Hypr config

hypr/.config/hypr/hypridle.conf

@@ -0,0 +1,34 @@
+general {
+    lock_cmd = pidof hyprlock || hyprlock       # avoid starting multiple hyprlock instances.
+    before_sleep_cmd = loginctl lock-session    # lock before suspend.
+    after_sleep_cmd = hyprctl dispatch dpms on  # to avoid having to press a key twice to turn on the display.
+}
+
+listener {
+    timeout = 300                                # 5min.
+    on-timeout = brightnessctl -s set 10         # set monitor backlight to minimum, avoid 0 on OLED monitor.
+    on-resume = brightnessctl -r                 # monitor backlight restore.
+}
+
+# turn off keyboard backlight, comment out this section if you dont have a keyboard backlight.
+listener { 
+    timeout = 150                                          # 2.5min.
+    on-timeout = brightnessctl -sd rgb:kbd_backlight set 0 # turn off keyboard backlight.
+    on-resume = brightnessctl -rd rgb:kbd_backlight        # turn on keyboard backlight.
+}
+
+listener {
+    timeout = 600                                 # 10min
+    on-timeout = loginctl lock-session            # lock screen when timeout has passed
+}
+
+listener {
+    timeout = 630                                 # 10.5min
+    on-timeout = hyprctl dispatch dpms off        # screen off when timeout has passed
+    on-resume = hyprctl dispatch dpms on          # screen on when activity is detected after timeout has fired.
+}
+
+listener {
+    timeout = 1800                                # 30min
+    on-timeout = systemctl suspend                # suspend pc
+}

hypr/.config/hypr/hyprland.conf

@@ -0,0 +1,361 @@
+# This is an example Hyprland config file.
+# Refer to the wiki for more information.
+# https://wiki.hyprland.org/Configuring/Configuring-Hyprland/
+
+# Please note not all available settings / options are set here.
+# For a full list, see the wiki
+
+# You can split this configuration into multiple files
+# Create your files separately and then link them to this file like this:
+# source = ~/.config/hypr/myColors.conf
+source = ~/.cache/wal/colors-hyprland.conf
+
+################
+### MONITORS ###
+################
+
+# See https://wiki.hyprland.org/Configuring/Monitors/
+# Useful command: 
+# hyprctl monitors all
+## Valkyrie setup
+# monitor=eDP-1,highres,auto,2 #3200x1800,0x0,2
+# monitor=HDMI-A-2,2560x1600,auto,1 #1600x0,1  #x-370,1,transform,1
+## Ingenuity setup
+monitor=eDP-1,1920x1080,0x0,1
+monitor=DP-3,1920x1080,1920x0,1        # HDMI screen
+# Horizontal setup
+#monitor=DP-4,1920x1080,-960x-1080,1    # Left screen
+#monitor=DP-6,1920x1080,-960x-1080,1    # Left screen
+#monitor=DP-5,1920x1080,960x-1080,1     # Right screen
+#monitor=DP-7,1920x1080,960x-1080,1     # Right screen
+# Vertical setup
+monitor=DP-4,1920x1080,0x-1080,1,transform,0        # Left screen
+monitor=DP-6,1920x1080,0x-1080,1,transform,0        # Left screen
+monitor=DP-5,1920x1080,1920x-1480,1,transform,1     # Right screen
+monitor=DP-7,1920x1080,1920x-1480,1,transform,1     # Right screen
+
+###################
+### MY PROGRAMS ###
+###################
+
+# See https://wiki.hyprland.org/Configuring/Keywords/
+
+# Set programs that you use
+$terminal = kitty
+$fileManager = emacsclient -c -a emacs --eval '(dirvish "$HOME")'
+$menu = wofi --show drun
+$zen = zen-browser
+$music = kitty ncspot
+$monitoring = kitty btop
+
+#################
+### AUTOSTART ###
+#################
+
+# Autostart necessary processes (like notifications daemons, status bars, etc.)
