false;
+      USB  = false;
+    };
+
+    enableGPS = false;
+  };
+
+}

hosts/uconsole-cm5/hardware-configuration.nix

@@ -0,0 +1,30 @@
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports = [
+    (modulesPath + "/installer/scan/not-detected.nix")
+  ];
+
+  boot.initrd.availableKernelModules = [ "xhci_pci" "usbhid" "usb_storage" "sdhci_pci" "nvme" ];
+  boot.initrd.kernelModules = [ ];
+  boot.extraModulePackages = [ ];
+
+  # SD card partitions (nixos-uconsole layout)
+  fileSystems."/" = {
+    device = "/dev/disk/by-label/NIXOS_SD";
+    fsType = "ext4";
+    options = [ "noatime" ];
+  };
+
+  fileSystems."/boot/firmware" = {
+    device = "/dev/disk/by-label/FIRMWARE";
+    fsType = "vfat";
+    options = [ "fmask=0022" "dmask=0022" ];
+  };
+
+  swapDevices = [ ];
+
+  nixpkgs.hostPlatform = lib.mkDefault "aarch64-linux";
+  hardware.enableRedistributableFirmware = true;
+  powerManagement.cpuFreqGovernor = lib.mkDefault "ondemand";
+}

modules/nixos/hardware/uconsole-cm5-aio-v2.nix

@@ -0,0 +1,169 @@
+{ config, lib, pkgs, ... }:
+
+with lib;
+
+let
+  cfg = config.hardware.uconsole-cm5-aio-v2;
+
+  # GPIO pin map matching the AIO v2 board hardware
+  #   SDR  (RTL-SDR):  GPIO 7
+  #   LoRa (SX1262) :  GPIO 16
+  #   USB Hub Interne: GPIO 23
+  #   GPS (GNSS)    :  GPIO 27
+  gpioMap = {
+    GPS  = 27;
+    LORA = 16;
+    SDR  = 7;
+    USB  = 23;
+  };
+
+  # Generate a script that applies boot rail states via pinctrl
+  applyRailsScript = pkgs.writeShellScript "apply-aio-v2-rails" (
+    ''
+      set -e
+      PINCTRL=${pkgs.libraspberrypi}/bin/pinctrl
+    ''
+    + concatStringsSep "" (mapAttrsToList (name: pin: ''
+      if [ "${if cfg.bootRails.${name} then "1" else "0"}" = "1" ]; then
+        echo "AIO v2: ${name} (GPIO${toString pin}) -> ON"
+        $PINCTRL set ${toString pin} op dh
+      else
+        echo "AIO v2: ${name} (GPIO${toString pin}) -> OFF"
+        $PINCTRL set ${toString pin} op dl
+      fi
+    '') gpioMap)
+  );
+
+  # aiov2_ctl CLI tool -- fetched from GitHub, available as `aiov2_ctl`
+  aiov2CtlPkg = pkgs.stdenv.mkDerivation rec {
+    pname = "aiov2_ctl";
+    version = "0-unstable-2026-06-16";
+
+    src = pkgs.fetchFromGitHub {
+      owner = "hackergadgets";
+      repo = "aiov2_ctl";
+      rev = "main";
+      hash = "sha256-hqOvS1K5pDVXAroUE50i5R9YqRgC2U3fzby6uuB67K0=";
+    };
+
+    dontUnpack = true;
+
+    installPhase = ''
+      mkdir -p $out/bin $out/share/aiov2_ctl/img
+      cp $src/aiov2_ctl.py $out/bin/aiov2_ctl
+      chmod +x $out/bin/aiov2_ctl
+      patchShebangs $out/bin/aiov2_ctl
+      substituteInPlace $out/bin/aiov2_ctl \
+        --replace-fail '"/usr/local/share/aiov2_ctl/img/' '"'$out'/share/aiov2_ctl/img/'
+      cp -r $src/img/* $out/share/aiov2_ctl/img/
+    '';
+
+    meta = {
+      description = "HackerGadgets uConsole AIO v2 GPIO control and telemetry tool";
+      homepage = "https://github.com/hackergadgets/aiov2_ctl";
+      license = lib.licenses.mit;
+      maintainers = with lib.maintainers; [ ];
+      platforms = [ "aarch64-linux" ];
+    };
+  };
+in {
+  options.hardware.uconsole-cm5-aio-v2 = {
+    enable = mkEnableOption "HackerGadgets uConsole AIO v2 board support";
+
+    bootRails = {
+      GPS = mkOption {
+        type = types.bool;
+        default = false;
+        description = "Enable GPS module at boot (GPIO 27)";
+      };
+      LORA = mkOption {
+        type = types.bool;
+        default = false;
+        description = "Enable LoRa module at boot (GPIO 16)";
+      };
+      SDR = mkOption {
+        type = types.bool;
+        default = false;
+        description = "Enable SDR module at boot (GPIO 7)";
+      };
+      USB = mkOption {
+        type = types.bool;
+        default = false;
+        description = "Enable internal USB hub at boot (GPIO 23)";
+      };
+    };
+
+    package = mkOption {
+      type = types.package;
+      default = aiov2CtlPkg;
+      defaultText = literalExpression "aiov2CtlPkg";
+      description = "aiov2_ctl package to use";
+    };
+
+    enableGPS = mkOption {
+      type = types.bool;
+      default = false;
+      description = ''
+        Enable GPS UART (/dev/ttyAMA0 at 9600 baud).
+        Requires enabling UART on the CM5 via boot.kernelParams.
+      '';
+    };
+
+    enableGUI = mkOption {
+      type = types.bool;
+      default = false;
+      description = ''
+        Enable the system tray GUI for aiov2_ctl.
+        Requires a desktop environment with system tray support.
+      '';
+    };
+  };
+
+  config = mkIf cfg.enable {
+    # Package the aiov2_ctl tool + pinctrl
+    environment.systemPackages = with pkgs; [
+      cfg.package
+      libraspberrypi      # provides pinctrl
+    ];
+
+    # Boot rail systemd oneshot service
+    systemd.services.aiov2-rails-boot = {
+      description = "Apply AIO v2 GPIO rail boot states";
+      after = [ "local-fs.target" ];
+      wants = [ "local-fs.target" ];
+      before = [ "multi-user.target" ];
+      wantedBy = [ "multi-user.target" ];
+      serviceConfig = {
+        Type = "oneshot";
+        ExecStart = "${applyRailsScript}";
+        RemainAfterExit = true;
+      };
+    };
+
+    # GPS configuration
+    boot.kernelParams = mkIf cfg.enableGPS [ "uart0=on" ];
+
+    users.users = mkIf cfg.enableGPS {
+      gortium = {
+        extraGroups = [ "dialout" ];
+      };
+    };
+
+    # GUI autostart (XDG)
+    systemd.user.services.aiov2-ctl-gui = mkIf cfg.enableGUI {
+      description = "AIO v2 System Tray Controller";
+      after = [ "graphical-session.target" ];
+      wants = [ "graphical-session.target" ];
+      wantedBy = [ "graphical-session.target" ];
+      serviceConfig = {
+        Type = "simple";
+        ExecStart = "${cfg.package}/bin/aiov2_ctl --gui";
+        Restart = "on-failure";
+        RestartSec = 5;
+      };
+      environment = {
+        AIOV2_CTL_DEBUG = "0";
+      };
+    };
+  };
+}

