Empty initrd for display, add rp1_dsi module

ALL RP1 hardware (gpio, clocks, dsi) sits behind the RP1 PCIe
southbridge, which isn't ready until ~12s. Loading any display
module in initrd (~3s) crashes the system. Nothing in initrd now:
- boot.initrd.kernelModules: empty (nothing touches RP1 early)
- boot.kernelModules: vc4, panel_cwu50, rp1_dsi (stage-2)

.gitea/workflows/build-nixos.yml

@@ -1,33 +0,0 @@
-name: Build NixOS config
-on:
-  pull_request:
-    branches: [ master ]
-    paths:
-      - '**.nix'
-      - 'flake.lock'
-      - 'secrets/**'
-      - 'hosts/**'
-      - 'modules/**'
-  push:
-    branches: [ master ]
-    paths:
-      - '**.nix'
-      - 'flake.lock'
-      - 'secrets/**'
-      - 'hosts/**'
-      - 'modules/**'
-
-jobs:
-  build:
-    runs-on: nixos-builder
-    steps:
-      - name: Checkout
-        run: |
-          git clone -b "${{ github.head_ref || github.ref_name }}" \
-            https://gitea:${{ secrets.GITHUB_TOKEN }}@code.lazyworkhorse.net/gortium/infra.git .
-          git log --oneline -3
-
-      - name: Build NixOS config (lazyworkhorse)
-        run: |
-          nix --version
-          nh os build .#lazyworkhorse 2>&1

flake.nix

@@ -2,20 +2,34 @@
   description = "Gortium infra flake";
 
   inputs = {
-    nixpkgs.url = "github:nixos/nixpkgs?ref=nixos-unstable";
+    nixpkgs.url = "github:nixos/nixpkgs?ref=25.11";
     agenix = {
       url = "github:ryantm/agenix";
       inputs.darwin.follows = "";
       inputs.nixpkgs.follows = "nixpkgs";
     };
+    disko = {
+      url = "github:nix-community/disko";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
     lix = {
       url = "git+https://git.lix.systems/lix-project/lix?ref=main";
       inputs.nixpkgs.follows = "nixpkgs";
     };
-    self.submodules = true;
+    nixpkgs-uconsole = {
+      url = "github:nixos/nixpkgs/54170c54449ea4d6725efd30d719c5e505f1c10e";
+    };
+    nixos-uconsole = {
+      url = "github:nixos-uconsole/nixos-uconsole/v1.1.0";
+      inputs.nixpkgs.follows = "nixpkgs-uconsole";
+    };
+    nixos-raspberrypi = {
+      url = "github:nvmd/nixos-raspberrypi/v1.20260317.0";
+      inputs.nixpkgs.follows = "nixos-uconsole/nixpkgs";
+    };
   };
 
-  outputs = { self, nixpkgs, agenix, lix, ... }@inputs:
+  outputs = { self, nixpkgs, agenix, disko, lix, nixos-uconsole, nixos-raspberrypi, ... }@inputs:
     let
       system = "x86_64-linux";
       keys = import ./lib/keys.nix;
@@ -26,7 +40,7 @@
           "/etc/ssh/ssh_host_ed25519_key"
           "/root/.age/bootstrap.key" ];
       };
-      overlays = [ agenix.overlays.default ];
+      overlays = [ agenix.overlays.default (import ./overlays/reticulum.nix) ];
       pkgs = import nixpkgs {
         inherit system overlays;
         config.allowUnfree = true;
@@ -80,6 +94,24 @@
               ./hosts/cyt-pi/hardware-configuration.nix
             ];
           };
+
+          uConsole = nixos-uconsole.lib.mkUConsoleSystem {
+            variant = "cm5";
+            specialArgs = { inherit self keys paths inputs nixos-raspberrypi; };
+            modules = [
+              {
+                nixpkgs.overlays = overlays;
+                nixpkgs.config.allowUnfree = true;
+                nixpkgs.config.permittedInsecurePackages = [
+                  "openclaw-2026.3.12"
+                ];
+              }
+              disko.nixosModules.disko
+              ./hosts/uConsole/configuration.nix
+              ./hosts/uConsole/hardware-configuration.nix
+              ./hosts/uConsole/disko-config.nix
+            ];
+          };
         };
         devShells.${system}.default = devShell;
       };

hosts/lazyworkhorse/configuration.nix

@@ -11,6 +11,10 @@
   # Flakesss
   nix.settings.experimental-features = [ "nix-command" "flakes" "flake-self-attrs" ];
   nix.settings.trusted-users = [ "root" "gortium" ];
+  nix.settings.extra-platforms = [ "aarch64-linux" ];
+
+  # QEMU binfmt for cross-building aarch64 NixOS targets
+  boot.binfmt.emulatedSystems = [ "aarch64-linux" ];
 
