feat: add WireGuard aliases (wg-up, wg-down, wg-status)

Reviewed-on: #7

Makefile

@@ -1,5 +1,5 @@
 # Define list of directories you want to stow
-CONFIG_DIRS := btop doom hypr kitty nvim rclone starship tmux wallpapers waybar wireplumber wofi yazi zsh
+CONFIG_DIRS := btop doom hypr kitty local nvim rclone starship tmux wallpapers waybar wireplumber wofi yazi zsh
 
 all: stow_all
 	wal -i ~/.config/wallpapers/green_yellow_forest.jpg -o ~/.config/waybar/launch.sh

btop/.config/btop/btop.conf

@@ -1,18 +1,18 @@
-#? Config file for btop v. 1.4.4
+#? Config file for btop v.1.4.6
 
 #* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes.
 #* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes"
 color_theme = "/usr/share/btop/themes/everforest-dark-medium.theme"
 
 #* If the theme set background should be shown, set to False if you want terminal background transparency.
-theme_background = False
+theme_background = false
 
 #* Sets if 24-bit truecolor should be used, will convert 24-bit colors to 256 color (6x6x6 color cube) if false.
-truecolor = True
+truecolor = true
 
 #* Set to true to force tty mode regardless if a real tty has been detected or not.
 #* Will force 16-color mode and TTY theme, set all graph symbols to "tty" and swap out other non tty friendly symbols.
-force_tty = False
+force_tty = false
 
 #* Define presets for the layout of the boxes. Preset 0 is always all boxes shown with default settings. Max 9 presets.
 #* Format: "box_name:P:G,box_name:P:G" P=(0 or 1) for alternate positions, G=graph symbol to use for box.
@@ -22,10 +22,13 @@ presets = "cpu:1:default,proc:0:default cpu:0:default,mem:0:default,net:0:defaul
 
 #* Set to True to enable "h,j,k,l,g,G" keys for directional control in lists.
 #* Conflicting keys for h:"help" and k:"kill" is accessible while holding shift.
-vim_keys = True
+vim_keys = true
 
 #* Rounded corners on boxes, is ignored if TTY mode is ON.
-rounded_corners = True
+rounded_corners = true
+
+#* Use terminal synchronized output sequences to reduce flickering on supported terminals.
+terminal_sync = true
 
 #* Default symbols to use for graph creation, "braille", "block" or "tty".
 #* "braille" offers the highest resolution but might not be included in all fonts.
@@ -60,37 +63,40 @@ update_ms = 2000
 proc_sorting = "cpu lazy"
 
 #* Reverse sorting order, True or False.
-proc_reversed = False
+proc_reversed = false
 
 #* Show processes as a tree.
-proc_tree = True
+proc_tree = true
 
 #* Use the cpu graph colors in the process list.
-proc_colors = True
+proc_colors = true
 
 #* Use a darkening gradient in the process list.
-proc_gradient = True
+proc_gradient = true
 
 #* If process cpu usage should be of the core it's running on or usage of the total available cpu power.
-proc_per_core = True
+proc_per_core = true
 
 #* Show process memory as bytes instead of percent.
-proc_mem_bytes = True
+proc_mem_bytes = true
 
 #* Show cpu graph for each process.
-proc_cpu_graphs = True
+proc_cpu_graphs = true
 
 #* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate)
-proc_info_smaps = False
+proc_info_smaps = false
 
 #* Show proc box on left side of screen instead of right.
-proc_left = False
+proc_left = false
 
 #* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop).
-proc_filter_kernel = False
+proc_filter_kernel = false
 
 #* In tree-view, always accumulate child process resources in the parent process.
-proc_aggregate = True
+proc_aggregate = true
+
+#* Should cpu and memory usage display be preserved for dead processes when paused.
+keep_dead_proc_usage = false
 
 #* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available.
 #* Select from a list of detected attributes from the options menu.
@@ -104,25 +110,28 @@ cpu_graph_lower = "Auto"
 show_gpu_info = "Auto"
 
 #* Toggles if the lower CPU graph should be inverted.
-cpu_invert_lower = True
+cpu_invert_lower = true
 
 #* Set to True to completely disable the lower CPU graph.
-cpu_single_graph = False
+cpu_single_graph = false
 