+# Or execute your favorite apps at launch like this:
+
+# exec-once = $terminal
+# exec-once = nm-applet &
+exec = hyprshade auto
+exec-once = udiskie
+exec-once = waybar
+exec-once = swww-daemon
+exec-once = swaync
+exec-once = hypridle
+exec-once = hyprlock
+exec-once = /usr/bin/emacs --daemon
+exec-once = dbus-update-activation-environment --systemd HYPRLAND_INSTANCE_SIGNATURE
+
+#############################
+### ENVIRONMENT VARIABLES ###
+#############################
+
+# See https://wiki.hyprland.org/Configuring/Environment-variables/
+
+env = XCURSOR_SIZE,24
+env = HYPRCURSOR_SIZE,24
+env = LIBVA_DRIVER_NAME,nvidia
+env = __GLX_VENDOR_LIBRARY_NAME,nvidia
+env = WLR_NO_HARDWARE_CURSOR,1
+env = XDG_SESSION_TYPE,wayland
+env = GBM_BACKEND,nvidia-drm
+env = WLR_RENDERER_ALLOW_SOFTWARE,1
+
+#####################
+### LOOK AND FEEL ###
+#####################
+
+# Refer to https://wiki.hyprland.org/Configuring/Variables/
+
+# https://wiki.hyprland.org/Configuring/Variables/#general
+general {
+    gaps_in = 4.5
+    gaps_out = 9
+
+    border_size = 2
+
+    # https://wiki.hyprland.org/Configuring/Variables/#variable-types for info about colors
+    col.active_border = $color1 $color1 $color2 45deg
+    col.inactive_border = $background
+
+    # Set to true enable resizing windows by clicking and dragging on borders and gaps
+    resize_on_border = false
+
+    # Please see https://wiki.hyprland.org/Configuring/Tearing/ before you turn this on
+    allow_tearing = false
+
+    layout = dwindle
+}
+
+# https://wiki.hyprland.org/Configuring/Variables/#decoration
+decoration {
+    rounding = 4
+
+    # Change transparency of focused and unfocused windows
+    active_opacity = 0.9
+    inactive_opacity = 0.75
+
+    # https://wiki.hyprland.org/Configuring/Variables/#blur
+    blur {
+        enabled = false
+        # enabled = true
+        # size = 16
+        # passes = 2
+        # new_optimizations = true
+    }
+    layerrule = blur, waybar
+}
+
+# https://wiki.hyprland.org/Configuring/Variables/#animations
+animations {
+    enabled = true
+
+    # Default animations, see https://wiki.hyprland.org/Configuring/Animations/ for more
+
+    bezier = myBezier, 0.05, 0.9, 0.1, 1.05
+
+    animation = windows, 1, 2, myBezier
+    animation = windowsOut, 1, 2, default, popin 80%
+    animation = border, 1, 2, default
+    animation = borderangle, 1, 2, default
+    animation = fade, 1, 2, default
+    animation = workspaces, 1, 2, default
+    animation = specialWorkspace, 1, 2, myBezier, slidefadevert -10%
+}
+
+# See https://wiki.hyprland.org/Configuring/Dwindle-Layout/ for more
+dwindle {
+    pseudotile = true # Master switch for pseudotiling. Enabling is bound to mainMod + P in the keybinds section below
+    preserve_split = true # You probably want this
+}
+
+# See https://wiki.hyprland.org/Configuring/Master-Layout/ for more
+master {
+    new_status = master
+}
+
+# https://wiki.hyprland.org/Configuring/Variables/#misc
+misc {
+    force_default_wallpaper = 0 # Set to 0 or 1 to disable the anime mascot wallpapers
+    disable_hyprland_logo = true # If true disables the random hyprland logo / anime girl background. :(
+}
+
+
+#############
+### INPUT ###
+#############
+
+# https://wiki.hyprland.org/Configuring/Variables/#input
+input {
+    kb_layout = us,ca #,halmak
+    kb_options = grp:win_space_toggle, ctrl:nocaps
+    # kb_variant =
+    # kb_model =
+    # kb_rules = 
+
+    follow_mouse = 1
+
+    sensitivity = 0.5 # -1.0 - 1.0, 0 means no modification.