modules/nixos/security/README-ai-worker.md

@@ -0,0 +1,105 @@
+# AI Worker Restricted Access
+
+This module provides SSH access for the AI worker (hermes-agent) to run ollama benchmarks on the host.
+
+## Security Model
+
+The `ai-worker` user has:
+
+### Filesystem Access
+- **Home directory**: `/home/ai-worker` (standard user home)
+- **No bind mounts**: Cannot access `/home/gortium/infra` or other host files
+- **Cannot access**: Any files outside standard system paths
+
+### Sudo Access
+- **NONE**: ai-worker has no sudo privileges
+- Cannot run `nh`, `nixos-rebuild`, `nixpkgs-fmt`, or `nix` with elevated permissions
+
+### Docker Access
+- Member of `docker` group - can run `docker` and `docker exec` commands
+- Primary use: `docker exec ollama ollama ...` for benchmarking
+- Can run `docker exec --privileged ollama rocm-smi ...` for VRAM monitoring
+
+## Workflow: SSH + Docker Benchmarking
+
+The AI worker connects from the Hermes container to the host via SSH, runs ollama benchmarks, then returns to save results.
+
+### Example Workflow
+
+```bash
+# From Hermes container, SSH to host
+ssh -i /path/to/ssh/key ai-worker@host.docker.internal
+
+# On host, run ollama benchmarks via docker
+docker exec ollama ollama pull devstral-small-2:24b
+
+# Create test modelfile
+docker exec ollama bash -c 'cat <<EOF > /root/.ollama/test.modelfile
+FROM devstral-small-2:24b
+PARAMETER num_ctx 65536
+PARAMETER num_gpu 99
+PARAMETER flash_attn true
+EOF'
+
+# Create and test model
+docker exec ollama ollama create test-model -f /root/.ollama/test.modelfile
+docker exec ollama ollama run test-model "Write a Python async function"
+
+# Check VRAM usage
+docker exec --privileged ollama rocm-smi --showmeminfo vram
+
+# Cleanup
+docker exec ollama ollama rm test-model
+
+# Exit SSH, return to Hermes container
+exit
+
+# Save results in Hermes container
+# /opt/data/ai-optimizer/state.json
+# /opt/data/ai-optimizer/results.csv
+```
+
+## SSH Access
+
+Connect as:
+```bash
+ssh ai-worker@lazyworkhorse
+```
+
+The working directory will be `/home/ai-worker`. No infra repo access.
+
+## Verification
+
+Check ai-worker permissions:
+```bash
+# On the host, as root or gortium:
+sudo -u ai-worker sudo -l
+# Should show: no sudo access
+
+# Check docker group membership
+groups ai-worker
+# Should show: ai-worker docker
+```
+
+## Troubleshooting
+
+If ai-worker cannot run docker commands:
+```bash
+# Check docker group membership
+groups ai-worker
+
+# Verify ollama container is running
+docker ps | grep ollama
+
+# Test docker access
+sudo -u ai-worker docker exec ollama ollama list
+```
+
+If SSH connection fails:
+```bash
+# Check SSH key is authorized
+cat /home/ai-worker/.ssh/authorized_keys
+
+# Check SSH service
+systemctl status sshd
+```

modules/nixos/security/ai-worker-restricted.nix

@@ -0,0 +1,17 @@
+{ config, pkgs, lib, ... }:
+
+with lib;
+
+{
+  options.services.aiWorkerAccess = mkOption {
+    type = types.bool;
+    default = false;
+    description = "Enable AI worker SSH access with docker group membership for ollama benchmarking";
+  };
+
+  config = mkIf config.services.aiWorkerAccess {
+    # ai-worker is member of docker group - can run docker commands via SSH
+    # No bind mounts, no sudo access - docker-only for ollama benchmarking
+    users.groups.docker.members = [ "ai-worker" ];
+  };
+}

modules/nixos/services/default.nix

@@ -0,0 +1,5 @@
+{
+  imports = [
+    ./systemd
+  ];
+}

modules/nixos/services/ollama_init_custom_models.nix

@@ -1,45 +1,87 @@
 { pkgs, ... }: {
   systemd.services.init-ollama-model = {
     description = "Initialize LLM models with extra context in Ollama Docker";
-    after = [ "docker-ollama.service" ];
+    
+    # On s'assure que Docker tourne avant de lancer ce script
+    after = [ "docker.service" ];
     wantedBy = [ "multi-user.target" ];
+    
     script = ''
-      # Wait for Ollama
-      while ! ${pkgs.curl}/bin/curl -s http://localhost:11434/api/tags > /dev/null; do
-        sleep 2
-      done
+      # Fonction de création asynchrone pour ne pas bloquer le démarrage
+      (
+        echo "Starting asynchronous Ollama initialization..."
+        
+        # Attente d'Ollama (maximum 120 secondes pour éviter une boucle infinie)
+        TIMEOUT=60
+        COUNT=0
+        while ! ${pkgs.curl}/bin/curl -s -f http://127.0.0.1:11434/api/tags > /dev/null; do
+          if [ $COUNT -ge $TIMEOUT ]; then
+            echo "Ollama did not become ready in time. Exiting."
+            exit 1
+          fi
+          echo "Waiting for Ollama API to be reachable..."
+          sleep 5
+          COUNT=$((COUNT + 5))
+        done
 