 #* Show cpu box at bottom of screen instead of top.
-cpu_bottom = False
+cpu_bottom = false
 
 #* Shows the system uptime in the CPU box.
-show_uptime = True
+show_uptime = true
+
+#* Shows the CPU package current power consumption in watts. Requires running `make setcap` or `make setuid` or running with sudo.
+show_cpu_watts = true
 
 #* Show cpu temperature.
-check_temp = True
+check_temp = true
 
 #* Which sensor to use for cpu temperature, use options menu to select from list of available sensors.
 cpu_sensor = "Auto"
 
 #* Show temperatures for cpu cores also if check_temp is True and sensors has been found.
-show_coretemp = True
+show_coretemp = true
 
 #* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core.
 #* Use lm-sensors or similar to see which cores are reporting temperatures on your machine.
@@ -134,17 +143,20 @@ cpu_core_map = ""
 temp_scale = "celsius"
 
 #* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024.
-base_10_sizes = False
+base_10_sizes = false
 
 #* Show CPU frequency.
-show_cpu_freq = True
+show_cpu_freq = true
+
+#* How to calculate CPU frequency, available values: "first", "range", "lowest", "highest" and "average".
+freq_mode = "first"
 
 #* Draw a clock at top of screen, formatting according to strftime, empty string to disable.
 #* Special formatting: /host = hostname | /user = username | /uptime = system uptime
 clock_format = "%X"
 
 #* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort.
-background_update = True
+background_update = true
 
 #* Custom cpu model name, empty string to disable.
 custom_cpu_name = ""
@@ -154,43 +166,43 @@ custom_cpu_name = ""
 disks_filter = ""
 
 #* Show graphs instead of meters for memory values.
-mem_graphs = True
+mem_graphs = true
 
 #* Show mem box below net box instead of above.
-mem_below_net = True
+mem_below_net = true
 
 #* Count ZFS ARC in cached and available memory.
-zfs_arc_cached = True
+zfs_arc_cached = true
 
 #* If swap memory should be shown in memory box.
-show_swap = True
+show_swap = true
 
 #* Show swap as a disk, ignores show_swap value above, inserts itself after first disk.
-swap_disk = True
+swap_disk = true
 
 #* If mem box should be split to also show disks info.
-show_disks = True
+show_disks = true
 
 #* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar.
-only_physical = True
+only_physical = true
 
 #* Read disks list from /etc/fstab. This also disables only_physical.
-use_fstab = True
+use_fstab = true
 
 #* Setting this to True will hide all datasets, and only show ZFS pools. (IO stats will be calculated per-pool)
-zfs_hide_datasets = False
+zfs_hide_datasets = false
 
 #* Set to true to show available disk space for privileged users.
-disk_free_priv = False
+disk_free_priv = false
 
 #* Toggles if io activity % (disk busy time) should be shown in regular disk usage view.
-show_io_stat = True
+show_io_stat = true
 
 #* Toggles io mode for disks, showing big graphs for disk read/write speeds.
-io_mode = False
+io_mode = false
 
 #* Set to True to show combined read/write io graphs in io mode.
-io_graph_combined = False
+io_graph_combined = false
 
 #* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ".
 #* Example: "/mnt/media:100 /:20 /boot:1".
@@ -202,10 +214,10 @@ net_download = 100
 net_upload = 100
 
 #* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest.
-net_auto = True
+net_auto = true
 
 #* Sync the auto scaling for download and upload to whichever currently has the highest scale.
-net_sync = True
+net_sync = true
 
 #* Starts with the Network Interface specified here.
 net_iface = ""
@@ -214,26 +226,32 @@ net_iface = ""
 base_10_bitrate = "Auto"
 
 #* Show battery stats in top right if battery is present.
-show_battery = True
+show_battery = true
 
 #* Which battery to use if multiple are present. "Auto" for auto detection.
 selected_battery = "Auto"
 
 #* Show power stats of battery next to charge indicator.
-show_battery_watts = True
+show_battery_watts = true
 
-#* Set loglevel for "~/.config/btop/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
+#* Set loglevel for "~/.local/state/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
 #* The level set includes all lower levels, i.e. "DEBUG" will show all logging info.
 log_level = "WARNING"
 