   # Garbage collection
   nix.gc = {
@@ -207,6 +211,7 @@
     ai = {
       path = self + "/assets/compose/ai";
       envFile = config.age.secrets.containers_env.path;
+      ports = [ 22000 ];  # Syncthing TCP sync
     };
 
     cloudstorage = {
@@ -474,7 +479,7 @@
   services.openssh.settings = {
     PermitRootLogin = "no";
     MaxAuthTries = 3;
-    MaxSessions = 10;
+    MaxSessions = 20;
     LoginGraceTime = 30;
     ClientAliveInterval = 300;
     ClientAliveCountMax = 2;

hosts/uConsole/configuration.nix

@@ -0,0 +1,286 @@
+{ config, lib, pkgs, paths, self, keys, ... }:
+
+let
+  # Backlight fallback for CM5 display quirk
+  # The kernel driver usually handles this, but some boots need a kick
+  backlightFixScript = pkgs.writeShellScript "backlight-fix" ''
+    # Try sysfs backlight control
+    for bl in /sys/class/backlight/*/brightness; do
+      if [ -f "$bl" ]; then
+        max=$(cat "$(dirname "$bl")/max_brightness" 2>/dev/null || echo 100)
+        echo "$max" > "$bl" 2>/dev/null || true
+      fi
+    done
+  '';
+in
+
+{
+  # Basic Host Info
+  networking.hostName = "uConsole";
+  time.timeZone = "America/Montreal";
+  i18n.defaultLocale = "en_CA.UTF-8";
+
+  # System State
+  system.stateVersion = "25.11";
+
+  # Boot & Hardware (migrated to kernel bootloader per nixos-raspberrypi deprecation notice)
+  boot.loader.raspberry-pi.bootloader = "kernel";
+  # kernel managed by nixos-raspberrypi module — don't override, patches are version-specific
+  # boot.kernelPackages = pkgs.linuxPackages_latest;
+
+  # Kernel parameters matching nixos-uconsole CM5 module
+  # console=tty1 is critical — without it, console output goes to ttyAMA0 not fb0
+  boot.kernelParams = [
+    "8250.nr_uarts=1"
+    "console=tty1"
+  ];
+
+  # Enable Mesa GPU drivers — REQUIRED for VC4 display pipeline to initialize
+  hardware.graphics.enable = true;
+
+  # Console font sized for the 5" 720x1280 display (from nixos-uconsole base module)
+  console = {
+    earlySetup = true;
+    font = "ter-v24n";
+    packages = with pkgs; [ terminus_font ];
+  };
+
+  # Networking
+  networking.networkmanager.enable = true;
+  services.openssh = {
+    enable = true;
+    # TODO: lock down after first deployment
+    settings.PermitRootLogin = lib.mkForce "yes";
+    settings.PasswordAuthentication = lib.mkForce true;
+  };
+
+  # User
+  users.users.gortium = {
+    isNormalUser = true;
+    extraGroups = [ "wheel" "networkmanager" "video" "dialout" "kismet" ];
+    openssh.authorizedKeys.keys = [
+      keys.users.gortium.main
+      keys.users.gortium.gitea
+    ];
+  };
+  security.sudo.extraRules = [
+    {
+      users = [ "gortium" ];
+      commands = [
+        {
+          command = "ALL";
+          options = [ "NOPASSWD" ];
+        }
+      ];
+    }
+  ];
+
+  # ============================================================
+  # Package groups
+  # ============================================================
+
+  environment.systemPackages = with pkgs; [
+    # ===== Base =====
+    emacs-pgtk
+    git
+    ripgrep
+    fd
+    htop
+    tmux
+    neovim
+    libgpiod                    # GPIO control (for internal USB hub, AIO modules)
+
+    # ===== HAM Radio =====
+    js8call
+    wsjtx
+    fldigi
+    pat                        # Winlink client
+    direwolf                   # AX.25 packet modem
+    chirp                      # Radio programming tool
+    hamlib                     # Ham radio control libraries
+    trustedqsl                 # Logbook of the World (LoTW)
+
+    # ===== SDR / RF =====
+    sdrpp                      # SDR++ spectrum analyzer
+    gqrx                       # SDR receiver GUI