-      create_model_if_missing() {
-        local model_name=$1
-        local base_model=$2
-        if ! ${pkgs.docker}/bin/docker exec ollama ollama list | grep -q "$model_name"; then
-          echo "$model_name not found, creating from $base_model..."
-          ${pkgs.docker}/bin/docker exec ollama sh -c "cat <<EOF > /root/.ollama/$model_name.modelfile
+        create_model_if_missing() {
+          local model_name=$1
+          local base_model=$2
+          
+          # Vérification robuste via l'API HTTP d'Ollama plutôt que docker exec (évite les conflits de tty)
+          if ! ${pkgs.curl}/bin/curl -s http://127.0.0.1:11434/api/tags | ${pkgs.jq}/bin/jq -e ".models[] | select(.name == \"$model_name\")" > /dev/null; then
+            echo "$model_name not found, creating from $base_model..."
+            
+            # Utilisation d'un fichier temporaire sur l'hôte pour l'injecter proprement dans Docker
+            TMP_FILE=$(mktemp)
+            cat <<EOF > "$TMP_FILE"
 FROM $base_model
+TEMPLATE """{{- if .System }}
+[SYSTEM_PROMPT]
+{{ .System }}
+[/SYSTEM_PROMPT]
+{{- end }}
+{{- range .Messages }}
+{{- if eq .Role "user" }}
+[INST]
+{{ .Content }}
+[/INST]
+{{- else if eq .Role "assistant" }}
+{{ .Content }}
+{{- end }}
+{{- end }}"""
 PARAMETER num_ctx 131072
 PARAMETER num_predict 4096
 PARAMETER num_keep 1024
 PARAMETER repeat_penalty 1.1
 PARAMETER top_k 40
-PARAMETER stop \"[INST]\"
-PARAMETER stop \"[/INST]\"
-PARAMETER stop \"</s>\"
-EOF"
-          ${pkgs.docker}/bin/docker exec ollama ollama create "$model_name" -f "/root/.ollama/$model_name.modelfile"
-        else
-          echo "$model_name already exists, skipping."
-        fi
-      }
+PARAMETER stop "[INST]"
+PARAMETER stop "[/INST]"
+PARAMETER stop "</s>"
+EOF
 
-      # Create Nemotron
-      create_model_if_missing "nemotron-3-nano:30b-128k" "nemotron-3-nano:30b"
-      
-      # Create Devstral
-      create_model_if_missing "devstral-small-2:24b-128k" "devstral-small-2:24b" 
+            # Copie et création dans le conteneur
+            ${pkgs.docker}/bin/docker cp "$TMP_FILE" ollama:/tmp/model.modelfile
+            ${pkgs.docker}/bin/docker exec ollama ollama create "$model_name" -f /tmp/model.modelfile
+            ${pkgs.docker}/bin/docker exec ollama rm /tmp/model.modelfile
+            rm -f "$TMP_FILE"
+          else
+            echo "$model_name already exists, skipping."
+          fi
+        }
+
+        # Create Nemotron
+        create_model_if_missing "nemotron-3-nano:30b-128k" "nemotron-3-nano:30b"
+        
+        # Create Devstral
+        create_model_if_missing "devstral-small-2:24b-128k" "devstral-small-2:24b" 
+        
+      ) &
     '';
+
     serviceConfig = {
-      Type = "oneshot";
-      RemainAfterExit = true;
+      Type = "forking"; # Permet à systemd de savoir que le script passe en arrière-plan via '&'
+      User = "root";
     };
   };
 }