+#* Automatically save current settings to config file on exit.
+save_config_on_exit = true
+
 #* Measure PCIe throughput on NVIDIA cards, may impact performance on certain cards.
-nvml_measure_pcie_speeds = True
+nvml_measure_pcie_speeds = true
 
 #* Measure PCIe throughput on AMD cards, may impact performance on certain cards.
-rsmi_measure_pcie_speeds = True
+rsmi_measure_pcie_speeds = true
 
 #* Horizontally mirror the GPU graph.
-gpu_mirror_graph = True
+gpu_mirror_graph = true
+
+#* Set which GPU vendors to show. Available values are "nvidia amd intel"
+shown_gpus = "nvidia amd intel"
 
 #* Custom gpu0 model name, empty string to disable.
 custom_gpu_name0 = ""

doom/.config/doom/init.el

@@ -150,7 +150,9 @@
        ;;lean              ; for folks with too much to prove
        ledger            ; be audit you can be
        lua               ; one-based indices? one-based indices
-       markdown          ; writing docs for people to ignore
+       (markdown          ; writing docs for people to ignore
+        +grip
+        +tree-sitter)
        ;;nim               ; python + lisp at the speed of c
        (nix               ; I hereby declare "nix geht mehr!"
         +lsp

hypr/.config/hypr/hyprland.conf

@@ -101,8 +101,8 @@ env = WLR_RENDERER_ALLOW_SOFTWARE,1
 
 # https://wiki.hyprland.org/Configuring/Variables/#general
 general {
-    gaps_in = 4.5
-    gaps_out = 9
+    gaps_in = 7.5
+    gaps_out = 15
 
     border_size = 2
 
@@ -147,8 +147,14 @@ animations {
 
 # See https://wiki.hyprland.org/Configuring/Dwindle-Layout/ for more
 dwindle {
-    pseudotile = true # Master switch for pseudotiling. Enabling is bound to mainMod + P in the keybinds section below
+    # Note: pseudotile variable removed in 0.55+. Use `pseudo` dispatcher to toggle per-window.
+    # Bound to $mainMod + P below.
+
+    # This prevents the layout from collapsing if you close one window
     preserve_split = true # You probably want this
+
+    # 0 -> follow mouse, 1 -> always left/top, 2 -> always right/bottom
+    force_split = 2
 }
 
 # See https://wiki.hyprland.org/Configuring/Master-Layout/ for more
@@ -208,20 +214,21 @@ $mainMod = SUPER # Sets "Windows" key as main modifier
 bind = $mainMod, T, exec, $terminal
 bind = $mainMod, D, killactive,
 bind = $mainMod SHIFT, Q, exit,
-bind = $mainMod, U, exec, ~/ExoKortex/2-Areas/IT/dotfiles/scripts/make_all.sh
+bind = $mainMod, U, exec, ~/ExoKortex/4-Automata/dotfiles/scripts/make_all.sh
 bind = $mainMod, M, exec, $monitoring
 bind = $mainMod, E, exec, $editor
 bind = $mainMod, V, togglefloating,
 bind = $mainMod, R, exec, $menu
 bind = $mainMod, Z, exec, $zen
-#bind = $mainMod, P, pseudo, # dwindle
-bind = $mainMod, P, togglesplit, # dwindle
+# togglesplit removed as standalone dispatcher in 0.55+; use `layoutmsg togglesplit` instead
+bind = $mainMod, P, pseudo, # dwindle
 bind = $mainMod, N, movecurrentworkspacetomonitor, -1
 bind = $mainMod SHIFT, N, movecurrentworkspacetomonitor, +1
 bind = $mainMod, X, swapwindow
-bind = $mainMod, B, exec, nerd-dictation begin
-bind = $mainMod, G, exec, nerd-dictation end
+bind = $mainMod, B, exec, python /home/tpouplier/ExoKortex/4-Automata/recordntrans/record_transcribe.py
+# bind = $mainMod, G, exec, nerd-dictation end
 bind = $mainMod, A, exec, $music
+bind = $mainMod, C, exec, emacsclient -n -c -e '(gortium/hermes-vterm)'
 