+    rtl-sdr                    # RTL-SDR drivers & utilities
+    inspectrum                # Offline signal analysis
+    soapysdr-with-plugins      # SoapySDR + hardware support plugins
+
+    # ===== Mesh / LoRa =====
+    # meshtastic not available in nixpkgs 25.11 stable; install manually:
+    # nix shell nixpkgs#meshtastic -c meshtastic
+    reticulumStack             # Reticulum Network Stack (rnsd, rnsh, rncp, rnx, rnpath, etc.)
+    lxmf                       # LXMF messaging protocol
+    nomadnet                   # Nomad Network client
+
+    # ===== Security =====
+    nmap
+    aircrack-ng
+    kismet                     # Wi-Fi monitor / IDS
+    bettercap                  # MITM/network attack framework
+    wireshark                  # Packet analyzer
+    hashcat                    # GPU password cracker
+    john                       # John the Ripper
+    sqlmap                     # SQL injection tool
+
+    # ===== GPS / Maps =====
+    foxtrotgps
+    viking                     # GPS map editor
+    gpsbabel                   # GPS data conversion
+  ];
+
+  # Packages noted but not in unstable nixpkgs:
+  #   - metasploit: unfree; install manually via Git clone
+  #   - burpsuite: unfree Java app (Community Edition available for download)
+  #   - sidechannel: not a distinct PyPI package; functionality covered by
+  #     the Reticulum stack. For LXMF GUI client, install Sideband manually
+  #     from github.com/markqvist/Sideband
+
+  # ============================================================
+  # Reticulum Service (rnsd)
+  # ============================================================
+  systemd.services.rnsd = {
+    description = "Reticulum Network Stack Daemon";
+    wants = [ "network-online.target" ];
+    after = [ "network-online.target" ];
+    wantedBy = [ "multi-user.target" ];
+    serviceConfig = {
+      User = "gortium";
+      Group = "gortium";
+      ExecStart = "${pkgs.reticulumStack}/bin/rnsd";
+      Restart = "always";
+      RestartSec = "10s";
+      LimitNOFILE = 65536;
+    };
+  };
+
+  # ============================================================
+  # Kismet Service (Wi-Fi monitoring / mesh node)
+  # ============================================================
+  systemd.services.kismet = {
+    description = "Kismet Wi-Fi Monitor & IDS";
+    wants = [ "network-online.target" ];
+    after = [ "network-online.target" ];
+    wantedBy = [ "multi-user.target" ];
+    serviceConfig = {
+      User = "gortium";
+      Group = "kismet";
+      ExecStart = "${pkgs.kismet}/bin/kismet -c wlan0 --log-base=/home/gortium/kismet_logs --no-nc-ui";
+      Restart = "always";
+      RestartSec = "10s";
+    };
+  };
+
+  # ============================================================
+  # Kernel modules for SDR, radio, and WiFi
+  # ============================================================
+  boot.kernelModules = [
+    "mt7921u"         # MediaTek MT7921 USB WiFi (uConsole AC1200)
+    "88x2bu"          # Realtek 8812/8821BU USB WiFi (common adapter)
+    "rtl8xxxu"        # RTL8188/8192/8723 USB WiFi
+    "rtl2832_sdr"     # RTL-SDR kernel module
+    "dvb_usb_rtl28xxu" # RTL-SDR DVB-T
+    # Display drivers — loaded AFTER RP1 PCIe southbridge init (~12s)
+    # NOTHING in initrd — ALL RP1 hardware is behind PCIe
+    "panel_cwu50"     # uConsole DSI panel driver
+    "vc4"             # VideoCore 4 KMS GPU driver
+    "rp1_dsi"         # RP1 DSI bridge driver
+  ];
+
+  boot.blacklistedKernelModules = [ ];
+
+  # Rien dans initrd pour le display — tout RP1 est derrière PCIe
+  boot.initrd.kernelModules = lib.mkForce [ ];
+