modules/nixos/services/staging-vm.nix.bak

@@ -0,0 +1,275 @@
+{ config, pkgs, lib, ... }:
+
+with lib;
+
+let
+  cfg = config.services.stagingVm;
+in
+{
+  options.services.stagingVm = {
+    enable = mkOption {
+      type = types.bool;
+      default = false;
+      description = "Enable KVM/libvirt staging VM for compose PR testing";
+    };
+
+    vmName = mkOption {
+      type = types.str;
+      default = "compose-test-vm";
+      description = "Name of the staging VM";
+    };
+
+    memory = mkOption {
+      type = types.str;
+      default = "4096";
+      description = "RAM allocated to the staging VM (MB)";
+    };
+
+    vcpus = mkOption {
+      type = types.int;
+      default = 2;
+      description = "Number of vCPUs for the staging VM";
+    };
+
+    storagePath = mkOption {
+      type = types.str;
+      default = "/var/lib/libvirt/images";
+      description = "Path for libvirt storage pool";
+    };
+
+    dataPath = mkOption {
+      type = types.str;
+      default = "/var/lib/staging-vm";
+      description = "Path for compose test data (PR checkouts, test results)";
+    };
+  };
+
+  config = mkIf cfg.enable {
+    # Enable libvirt daemon
+    virtualisation.libvirtd = {
+      enable = true;
+      qemu = {
+        package = pkgs.qemu_kvm;
+        runAsRoot = true;
+        swtpm.enable = true;
+        ovmf = {
+          enable = true;
+          packages = [ pkgs.OVMFFull.fd ];
+        };
+      };
+    };
+
+    # Kernel modules + groups already handled in configuration.nix
+
+    # libvirt NAT network (192.168.122.0/24)
+    environment.etc."libvirt/qemu/networks/default.xml" = {
+      text = ''
+        <network>
+          <name>default</name>
+          <uuid>2b8f7a3c-9e5d-4a1f-bc3d-6e7a8f9b0c1d</uuid>
+          <forward mode='nat'>
+            <nat>
+              <port start='1024' end='65535'/>
+            </nat>
+          </forward>
+          <bridge name='virbr0' stp='on' delay='0'/>
+          <mac address='52:54:00:12:34:56'/>
+          <ip address='192.168.122.1' netmask='255.255.255.0'>
+            <dhcp>
+              <range start='192.168.122.2' end='192.168.122.254'/>
+            </dhcp>
+          </ip>
+        </network>
+      '';
+      # Autostart the network so it comes up on boot
+      mode = "0644";
+    };
+
+    # Ensure the default network is defined and autostarted
+    systemd.services.libvirtd = {
+      postStart = ''
+        ${pkgs.libvirt}/bin/virsh net-define /etc/libvirt/qemu/networks/default.xml 2>/dev/null || true
+        ${pkgs.libvirt}/bin/virsh net-autostart default 2>/dev/null || true
+        ${pkgs.libvirt}/bin/virsh net-start default 2>/dev/null || true
+      '';
+    };
+
+    # Storage directory for VM images
+    systemd.tmpfiles.rules = [
+      "d ${cfg.storagePath} 0755 root root -"
+      "d ${cfg.dataPath} 0755 root root -"
+    ];
+
+    # Ensure storage pool exists in libvirt
+    systemd.services.libvirtd.postStart = mkAfter ''
+      ${pkgs.libvirt}/bin/virsh pool-define-as default dir --target "${cfg.storagePath}" 2>/dev/null || true
+      ${pkgs.libvirt}/bin/virsh pool-autostart default 2>/dev/null || true
+      ${pkgs.libvirt}/bin/virsh pool-start default 2>/dev/null || true
+    '';
+
+    # Firewall: allow traffic from virbr0 to host and outbound NAT
+    networking.firewall = {
+      extraCommands = ''
+        # Allow inbound DHCP/DNS from libvirt guests
+        iptables -I INPUT -i virbr0 -p udp --dport 67:68 -j ACCEPT
+        iptables -I INPUT -i virbr0 -p tcp --dport 53 -j ACCEPT
+        iptables -I INPUT -i virbr0 -p udp --dport 53 -j ACCEPT
+        
+        # Allow established/related traffic back to guests
+        iptables -I FORWARD -i virbr0 -o virbr0 -j ACCEPT
+        iptables -I FORWARD -o virbr0 -j ACCEPT
+        iptables -I FORWARD -i virbr0 -j ACCEPT
+      '';
+    };
+
+    # Packages needed for VM management
+    environment.systemPackages = with pkgs; [
+      libvirt
+      qemu_kvm
+      virt-manager  # optional GUI for manual management
+      OVMFFull
+      swtpm
+    ];
+
+    # Enable docker in the host (already enabled, but ensure for compose testing)
+    virtualisation.docker.enable = true;
+
+    # Helper script: pr-test-vm
+    # Usage:
+    #   pr-test-vm build    — build the staging VM derivation
+    #   pr-test-vm start    — boot the VM with a compose PR branch
+    #   pr-test-vm stop     — graceful shutdown
+    #   pr-test-vm destroy  — force stop + delete VM
+    #   pr-test-vm ssh      — SSH into the running VM
+    systemd.tmpfiles.rules = mkAfter [
+      "d ${cfg.dataPath}/scripts 0755 root root -"
+    ];
+
+    environment.systemPackages = [ (pkgs.writeShellScriptBin "pr-test-vm" ''
+      set -euo pipefail
+
+      DATA="${cfg.dataPath}"
+      VM_NAME="${cfg.vmName}"
+      VM_IMAGE="''${DATA}/''${VM_NAME}.qcow2"
+      VM_PORT=2223
+
+      build_vm() {
+        echo "==> Building NixOS staging VM for compose testing..."
+        # Build the VM config inline — a minimal NixOS with Docker + SSH
+        cat > /tmp/staging-vm-config.nix << 'NIXEOF'
+          { config, pkgs, lib, ... }: {
+            boot.loader.grub.devices = [ "/dev/vda" ];
+            boot.loader.timeout = 0;
+
+            # Minimal kernel
+            boot.kernelParams = [ "console=ttyS0" ];
+            boot.initrd.kernelModules = [ "virtio_blk" "virtio_net" "virtio_pci" ];
+
+            # SSH access
+            services.openssh = {
+              enable = true;
+              settings.PasswordAuthentication = false;
+              settings.PermitRootLogin = "prohibit-password";
+            };
+
+            # Docker for compose testing
+            virtualisation.docker.enable = true;
+
+            # Network (DHCP via virbr0)
+            networking.useDHCP = true;
+            networking.firewall.enable = false;
+
+            # Users
+            users.users.root.openssh.authorizedKeys.keys = [
+              "$(cat /root/.ssh/authorized_keys 2>/dev/null || echo 'ssh-ed25519 AAAAC3... placeholder')"
+            ];
+            users.users.testrunner = {
+              isNormalUser = true;
+              extraGroups = [ "docker" ];
+              openssh.authorizedKeys.keys = [
+                "$(cat /root/.ssh/authorized_keys 2>/dev/null || echo 'ssh-ed25519 AAAAC3... placeholder')"
+              ];
+            };
+
+            # Git + compose tools
+            environment.systemPackages = with pkgs; [ git docker-compose curl ];
+
+            system.stateVersion = "24.11";
+          }
+        NIXEOF
+
+        nixos-rebuild build-vm -I nixpkgs=channel:nixos-unstable \
+          --arg configuration 'import /tmp/staging-vm-config.nix' \
+          --out-link "''${DATA}/vm-result"
+        echo "==> VM built. Run 'pr-test-vm start' to boot."
+      }
+
+      start_vm() {
+        if [ -f "''${VM_IMAGE}" ]; then
+          echo "==> Booting existing VM..."
+        else
+          echo "==> Creating VM image..."
+          ${pkgs.qemu_kvm}/bin/qemu-img create -f qcow2 "''${VM_IMAGE}" 20G
+        fi
+
+        # Check if already running
+        if ${pkgs.libvirt}/bin/virsh list --name 2>/dev/null | grep -q "''${VM_NAME}"; then
+          echo "==> VM already running."
+          exit 0
+        fi
+
+        ${pkgs.qemu_kvm}/bin/qemu-system-x86_64 \
+          -name "''${VM_NAME}" \
+          -machine q35,accel=kvm \
+          -cpu host \
+          -smp ${toString cfg.vcpus} \
+          -m ${cfg.memory} \
+          -drive file="''${VM_IMAGE}",if=virtio,format=qcow2 \
+          -netdev user,id=net0,hostfwd=tcp::''${VM_PORT}-:22 \
+          -device virtio-net-pci,netdev=net0 \
+          -nographic \
+          -serial mon:stdio \
+          -pidfile "''${DATA}/''${VM_NAME}.pid" \
+          -daemonize
+
+        echo "==> VM booting... SSH on port ''${VM_PORT}"
+        echo "==> Wait for it: ssh -p ''${VM_PORT} testrunner@localhost"
+      }
+
+      stop_vm() {
+        PIDFILE="''${DATA}/''${VM_NAME}.pid"
+        if [ -f "''${PIDFILE}" ]; then
+          PID=$(cat "''${PIDFILE}")
+          kill "''${PID}" 2>/dev/null || true
+          rm -f "''${PIDFILE}"
+          echo "==> VM stopped."
+        else
+          ${pkgs.libvirt}/bin/virsh destroy "''${VM_NAME}" 2>/dev/null || true
+          echo "==> VM destroyed."
+        fi
+      }
+
+      ssh_vm() {
+        exec ssh -p "''${VM_PORT}" -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null "testrunner@localhost" "$@"
+      }
+
+      # Main dispatch
+      case "''${1:-help}" in
+        build)   build_vm ;;
+        start)   start_vm ;;
+        stop)    stop_vm ;;
+        destroy) stop_vm; rm -f "''${VM_IMAGE}"; echo "==> VM deleted." ;;
+        ssh)     shift; ssh_vm "$@" ;;
+        *)
+          echo "Usage: pr-test-vm {build|start|stop|destroy|ssh}"
+          echo ""
+          echo "  build    — build the NixOS VM derivation"
+          echo "  start    — boot the VM (create image if needed)"
+          echo "  stop     — graceful VM shutdown"
+          echo "  destroy  — stop + delete VM image"
+          echo "  ssh      — SSH into the running VM"
+          ;;
+      esac
+    '') ];
+  };
+}