+
+    touchpad {
+        natural_scroll = true
+        disable_while_typing = true
+    }
+}
+
+# https://wiki.hyprland.org/Configuring/Variables/#gestures
+gestures {
+    # workspace_swipe = false
+}
+
+# Example per-device config
+# See https://wiki.hyprland.org/Configuring/Keywords/#per-device-input-configs for more
+device {
+    name = epic-mouse-v1
+    sensitivity = -0.5
+}
+
+###################
+### KEYBINDINGS ###
+###################
+
+# See https://wiki.hyprland.org/Configuring/Keywords/
+$mainMod = SUPER # Sets "Windows" key as main modifier
+
+# Example binds, see https://wiki.hyprland.org/Configuring/Binds/ for more
+bind = $mainMod, T, exec, $terminal
+bind = $mainMod, D, killactive,
+bind = $mainMod SHIFT, Q, exit,
+bind = $mainMod, U, exec, ~/ExoKortex/2-Areas/IT/config/scripts/make_all.sh
+bind = $mainMod, M, exec, $monitoring
+bind = $mainMod, W, exec, $fileManager
+bind = $mainMod, V, togglefloating,
+bind = $mainMod, R, exec, $menu
+bind = $mainMod, Z, exec, $zen
+#bind = $mainMod, P, pseudo, # dwindle
+bind = $mainMod, P, togglesplit, # dwindle
+bind = $mainMod, N, movecurrentworkspacetomonitor, -1
+bind = $mainMod SHIFT, N, movecurrentworkspacetomonitor, +1
+bind = $mainMod, X, swapwindow
+bind = $mainMod, B, exec, nerd-dictation begin
+bind = $mainMod, G, exec, nerd-dictation end
+bind = $mainMod, A, exec, $music
+#
+# Full screen
+bind = SUPER, F, fullscreen 
+
+# Screenshot
+bind = , PRINT, exec, hyprshot -m output
+bind = $mainMod, PRINT, exec, hyprshot -m window
+bind = shift, PRINT, exec, hyprshot -m region
+
+# hyprlock
+bind = $mainMod, o, exec, hyprlock
+
+# Move focus with mainMod + arrow keys
+bind = $mainMod, h, movefocus, l
+bind = $mainMod, j, movefocus, d
+bind = $mainMod, k, movefocus, u
+bind = $mainMod, l, movefocus, r
+
+# Forward and reverse cycle (to focus floating)
+bind = $mainMod, Tab, cyclenext
+bind = $mainMod SHIFT, Tab, cyclenext, prev
+
+# Resize windows
+bind = $mainMod CTRL, l, resizeactive, 20 0
+bind = $mainMod CTRL, h, resizeactive, -20 0
+bind = $mainMod CTRL, k, resizeactive, 0 -20
+bind = $mainMod CTRL, j, resizeactive, 0 20
+
+# Swap window position
+bind = $mainMod SHIFT, h, swapwindow, l
+bind = $mainMod SHIFT, j, swapwindow, d
+bind = $mainMod SHIFT, k, swapwindow, u
+bind = $mainMod SHIFT, l, swapwindow, r
+
+# Move floating window
+bind = $mainMod SHIFT, l, moveactive, 100 0
+bind = $mainMod SHIFT, h, moveactive, -100 0
+bind = $mainMod SHIFT, k, moveactive, 0 -100
+bind = $mainMod SHIFT, j, moveactive, 0 100
+
+# Switch workspaces with mainMod + [0-9]
+bind = $mainMod, 1, workspace, 1
+bind = $mainMod, 2, workspace, 2
+bind = $mainMod, 3, workspace, 3
+bind = $mainMod, 4, workspace, 4
+bind = $mainMod, 5, workspace, 5
+bind = $mainMod, 6, workspace, 6
+bind = $mainMod, 7, workspace, 7
+bind = $mainMod, 8, workspace, 8
+bind = $mainMod, 9, workspace, 9
+bind = $mainMod, 0, workspace, 10
+
+# Move active window to a workspace with mainMod + SHIFT + [0-9]
+bind = $mainMod SHIFT, 1, movetoworkspace, 1
+bind = $mainMod SHIFT, 2, movetoworkspace, 2
+bind = $mainMod SHIFT, 3, movetoworkspace, 3
+bind = $mainMod SHIFT, 4, movetoworkspace, 4
+bind = $mainMod SHIFT, 5, movetoworkspace, 5
+bind = $mainMod SHIFT, 6, movetoworkspace, 6
+bind = $mainMod SHIFT, 7, movetoworkspace, 7
+bind = $mainMod SHIFT, 8, movetoworkspace, 8
+bind = $mainMod SHIFT, 9, movetoworkspace, 9
+bind = $mainMod SHIFT, 0, movetoworkspace, 10
+
+# Example special workspace (scratchpad)
+bind = $mainMod, S, togglespecialworkspace, magic