+  # ============================================================
+  # Extra udev rules for SDR and HAM radio devices
+  # ============================================================
+  services.udev.packages = with pkgs; [ rtl-sdr ];
+
+
+
+  # ============================================================
+  # Enable IPv6 for Reticulum mesh
+  # ============================================================
+  networking.enableIPv6 = true;
+
+  # ============================================================
+  # Firewall: open ports for Reticulum (optional)
+  # ============================================================
+  networking.firewall.allowedTCPPorts = [ 22 ]; # SSH only
+  networking.firewall.allowedUDPPorts = [ ];
+  # Reticulum uses its own encryption and doesn't need open ports
+  # for basic mesh operations (peer-to-peer discovery).
+  # For TCP interfaces, open additional ports as needed.
+
+  # ============================================================
+  # Hyprland Wayland compositor (manual start)
+  # No SDDM — boot to console, user starts Hyprland with command
+  # Display modules (vc4/panel_cwu50) load late after RP1 PCIe init
+  # ============================================================
+  programs.hyprland = {
+    enable = true;
+    xwayland.enable = true;
+  };
+  # SDDM disabled — was blocking boot when display isn't ready
+  # services.displayManager.sddm = {
+  #   enable = true;
+  #   wayland.enable = true;
+  # };
+
+  # ============================================================
+  # CM5 Config.txt Fix: use [pi5] section (not [cm5])
+  # Rex's images use [pi5], the CM5 firmware may not detect [cm5]
+  # ============================================================
+  # Merge nixos-uconsole GPIO config with our [pi5] overrides
+  # GPIO 10/11 are from nixos-uconsole configtxt.nix (audio amplifier)
+  # [pi5] section fixes the CM5 detection issue — firmware matches [pi5] not [cm5]
+  hardware.raspberry-pi.extra-config = ''
+    [all]
+    gpio=10=ip,np
+    gpio=11=op,dh
+
+    [pi5]
+    dtparam=pciex1=off
+    dtoverlay=clockworkpi-uconsole-cm5
+    dtoverlay=dwc2,dr_mode=host
+    dtoverlay=vc4-kms-v3d-pi5,cma-384
+    dtparam=nohdmi1=off
+  '';
+
+  # ============================================================
+  # CM5 Display Backlight Fix
+  # The kernel driver initializes backlight, but some boots fail.
+  # This service kicks it after boot as a reliable fallback.
+  # ============================================================
+  systemd.services.cm5-backlight-fix = {
+    description = "CM5 Display Backlight Fix";
+    after = [ "multi-user.target" ];
+    wantedBy = [ "multi-user.target" ];
+    serviceConfig = {
+      Type = "oneshot";
+      ExecStart = "${backlightFixScript}";
+    };
+  };
+
+  # ============================================================
+  # Internal USB Hub Enable (GPIO 23) — DISABLED
+  # This service freeze the CM5 because gpioset 0 23=1 writes
+  # to the wrong GPIO chip (BCM2712 native, not RP1).
+  # Enable manually after boot once the correct chip is confirmed:
+  #   gpioset 0 23=1   # on chip 0 (BCM2712, CORE_VOLT or critical)
+  #   gpioset 512 23=1 # on chip 512 (RP1, likely correct)
+  # ============================================================
+  # systemd.services.enable-gpio23-usb-hub = {
+  #   description = "Enable Internal USB Hub (GPIO 23)";
+  #   before = [ "network.target" ];
+  #   wantedBy = [ "multi-user.target" ];
+  #   serviceConfig = {
+  #     Type = "oneshot";
+  #     RemainAfterExit = true;
+  #     ExecStart = "${pkgs.libgpiod}/bin/gpioset 0 23=1";
+  #     ExecStop = "${pkgs.libgpiod}/bin/gpioset 0 23=0";
+  #   };
+  # };
+}