modules/nixos/services/wireguard-client.nix

@@ -0,0 +1,54 @@
+{ config, lib, pkgs, ... }:
+
+with lib;
+
+let
+  cfg = config.gortium.wireguard-client;
+in
+{
+  ##### Options #####
+  options.gortium.wireguard-client = {
+    enable = mkEnableOption "WireGuard VPN client to lazyworkhorse VPN server";
+
+    vpnIp = mkOption {
+      type = types.str;
+      description = "Assigned VPN IP with CIDR, e.g. \"10.8.0.4/24\"";
+      example = "10.8.0.4/24";
+    };
+
+    privateKeyFile = mkOption {
+      type = types.path;
+      description = "Path to the WireGuard private key (age-encrypted, via agenix)";
+    };
+
+    presharedKeyFile = mkOption {
+      type = types.nullOr types.path;
+      default = null;
+      description = "Path to the WireGuard preshared key (optional, age-encrypted)";
+    };
+  };
+
+  ##### Config #####
+  config = mkIf cfg.enable {
+    networking.wireguard.interfaces = {
+      wg0 = {
+        ips = [ cfg.vpnIp ];
+        privateKeyFile = cfg.privateKeyFile;
+
+        peers = [
+          {
+            # Server public key (lazyworkhorse wg-easy)
+            publicKey = "rY9zII3AOm8rog2rv02PyA3Bq7zdvTOGkZapfCV1DkE=";
+            presharedKeyFile = cfg.presharedKeyFile;
+            # Split-tunnel: only route the VPN subnet
+            allowedIPs = [ "10.8.0.0/24" ];
+            endpoint = "vpn.lazyworkhorse.net:51820";
+            persistentKeepalive = 25;
+          }
+        ];
+      };
+    };
+
+    environment.systemPackages = with pkgs; [ wireguard-tools ];
+  };
+}

patches/0008-panel-cwu50-fix-init-seq1.patch

@@ -0,0 +1,19 @@
+--- a/drivers/gpu/drm/panel/panel-cwu50.c
++++ b/drivers/gpu/drm/panel/panel-cwu50.c
+@@ -58,5 +58,8 @@
+ 	dcs_write_seq(0x72,0x06);
+ 	dcs_write_seq(0x75,0x03);
++	/* DSI_INIT0: set 4 lanes (bits[1:0]=11) */
++	dcs_write_seq(0x80,0x03);
+ 	dcs_write_seq(0xE0,0x01);
++
+ 	dcs_write_seq(0x00,0x00);
+ 	dcs_write_seq(0x01,0x47);//VCOM0x47
+@@ -721,6 +723,6 @@
+ 	dsi->lanes = 4;
+ 	dsi->format = MIPI_DSI_FMT_RGB888;
+-	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
++	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
+ 
+ 	ctx->id_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_IN);
+ 	if (IS_ERR(ctx->id_gpio)) {

result

@@ -0,0 +1 @@
+/nix/store/z86r4awsbrc5q9qhwwi757wxixcqgn31-nixos-system-uConsole-25.11.20260608.e820eb4

result-uconsole

@@ -0,0 +1 @@
+/nix/store/7y7rfksqcf5smz59jjixyl56bxq50j9g-nixos-system-uConsole-25.11.20260608.e820eb4