 # Full screen
 bind = SUPER, F, fullscreen 
@@ -287,8 +294,8 @@ bind = $mainMod SHIFT, 9, movetoworkspace, 9
 bind = $mainMod SHIFT, 0, movetoworkspace, 10
 
 # Example special workspace (scratchpad)
-bind = $mainMod, S, togglespecialworkspace, magic
-bind = $mainMod SHIFT, S, movetoworkspace, special:magic
+bind = $mainMod, S, togglespecialworkspace, tools
+bind = $mainMod SHIFT, S, movetoworkspace, special:tools
 
 # Scroll through existing workspaces with mainMod + scroll
 bind = $mainMod, mouse_down, workspace, e+1
@@ -376,4 +383,42 @@ workspace = 3, name:long-1, monitor:DP-5  # Right screen
 workspace = 4, name:long-2, monitor:DP-5  # Right screen
 workspace = 5, name:smoll, monitor:eDP-1  # Laptop screen
 #workspace = 4, name:windows, monitor:DP-4, on-created-empty:VBoxManage startvm "Windows 11"
-#workspace = special:scratchpad, on-created-empty:kitty
+workspace = special:tools, layout:dwindle, gapsin:0
+
+# Top Left: btop
+windowrule {
+    name = dashboard-btop
+    match:class = ^(btop)$
+    tile = true
+    workspace = special:tools
+}
+
+# Top Right: ncspot
+windowrule {
+    name = dashboard-ncspot
+    match:class = ^(ncspot)$
+    tile = true
+    workspace = special:tools
+}
+
+# Bottom Left: ncpamixer
+windowrule {
+    name = dashboard-ncpamixer
+    match:class = ^(ncpamixer)$
+    tile = true
+    workspace = special:tools
+}
+
+# Bottom Right: bluetuith
+windowrule {
+    name = dashboard-bluetuith
+    match:class = ^(bluetuith)$
+    tile = true
+    workspace = special:tools
+}
+
+# Bind to launch the suite (Run this once)
+bind = $mainMod, grave, exec, kitty --class btop btop
+bind = $mainMod, grave, exec, kitty --class ncspot ncspot
+bind = $mainMod, grave, exec, kitty --class ncpamixer ncpamixer
+bind = $mainMod, grave, exec, kitty --class bluetuith bluetuith

local/.local/share/applications/qet-xephyr.desktop

@@ -0,0 +1,8 @@
+[Desktop Entry]
+Name=QET (Xephyr)
+Comment=QElectroTech in nested X server for Wayland compatibility
+Exec=/home/tpouplier/ExoKortex/4-Automata/dotfiles/scripts/qet-xephyr.sh
+Icon=qelectrotech
+Type=Application
+Categories=Graphics;Engineering;
+Terminal=false

scripts/make_all.sh

@@ -1,5 +1,5 @@
 #!/bin/bash
-cd ~/ExoKortex/2-Areas/IT/dotfiles/
+cd ~/ExoKortex/4-Automata/dotfiles/
 make all
 if [ $? -eq 0 ]; then
     notify-send "Dotfiles" "Configuration reloaded successfully!"

scripts/qet-xephyr.sh

@@ -0,0 +1,21 @@
+#!/bin/bash
+# Launch QElectroTech in a nested Xephyr X server with Openbox
+# Works around Wayland drag-and-drop issue in QET
+
+XEPHYR_PID=""
+
+cleanup() {
+    kill $XEPHYR_PID 2>/dev/null
+    exit 0
+}
+trap cleanup SIGINT SIGTERM
+
+Xephyr -screen 1920x1080 :1 -title QET -br &
+XEPHYR_PID=$!
+
+sleep 1
+DISPLAY=:1 openbox &
+sleep 0.5
+DISPLAY=:1 qelectrotech &
+
+wait $XEPHYR_PID

scripts/rclone_post_install.sh

@@ -33,7 +33,7 @@ if systemctl --user is-active --quiet rclone_ftp_mount.service; then
     echo "Rclone service is already running."
 else
     echo "Starting the rclone service."
-    systemctl start rclone_ftp_mount.service || { echo "Failed to start the service"; exit 1; }
+    systemctl --user start rclone_ftp_mount.service || { echo "Failed to start the service"; exit 1; }
 fi
 
 echo "Post-installation steps for rclone completed successfully."