hosts/uConsole/disko-config.nix

@@ -0,0 +1,46 @@
+{ lib, ... }:
+{
+  disko.devices.disk.main = {
+    type = "disk";
+    device = "/dev/mmcblk0";
+    content = {
+      type = "gpt";
+      partitions = {
+        boot = {
+          name = "FIRMWARE";
+          size = "1G";
+          type = "EF00";
+          content = {
+            type = "filesystem";
+            format = "vfat";
+            mountpoint = "/boot/firmware";
+            mountOptions = [
+              "fmask=0022"
+              "dmask=0022"
+            ];
+          };
+        };
+        root = {
+          name = "NIXOS_UCM5";
+          size = "30G";
+          content = {
+            type = "filesystem";
+            format = "ext4";
+            mountpoint = "/";
+            mountOptions = [ "noatime" ];
+          };
+        };
+        home = {
+          name = "NIXOS_HOME";
+          size = "100%";
+          content = {
+            type = "filesystem";
+            format = "ext4";
+            mountpoint = "/home";
+            mountOptions = [ "noatime" ];
+          };
+        };
+      };
+    };
+  };
+}

hosts/uConsole/hardware-configuration.nix

@@ -0,0 +1,39 @@
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "xhci_pci" "usbhid" "usb_storage" "sdhci_pci" "nvme" ];
+  boot.initrd.kernelModules = [ ];
+  boot.extraModulePackages = [ ];
+
+  # Filesystems for NixOS install.
+  # mkForce overrides disko's auto-generated paths so we can use
+  # filesystem labels (by-label) which work with loop device installs.
+  # Disko will set its own paths when nixos-anywhere is used.
+  fileSystems."/" = lib.mkForce {
+    device = "/dev/disk/by-label/NIXOS_UCM5";
+    fsType = "ext4";
+    options = [ "noatime" ];
+  };
+
+  fileSystems."/boot/firmware" = lib.mkForce {
+    device = "/dev/disk/by-label/FIRMWARE";
+    fsType = "vfat";
+    options = [ "fmask=0022" "dmask=0022" ];
+  };
+
+  fileSystems."/home" = lib.mkForce {
+    device = "/dev/disk/by-label/NIXOS_HOME";
+    fsType = "ext4";
+    options = [ "noatime" ];
+  };
+
+  swapDevices = [ ];
+
+  nixpkgs.hostPlatform = lib.mkDefault "aarch64-linux";
+  hardware.enableRedistributableFirmware = true;
+  powerManagement.cpuFreqGovernor = lib.mkDefault "ondemand";
+}