secrets/containers.env.age

@@ -1,34 +1,36 @@
 -----BEGIN AGE ENCRYPTED FILE-----
-YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IHNzaC1lZDI1NTE5IEdoTUQ4QSBOL29w
-eGk1N2xxTHJtaUEvWWZmbkh1bk11Tjk3anNnMDB1cCtPYUMzdTNJCkdhQ08vblNG
-UlV1K2xVTGZVTzFWYXAzcjZaMWs0RTFWdStKSmlSTURvK1EKLT4gLC1zKU8zVkgt
-Z3JlYXNlIFUiXFcpS302IHByVn5jOy0gRDMKQjV3SHpDWUIybGFyQUg3ZlR0R2hV
-eWM3SFlCVW5mdlpBVUF3a0xpNlZCeGNUd1oxTTlkc1RkTXdZS0lFTmN3Ci0tLSA3
-VlBqM1VLWllZc0JnOTMvUFRjMU13OTdzMmhsdGJubkk5eGpERVVLYUk4Cnzh5UbU
-FlgqpM8jkJ6XlsaIDCw/G3D6uJ/GRJW4gIekuhAUxpZJrc8eOA8ZuHfGrBbH3acV
-tVafX5F0Kr2oOblqZ6gduZOUS52KmWH8stiBJM+e5ZZ7zRQVE4PJUKUPCzi+WdcH
-zr295T//FOdicrYHdsjfziKEHzBtUCFiATW05+O2zMjYjO6cPzePcCzPWinwiID6
-V+f6ngfkkQaj3wBGkzaieQJzRcdSwky21aVhGCCX/bvqx61iW2d5QAKxGbtQ2RcG
-X1okr+xunAM94nzDMv46vyN97KxY7cZd4pAaOxoICc2Tfhtw6F+iS6QkQh1odJzO
-7ZH+sSQCvndG+8z9shXGiHalASF5tdguM+JlEvAGljcaiAUtsQWxr9CoWiEkC6c6
-NCaECSYO8Il+SXBQnSZSGJSNDhuPYCYrsjXGSAONFixuyeslAkq9x2WUaUS4H063
-1QvRF7XO2tBPtgCLsSjdiGp0h+ImUaGdu6fDR7zrDsGsaAFCSFeH/rGNNXRQ2vP2
-CSfPfDDCqpUSCn0WuA30BtaPLxGmZT6OjFevKzYMNDmdeq9ia/q8K0hmjLUBdN3k
-tdYWbwoaf4gYbUWxSleD768b0Jgxss9Vod+sFQ+NYRksdGIeyND+aQIc312XehfA
-qHFBS8nlj7eUF5bdvCYQ64z741mH4cNlGxyjPBH1x8FHnEOocJXYt1l2AZSRJmJA
-c3z0QGXyuCbsrLBXWK1EKa/Juo4PGGsEVoLRhwJAQy9+i1JN0yrfRvSPyzvD4px6
-wRPzlZ80MQdb2lv84WS/zcOEZmZzlLntszTRRdIfAsuaavP2Rquh4rEXABYeTZwp
-5dem79s8bdW2nFsGMNz1OQKQwocyjYu1jJMHu6Gp7Ngdl1xyW7xfg0dezE1c0cIh
-xt1aLER9YJp4n5to5cOH16l3mjDHnAvABx38xE9loNL3399J/evw7LxpTYQ4v2Xv
-x8xnDHcqJ+deFSwyuUnMS5DkUeYuHmUl0Q2WYcfY+ibCmcgCb2ObTtuN1/ZxNYrL
-OKrnmfuSvBgyuIOj5e6uWW0+Zs8dHKXu2TgV8WignxOhl5zQgCpCBlqVfO0t+NCu
-Gi26hU/fhGWQ/1oQa3VkpGsypZbJpgQvfWxfcGHP/MMhnl01zzlP8/aexSY3pAxf
-fz9v0IVh6xxtu3zbiiVzUsXbfG7t+xY98jMphf4AS2mWva3GWVmhhu0lS3J3P+go
-YEEP4rOFHeU0Y1/6kLydTXvz4jMH0H92XQIzshd7vzQnEJPUPAzqRmw3LKYGgCI+
-wZEnxJ6ckqTkGBFnxTpy9LLllwmnz2Ky87nY3XAmqxlhb2Ap1XFAlfgszmGjc+Il
-KkIgoWQHTUm6QM9ta++oUTIDneOvxGd0zZsqoEhiC/7E01BNNZ6E58TeJU3fDlA3
-mX6n05XjwPRpgXZfayPoAgBlZc2H4KeiynxwNZ/dWu7qz7L6Ppk6Nvtly8giTbFx
-CA+tto7vq+D+CAEJ4bgyq4BCH4GL4APrhPcWp98Mko1WCiRTIKgkZxQCYvlg/LZq
-LNhMacP9T1qTvNC+yR1NEMiegE3APzk6CkDpVaO9+5f/sqifNPINCMothenI9ePw
-zjQLI3Mo1m73bkomytUZ7i1VstP5sEZ5LF72Sq7BpR3oQ3Gp0CAN9w==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 -----END AGE ENCRYPTED FILE-----

secrets/gortium_password.age

@@ -0,0 +1,10 @@
+-----BEGIN AGE ENCRYPTED FILE-----
+YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IHNzaC1lZDI1NTE5IEdoTUQ4QSA4MlFz
+SHFjYjJMVHRlTWNGVGI2bHQxc0xRd2tlaExlM0NFMWhlbkR2bVg0CkxxenVTaXkr
+eWxybDdCeUM0ejRvZWI4cFZCWm5VczRvZkNnT0d5Y1oyYmsKLT4gK1NmRzVtLWdy
+ZWFzZSB3UDI6TyNaCnF4Ylk0QWduaXZxRFBFbDBOZ0dxeGxiWTVCYjRtZTJBRkFC
+YU5qaytYWWI4OWl1K1FSdXNlY2JXZjkzak9tTHkKVFlCRlRqY1FVSzFmNS9yZmxF
+aEUxelUwNEpKN3VXYi9KUWN4bXFscm5oUEFOajhRZDlERWVYcFgvQQotLS0gK1JI
+VERTQjB6d1k3NDQwbjNveXBqcFk1WE96cHlaTTVkTWRMZENPamFJZwpcT1CP/KvU
+CsunvfX9RBlSSKuw4eem9N9s3JqJNj4FRQizNx6QzlE1vSME
+-----END AGE ENCRYPTED FILE-----