secrets/perso-mail.age

@@ -0,0 +1,9 @@
+-----BEGIN AGE ENCRYPTED FILE-----
+YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IHNzaC1lZDI1NTE5IEdoTUQ4QSBSTnZa
+REtrM2FwSngxY2FRWkdsWWNUU0JETW81eWYwUE9Ndy9TT096UFRnClRzbTJnWEhG
+WlAvVlhicjA0Um45TFZNL3VQaDBSMHNaWG1TOEthN1RrVlkKLT4gUXFLVUQ9Xnwt
+Z3JlYXNlIDIiIDdnPmZfQCBEClVpYVcxSEMvbnp0VFptdWtENmdQZUtYK05uUVFO
+ZWRtCi0tLSBIcGNFcXVKOWhjS3lGZUdNaDd3N2dMN21KT2JhUzIrWHc0UHFOcFlq
+TWRzClWaMFgCPM9T0pLoh/HyXVwAALd3fPUKll/VFjHa4eJIGjGa36g5lxU7BxTa
+39fa8FNrSHU=
+-----END AGE ENCRYPTED FILE-----

waybar/.config/waybar/config.jsonc

@@ -4,11 +4,11 @@
 	
 	// general settings
 	"position": "top",
-	"margin-top": 8,
+	"margin-top": 15,
 	"margin-bottom": 0,
 	"layer": "top",
-	"margin-left": 8,
-	"margin-right": 8,    
+	"margin-left": 15,
+	"margin-right": 15,
 	"spacing": 10,
 	"fixed-center": true,
 	"exclusive": true,

waybar/.config/waybar/modules.json

@@ -110,7 +110,7 @@
 			"car": "",
 			"default": ["", "", ""]
 		},
-		"on-click": "pwvucontrol"
+		"on-click": "kitty ncpamixer"
 	},
 	
 	// bluetooth

zsh/.zshrc

@@ -19,6 +19,33 @@ alias emacs="emacsclient -c -a emacs"
 # Opencode
 alias oc="opencode"
 
+# Hermes Agent - SSH directly to remote server
+alias hermes="ssh -t lazyworkhorse 'docker exec -it hermes /opt/hermes/.venv/bin/hermes'"
+
+hermes-cp() { 
+  if [ $# -eq 0 ]; then
+    echo "Usage: hermes-cp <file_or_directory> [...]"
+    echo ""
+    echo "Copies files/directories from your Arch laptop into the Hermes"
+    echo "agent container at /opt/data/home/ preserving directory structure."
+    echo ""
+    echo "Examples:"
+    echo "  hermes-cp document.pdf              # single file"
+    echo "  hermes-cp *.pdf                      # multiple files (glob)"
+    echo "  hermes-cp manuals/                   # whole directory"
+    echo "  hermes-cp manuals/ keyence-docs/     # multiple items"
+    echo ""
+    echo "To copy to a different destination inside the container:"
+    echo "  tar -czf - . | ssh gortium@lazyworkhorse \\"
+    echo "    \"docker exec -i hermes sh -c 'cd /opt/data/projects && tar -xzf -'\""
+    return 1
+  fi
+  # tar everything into a single SSH pipe, extract inside container
+  # Supports: single files, directories, glob patterns, mixed args
+  tar -czf - "$@" | ssh gortium@lazyworkhorse \
+    "docker exec -i hermes sh -c 'cd /opt/data/home && tar -xzf -'"
+}
+
 # Yazi
 alias y="yazi"
 function yy() {
@@ -62,6 +89,11 @@ alias dpa="docker ps -a"
 alias dl="docker ps -l -q"
 alias dx="docker exec -it"
 
+# WireGuard
+alias wg-up="sudo wg-quick up work-laptop"
+alias wg-down="sudo wg-quick down work-laptop"
+alias wg-status="sudo wg show"
+
 # Cd
 alias ..="cd .."
 alias ...="cd ../.."
@@ -125,3 +157,6 @@ export HYPRSHOT_DIR="Images"
 # Atuin
 #eval "$(atuin init zsh)"
 
+
+# Created by `pipx` on 2026-03-03 16:51:31
+export PATH="$PATH:/home/tpouplier/.local/bin"