overlays/reticulum.nix

@@ -0,0 +1,92 @@
+final: prev: let
+  python3 = final.python3;
+  pyPkgs = python3.pkgs;
+in
+  {
+    reticulumStack = python3.pkgs.buildPythonApplication rec {
+      pname = "reticulum";
+      version = "1.2.9";
+      format = "setuptools";
+      src = pyPkgs.fetchPypi {
+        pname = "rns";
+        inherit version;
+        sha256 = "554814231c237b9caacf8df669312e57dd7d3f84b6d4810125087d1a79a75d75";
+      };
+      patchPhase = ''
+        # Fix license_files syntax: ("LICENSE") is a string not tuple
+        # Newer setuptools iterates over it char by char, fails on 'S'
+        substituteInPlace setup.py \
+          --replace-fail 'license_files = ("LICENSE")' 'license_files = ("LICENSE",)'
+      '';
+      propagatedBuildInputs = with pyPkgs; [ cryptography pyserial ];
+      doCheck = false;
+      pythonImportsCheck = [ "RNS" ];
+      meta = with final.lib; {
+        description = "Self-configuring, encrypted and resilient mesh networking stack";
+        homepage = "https://reticulum.network/";
+        license = licenses.mit;
+        platforms = platforms.linux;
+      };
+    };
+
+    lxmf = python3.pkgs.buildPythonApplication rec {
+      pname = "lxmf";
+      version = "0.9.8";
+      format = "setuptools";
+      src = pyPkgs.fetchPypi {
+        inherit pname version;
+        sha256 = "30f39f3a975a049c12ee2cfceb3261d24cb5adec881c6821f7354464b3f3650c";
+      };
+      propagatedBuildInputs = [ final.reticulumStack ];
+      doCheck = false;
+      pythonImportsCheck = [ "LXMF" ];
+      meta = with final.lib; {
+        description = "Lightweight Extensible Message Format for Reticulum";
+        homepage = "https://github.com/markqvist/lxmf";
+        license = licenses.mit;
+        platforms = platforms.linux;
+      };
+    };
+
+    nomadnet = python3.pkgs.buildPythonApplication rec {
+      pname = "nomadnet";
+      version = "1.1.1";
+      format = "setuptools";
+      src = pyPkgs.fetchPypi {
+        inherit pname version;
+        sha256 = "fa13b64a10e75b705a58024815ab72451700aa726af96d415ba99dec28dfc40a";
+      };
+      propagatedBuildInputs = with pyPkgs; [ final.reticulumStack final.lxmf urwid qrcode ];
+      doCheck = false;
+      pythonImportsCheck = [ "nomadnet" ];
+      meta = with final.lib; {
+        description = "Nomad Network — resilient mesh communications platform";
+        homepage = "https://github.com/markqvist/NomadNet";
+        license = licenses.mit;
+        platforms = platforms.linux;
+      };
+    };
+
+    rnsh = python3.pkgs.buildPythonApplication rec {
+      pname = "rnsh";
+      version = "0.1.7";
+      format = "setuptools";
+      src = pyPkgs.fetchPypi {
+        inherit pname version;
+        sha256 = "9cb72f25abb1c6d300f8014b264184ff78f592fe88e36094938012990b797c93";
+      };
+      propagatedBuildInputs = [ final.reticulumStack ];
+      doCheck = false;
+      pythonImportsCheck = [ "rnsh" ];
+      meta = with final.lib; {
+        description = "Remote shell over Reticulum";
+        homepage = "https://github.com/acehoss/rnsh";
+        license = licenses.mit;
+        platforms = platforms.linux;
+      };
+    };
+  }
+  # meshtastic may not exist in all nixpkgs versions (e.g. not in 25.11)
+  // prev.lib.optionalAttrs (prev ? meshtastic) {
+    inherit (prev) meshtastic;
+  }