secrets/home_wifi.age

@@ -0,0 +1,10 @@
+-----BEGIN AGE ENCRYPTED FILE-----
+YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IHNzaC1lZDI1NTE5IEdoTUQ4QSAycE1Y
+YmMvUWZpK2VKQVlqaHFtaERBRGROcFIyL0d6dEVRQmFxLzlqdFZNCkYxWkNIUXRZ
+V0dQOG4zY3U3Nk1JelBtY0cwUGdxaEI3dmZaVTZId04rVTQKLT4geV1cZC4wMnst
+Z3JlYXNlIDYgOG1IME1xCkQ0RGN1NU1FUWk0Y1RmamNEY0tJWmFQNGdoMkROcGVy
+aU5UYVFobVRLMVVUQ1JicUM2c0tSVzRQdEZ0VE5YamQKZUxPeVpLWDZJR0hqemdD
+cmkyUUdFZEZKZjBDNGhmNFR6bVUKLS0tIDRQUGR5RGI5UEhGNk5EQWw4dFk0R01k
+TUJWOFpleXBUajFPckFmem52cGsKHzn+QnuYLI2NEh5WWZQHrNuvVzYk+kVjsAsn
+KNS2dHjvadAopVY2Gypldf1p2RRtmgZkDHaPlNzv5Hk=
+-----END AGE ENCRYPTED FILE-----

secrets/secrets.nix

@@ -8,6 +8,8 @@ let
 in
 {
   "containers.env.age".publicKeys = authorizedKeys;
+  "gortium_password.age".publicKeys = authorizedKeys;
+  "home_wifi.age".publicKeys = authorizedKeys;
   "lazyworkhorse_host_ssh_key.age".publicKeys = authorizedKeys;
   "n8n_ssh_key.age".publicKeys = authorizedKeys;
   "openclaw_gateway_token.age".publicKeys = authorizedKeys;

secrets/wireguard_preshared_key.age

@@ -0,0 +1,9 @@
+-----BEGIN AGE ENCRYPTED FILE-----
+YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IHNzaC1lZDI1NTE5IEdoTUQ4QSA3VG9Z
+MVFPVFc2VVJ3d0h0dmtBUnI3WHl2SzUxTkRZbjFCaGloWmV3dnd3ClcxdnVPeGd6
+SU4zR0Q0K1dtVjRRVHd0VW5XSFI0dVFpTjZnYk1DNjRxTVEKLT4gQzlgRy1ncmVh
+c2UKeUozOWgyUytSTVF0NjY2STBEb2VadwotLS0gblI3bmJCUWxxU3QrYTEyVFBI
+Snc4NC9rTkh0NnZYbUtxUE9hRWRkelpmMAq58fmH6cK13GeD7wGLxKmx10hmJeW4
+b7KqnCD1ZP7uG85s32xzVRwRG8RrG4xZo5nR9Mrtg1CoTSFfUGeFnf5xveN+Ej0X
+wDVB1LwC+Q==
+-----END AGE ENCRYPTED FILE-----

secrets/wireguard_private_key.age

@@ -0,0 +1,11 @@
+-----BEGIN AGE ENCRYPTED FILE-----
+YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IHNzaC1lZDI1NTE5IEdoTUQ4QSA5dzVG
+WUNvT3NlRmcrWS81bzJqSWlTekVYaDFFTE10SkI2dEgzaGpxcUI4Cmk5Y0FGYTRZ
+K0NGYzY3VUp4aS9ZZGRmWTgybDJFUURva2pZNmVOS3QxdEUKLT4gPnVRTCtldGMt
+Z3JlYXNlCk04OTJZeFRNeDI5aGpMVTk1ZTE0Y2FMMnFEMjlJalJpMHRlaTE4ZWIx
+d2lCRGQ5RHVjcktOMGJCb1VERlNWcTYKaSt0L1Z6dVJ0QWIyZkhsYzFEVjZSQWUr
+ZWpwVlo1TmhoUFJZdkEvR0gxNlVhcXF2ZTRnCi0tLSBLcmM2MThNVkdWclpHUXRr
+VTF6QVk2WUZlTXpZMVNLMlpBOFc3M1o5WjZzCs9xbPlIX+u5vRSQ/z9utu+I9S2c
+02DOsIb1kzxzb1OK91b8Kh4JucQSq3qkyEvRucsNn5QW8hIHDnRuND6EbPyN7p4S
+YB/F0dxSqgnq
+-----END AGE ENCRYPTED FILE-----

users/ai-worker.nix

@@ -1,14 +0,0 @@
-{ pkgs, inputs, config, keys, ... }: {
-  users.users.ai-worker = {
-    isSystemUser = true;
-    group = "ai-worker";
-    home = "/home/ai-worker";
-    createHome = true;
-    extraGroups = [ "docker" ];
-    shell = pkgs.bashInteractive;
-    openssh.authorizedKeys.keys = [
-      keys.users.ai-worker.main
-    ];
-  };
-  users.groups.ai-worker = {};
-}

users/ai-worker/ai-worker.nix

@@ -0,0 +1,92 @@
+{ pkgs, inputs, config, keys, ... }: {
+  users.users.ai-worker = {
+    isSystemUser = true;
+    group = "ai-worker";
+    home = "/home/ai-worker";
+    createHome = true;
+    extraGroups = [ "docker" ];
+    shell = pkgs.bashInteractive;
+    openssh.authorizedKeys.keys = [
+      keys.users.ai-worker.main
+    ];
+    # No password login - SSH key only
+    hashedPassword = "!";
+  };
+  users.groups.ai-worker = {};
+
+  # Enable restricted AI worker SSH access for ollama benchmarking
+  # SECURITY: ai-worker can only:
+  #   - SSH into host from Hermes container
+  #   - Run docker commands (docker exec ollama ...) via docker group
+  #   - Run specific security audit commands
+  #   - NO access to infra repo (no bind mount)
+  #   - NO sudo access (no nh, nixos-rebuild, nixpkgs-fmt, nix)
+  # WORKFLOW: SSH from Hermes container, run docker benchmarks, return and save results to /opt/data/ai-optimizer/
+  
+  # Restricted sudo for ai-worker - security checks only
+  security.sudo.extraRules = [
+    {
+      users = [ "ai-worker" ];
+      commands = [
+        # Firewall checks
+        {
+          command = "/run/wrappers/bin/sudo iptables -L -n -v";
+          options = [ "NOPASSWD" ];
+        }
+        {
+          command = "/run/wrappers/bin/sudo iptables -S";
+          options = [ "NOPASSWD" ];
+        }
+        # Fail2ban status
+        {
+          command = "/run/current-system/sw/bin/fail2ban-client status";
+          options = [ "NOPASSWD" ];
+        }
+        {
+          command = "/run/current-system/sw/bin/fail2ban-client status *";
+          options = [ "NOPASSWD" ];
+        }
+        {
+          command = "/run/current-system/sw/bin/fail2ban-client get * banned";
+          options = [ "NOPASSWD" ];
+        }
+        # Log inspection
+        {
+          command = "/run/current-system/sw/bin/journalctl -t kernel -n 100";
+          options = [ "NOPASSWD" ];
+        }
+        {
+          command = "/run/current-system/sw/bin/journalctl -u fail2ban -n 50";
+          options = [ "NOPASSWD" ];
+        }
+        {
+          command = "/run/current-system/sw/bin/journalctl -u firewall -n 50";
+          options = [ "NOPASSWD" ];
+        }
+        # SSH config verification
+        {
+          command = "/run/current-system/sw/bin/sshd -T";
+          options = [ "NOPASSWD" ];
+        }
+        # Docker service checks
+        {
+          command = "/run/current-system/sw/bin/docker ps";
+          options = [ "NOPASSWD" ];
+        }
+        {
+          command = "/run/current-system/sw/bin/docker inspect *";
+          options = [ "NOPASSWD" ];
+        }
+        # Network diagnostics
+        {
+          command = "/run/current-system/sw/bin/ss -tlnp";
+          options = [ "NOPASSWD" ];
+        }
+        {
+          command = "/run/current-system/sw/bin/cat /proc/net/tcp";
+          options = [ "NOPASSWD" ];
+        }
+      ];
+    }
+  ];
+}

users/gortium/gortium.nix

@@ -1,4 +1,6 @@
 { pkgs, inputs, config, keys, ... }: {
+  home-manager.extraSpecialArgs = { inherit (config.networking) hostName; dotfiles = ../../assets/dotfiles; };
+  home-manager.users.gortium = import ./home.nix;
   users.users.gortium = {
     isNormalUser = true;
     extraGroups = [ "wheel" "docker" "video" "render"];
@@ -6,9 +8,10 @@
     packages = with pkgs; [
       tree
       btop
-      nh
     ];
     shell = pkgs.zsh;
+    passwordFile = config.age.secrets.gortium_password.path;
+    ignoreShellProgramCheck = true;
     openssh.authorizedKeys.keys = [
       keys.users.gortium.main
     ];

users/gortium/home.nix

@@ -0,0 +1,65 @@
+{ pkgs, lib, config, inputs, hostName, ... }:
+
+let
+  dotfiles = ../../assets/dotfiles;
+  isUconsole = hostName == "uConsole";
+in {
+  home.username = "gortium";
+  home.homeDirectory = "/home/gortium";
+  home.stateVersion = "23.11";
+  programs.home-manager.enable = true;
+
+  home.file = {
+    # tmux
+    ".tmux.conf".source = "${dotfiles}/tmux/.tmux.conf";
+
+    # kitty
+    ".config/kitty/kitty.conf".source = "${dotfiles}/kitty/.config/kitty/kitty.conf";
+
+    # nvim
+    ".config/nvim/init.lua".source = "${dotfiles}/nvim/.config/nvim/init.lua";
+
+    # starship
+    ".config/starship.toml".source = "${dotfiles}/starship/.config/starship.toml";
+
+    # btop
+    ".config/btop/btop.conf".source = "${dotfiles}/btop/.config/btop/btop.conf";
+
+    # waybar
+    ".config/waybar/style.css".source = "${dotfiles}/waybar/.config/waybar/style.css";
+    ".config/waybar/config.jsonc".source = "${dotfiles}/waybar/.config/waybar/config.jsonc";
+
+    # wofi
+    ".config/wofi/style.css".source = "${dotfiles}/wofi/.config/wofi/style.css";
+    ".config/wofi/config".source = "${dotfiles}/wofi/.config/wofi/config";
+
+    # yazi
+    ".config/yazi/yazi.toml".source = "${dotfiles}/yazi/.config/yazi/yazi.toml";
+
+    # hyprland — common config
+    ".config/hypr/hyprland.conf".source = "${dotfiles}/hypr/.config/hypr/hyprland.conf";
+    ".config/hypr/hypridle.conf".source = "${dotfiles}/hypr/.config/hypr/hypridle.conf";
+    ".config/hypr/hyprlock.conf".source = "${dotfiles}/hypr/.config/hypr/hyprlock.conf";
+    ".config/hypr/hyprpaper.conf".source = "${dotfiles}/hypr/.config/hypr/hyprpaper.conf";
+    ".config/hypr/mocha.conf".source = "${dotfiles}/hypr/.config/hypr/mocha.conf";
+
+    # hyprland — host-specific monitor config
+    ".config/hypr/host/monitors.conf".source =
+      if isUconsole
+      then "${dotfiles}/hypr/.config/hypr/hosts/uconsole.conf"
+      else "${dotfiles}/hypr/.config/hypr/hosts/laptop.conf";
+  };
+
+  home.packages = with pkgs; [
+    git zsh tmux starship
+    neovim kitty
+    btop yazi ripgrep fd fzf
+  ] ++ lib.optionals (!isUconsole) [
+    waybar wofi swww hyprshot
+  ] ++ lib.optionals isUconsole [
+    brightnessctl
+  ];
+
+  programs.zsh.enable = true;
+  programs.starship.enable = true;
+}