secrets/containers.env.age

@@ -1,36 +1,36 @@
 -----BEGIN AGE ENCRYPTED FILE-----
-YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IHNzaC1lZDI1NTE5IEdoTUQ4QSB5c1B3
+YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IHNzaC1lZDI1NTE5IEdoTUQ4QSBWNEpt
-anRidlRvdUIxUGZWVEw0VDQ5L1QzRHdlVHJHRDRvNEF6M2dNQVNrCk50aXF6ekxq
+cGFNeVBBaDRqb3pLSEZGQW0wb3VmVnBoZCswUFkzbnBLUnJ0QTNrClRqVkk4RUVO
-WnVCUXBZbEJsVk1BMmQvN2ZpNmp3ZHYvSUlvakN2VTdZUVkKLT4gMyR8Syh7ZyMt
+d29KYjd5YUcwankvaTFmVHUxQVpDT2ZYWHRaY3JXTUtQMU0KLT4gKXBtQ3UsXi1n
-Z3JlYXNlIFs3ezgmZDAKZ2hhNzZmU2wzdkNkTnliL0NiWWlQbnppcmRLdHZVYWdm
+cmVhc2UgNnwxYCBXVyA/KCQmIHt9NAo3OTZVUHR2UXkvaEFwY0ZBdEJsaFpsbHJ0
-bG5LZ0p3Ci0tLSBMYmxYa0hCbnVham05dVo5eEJXTEhob2F1YXhzNlNoVXBwNmNz
+cklKcDVHcEdWMEdPSkpnN0FiRU43RW5hUWFMdjR3WFRRSFBLSGlmClM3cTNJWlNM
-M0RVS0xRCt2jk8SwZ4McFmBkWknNs0phZSD3deFAh1nvRE9fSp82yNG0SoFE8O8e
+TExkdHdXUHJISkNIaE1TTUxUc1NUWkV1a09HeFU3bVZwQXMKLS0tIGhOcXFTUElS
-HaMP5fO1Y7gW7Nqvvtr0Fs2AXwxzLtVRc8+XYxDuhRY9Rq5w/VHaEt9fS2OQioml
+azJJNnEreUhMWTJBaVZGSTJPRUFqQkVYS01KRENUVVpZSDgK8+8onFejroBo7MeO
-hcTw3MhBGAN4JVhFz/lUOEO82jd3lKig95fGjA2SpwfxlAMhepe7OmJ4Hpe+QrPt
+dW+so4lOsq4zJKn3f0cxmCFg1f0X8zt6h4Uc3A5Cvr1uU+6yw1FWmJ7xa3jJz3lO
-orXgJHG2Ssu2mLgpnIr3mYVXKfNMy9TUGkh5hM1qR2TidtcefExYegCesjRNmSw/
+EEaKQJXYC+xIIKGcA7qILa0SFp4a/4OuYjcg27HrlPhg7u5wDhQrd0LdVEe1Xngp
-KVe8wTdF1dr+R+vQDGXZleLpLzKZHATw36+GxGUfpm6iWuDc3lBsjHrVVlm2mz7o
+ZivX7P7HwIna3X8C+TL+K2v/AG2N/z86cdKfRvxyMKNbHhYw+CfHEnWgh8tJ++4h
-XM+bHDnnUHSFXhHh5gDIoRi/kI3w5b1F2psKXFAGOQq4osrYInoGdvMrGWDvhGZS
+G9evNniuNqte6cQaRe7jODfPNW4FuY/Sb7barlJ/M9iAQdYAdyLAzU1LABeHeUfD
-GbVyAoZKYOmlqjM/AY4vMc5N7ICsDJqugFi9fDSmckfgzvUYVbzuv7D+1gtmjAzi
+wtHjxy9DUZ55Vg8bB8M2JJU9MkoRT4ewiVd9LeC1GWeVmKsm93wsmrov714i7U2j
-+e/vhujRjE2xaD7kIeO6UFq0lZpMoQV3tX5kJG0OOuF1GlZzw22SUc67w25JNHSE
+wHtDkjqEF2MmzuQc18sjNaAHiwz8j6o5xU2L/Q4+Q707yISWG7RGZYh389Cr1rnw
-GRnm+MN7XfvtlRZyyYERMs6j829H6zOQL96YBpzxc1yx07K+SMKewHhbm4pyrcDD
+siUq/Vunqw2wk13+J/4vu9nqt5mMktBaCtp+QiWIurjwB5LUAyChrSm+dg5lb0Mt
-dVZxNMHv+B+F2tw1KFMl+Go3pyQp0p+CgiSWUoyvBzK0BwZ7XXy93GWmuAN/dhpU
+UhSc0lq1+E3vxAXM2Hmk+vP86VD+6WJvAU82VFApF1s6zG2FU1/AcOVVf54nan/q
-YhXIiqXgexN6a/0Z6OTah8xW1sr6EYvIGWnXdUUB+azEI2uykX00MO10szDJ/vkh
+f+rgSFfASHQCYSblUJHyEtwLNsWEmTGmOEn1buUKD/H0zatPQnc0rYpjlx2V0Sjd
-DZUafMtlgMKU+fBbM0Tr0QM1R30BWNJCjHgsoU7mxbyiuFYuyAC72T70z5WdQTst
+6yB5+wPrZ0AkN1pjcsPKOv8Kaog2DzqIjib+SaSTaRxWHQEb9uzvaReAcYI5HOpE
-jf4NJdc4FKOHA6ydLoyzi7ey05nxm8zquHW1kCwLVUMhvjUPbQhpWQbU8DvlB6l1
+gkC040HN33BItATbo4+hz70Im8Ni/VXD+g6yzM6Hj1hJL+PinTKeg5keQRFIZjMx
-nGqWBUTqeorstDcvTTEjySPrp7PIUMj+Vt2MiFCQa5eh2sZWFJsYrA6CEtGFTpyU
+grzievB2wVBBgLgN3qMdTFmpplaL7iL702JjXZUTTK9Izp+9wiCsV1fTa53FWDht
-og8rGtS7UBukgsp7rucLO8MYt0/ZauUcEg0jcbWc+KOWtC9MPedv6gTLfaxpk1xy
+ylFL5SWElqXjK+QBXxAe+Jk6VQov5HI21YDXL67S554ABeRok23wxrQ31TCI4xq9
-iY+7Y+H860Pt1WvVFYg9/0fj0wz92DqR08oWvOjR7+EekhacqAHfTm6PpLLKSeHw
+PQV7VtNRjyVud7S29m3OwpWOsgTZhn+JclHj2v4bNJzJkJnZRTmcvGPktzRI5+R4
-M1D0dElJ6L1hkmHr88q7YwPfMzObmRbKh28ayeoLOprx3ezYr4t0qWWAKysvkkuo
+e5vxVhGnJDzI71txaHl8+xS1lu9VzCQUrxX6TXyTRV4KjIOz0g06JOBgmBRBvJca
-uhvfqngZefj7CloVCaQVM0Du6p74wV5UEkxopJyMc3s4oEkauX2DgVHzb0NJ+a3n
+7MZbC65xpisl/gyLRbgkVga3t94dPV+dpZsn8eq6427IyRbKslJefatggR9//c6I
-KyatZoIEOK+yBDuRw9+c3FdxOmSc8EEdDPh5tXHOfixdxHlMXeNWo7VwtR7ThPcj
+5N5fl0fR3gJQMB+HRbipBH2YsdbdWJyb4Nn6STZxIfrqoG/xC6C1raF0xK7hUx6i
-wRHwN9dgzW4AbYQAHKSOCGGqlhINYVxDviwhTT+PYB/w7x42id8aMW2KOhgGcVCD
+4DUDSPohM8fOIswQPfE+FH3eygfzu/Ln5+ghsgHTEhgFvmgMvyxaAt6kHIzIUhMX
-fyQQJN5ANCxglu/T0+SmXikPQkuJqzOuE0+qqz1sMuKF3KLJB5ppys1Ygmpm27Up
+M3dASr4VPDpIXuXsRWwYLEifhzxsuvwVxfwtsnCaR6XKijsYECWGDdYOWHdleeqx
-oaqBa7JS4yJc53rPSEy4r10GqBbvYNDmcEWZilSrj5aTB7nhq+RVyTwmAU+qfLmK
+wDPhxEesfFVhKxhrKY9Ir8k9/FFBKQU/3GjW4+SMAg5Al1YEzxshP9vKuVcsei7W
-NgGi05oyVGYBX135c6eXkEtKg1HiH5LkqkvLGIDYkAeiLmqXv6N7hGphBF7fdLXw
+JDwAwotNXaCm6NBckiyZJE53ou6+gckPY7V9cOfnuH74Z9ywkFzB3HW3ZlonaGyM
-g8Anrn+JYaOc/6ZntCPLwm4cV4KE2hswSReHFrposb6M4/Kbx8Yf2iMx07IQ3v/R
+oGmLGcccavFtyhg5s/As4i6X8ARIpDiwe59Pn3GNXMctySqIrrr2ogUoXgrfFCie
-z0sIihHjfOqLi3kafL4N0BDoLAQdjbxqkx1z0VcGVkPliS0mDro17b1KfxPsI04/
+6GOTdeMW7GeOSdJUxCofghlspS/nq01Og77VI/beWYrIwLubSka6Zaltww9zgObk
-k6xTWoBQAhcCkH+NpT0VRNCM7f6aycsJekfakTRRqg5rwFimqReMSJcKCLZdoezi
+/FGEMgFkEpq7iyCvYSPA8F46pJKvnMP3S84AWCPmcTcHeg4lwGPvs6btexXBGdoz
-iAIMHPqPW1+sjwA7Rroj3Th0NbC8vGJ47vobK8jQ4XgrwaUGhhloCTpAjzFLFTUS
+nkCyq7wdH5Nngm7jUbl88LtaLZPAQkuqXphBVTnrF9Ofbnb4iRZ2Op4xpx9rGyvx
-YdiJN2qBQfABhxD9Owqo98HXDigqb9jhh/LrPYYDhtP6c4J+zz3+gPRiho7T03H3
+mO6UEhL6V1i2YZFNkNMg/W8aoMiUgBdqbkxaxblT9L0aNdlFU9+LbWYolURVEadd
-kZ+YU3Q=
+Qjv0Z1gMA+tsuBbVszwsMfneZ5+B9Q==
 -----END AGE ENCRYPTED FILE-----