+bind = $mainMod SHIFT, S, movetoworkspace, special:magic
+
+# Scroll through existing workspaces with mainMod + scroll
+bind = $mainMod, mouse_down, workspace, e+1
+bind = $mainMod, mouse_up, workspace, e-1
+
+# Move/resize windows with mainMod + LMB/RMB and dragging
+bindm = $mainMod, mouse:272, movewindow
+bindm = $mainMod, mouse:273, resizewindow
+
+# Laptop multimedia keys for volume and LCD brightness
+bindel = ,XF86AudioRaiseVolume, exec, wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%+
+bindel = ,XF86AudioLowerVolume, exec, wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%-
+bindel = ,XF86AudioMute, exec, wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle
+bindel = ,XF86AudioMicMute, exec, wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle
+bindel = ,XF86MonBrightnessUp, exec, brightnessctl s 10%+
+bindel = ,XF86MonBrightnessDown, exec, brightnessctl s 10%-
+
+# Requires playerctl
+bindl = , XF86AudioNext, exec, playerctl next
+bindl = , XF86AudioPause, exec, playerctl play-pause
+bindl = , XF86AudioPlay, exec, playerctl play-pause
+bindl = , XF86AudioPrev, exec, playerctl previous
+
+# Emacs-everywhere
+bind = $mainMod, E, exec, emacsclient --eval '(thanos/type)'
+windowrulev2 = float,title:^(emacs-float)$
+
+# Play/Pause
+# bind = $mainMod, P, exec, playerctl play-pause
+
+# Next Track
+# bind = $mainmod SHIFT, L, exec, playerctl next
+
+# Previous Track
+# bind = $mainmod SHIFT, H, exec, playerctl previous
+
+# Volume Up (player volume)
+# bind = $mainmod , U, exec, playerctl volume 0.05+
+
+# Volume Down (player volume)
+# bind = $mainmod, D, exec, playerctl volume 0.05-
+
+# Stop Playback
+# bind = $mainmod, S, exec, playerctl stop
+
+##############################
+### WINDOWS AND WORKSPACES ###
+##############################
+
+# See https://wiki.hyprland.org/Configuring/Window-Rules/ for more
+# See https://wiki.hyprland.org/Configuring/Workspace-Rules/ for workspace rules
+
+# Example windowrule v1
+# windowrule = float, ^(kitty)$
+
+# Example windowrule v2
+# windowrulev2 = float,class:^(kitty)$,title:^(kitty)$
+
+# Ignore maximize requests from apps. You'll probably like this.
+windowrulev2 = suppressevent maximize, class:.*
+
+# Fix some dragging issues with XWayland
+windowrulev2 = nofocus,class:^$,title:^$,xwayland:1,floating:1,fullscreen:0,pinned:0
+
+workspace = 1, name:short-1, monitor:DP-4  # Left screen
+workspace = 2, name:short-2, monitor:DP-4  # Left screen
+workspace = 3, name:long-1, monitor:DP-5  # Right screen
+workspace = 4, name:long-2, monitor:DP-5  # Right screen
+workspace = 5, name:smoll, monitor:eDP-1  # Laptop screen
+#workspace = 4, name:windows, monitor:DP-4, on-created-empty:VBoxManage startvm "Windows 11"
+#workspace = special:scratchpad, on-created-empty:kitty

hypr/.config/hypr/hyprlock.conf

@@ -0,0 +1,111 @@
+source = $HOME/.cache/wal/colors-hyprland.conf
+
+general {
+    ignore_empty_input = true
+}
+
+background {
+    monitor =
+    path = $wallpaper
+    # color = $color1
+
+    # all these options are taken from hyprland, see https://wiki.hyprland.org/Configuring/Variables/#blur for explanations
+    blur_size = 4
+    blur_passes = 3 # 0 disables blurring
+    noise = 0.0117
+    contrast = 1.3000 # Vibrant!!!
+    brightness = 0.8000
+    vibrancy = 0.2100
+    vibrancy_darkness = 0.0
+}
+
+# Hours
+label {
+    monitor =
+    text = cmd[update:1000] echo "<b><big> $(date +"%H") </big></b>"
+    color = $color6
+    font_size = 112
+    font_family = Geist Mono 10
+    shadow_passes = 3
+    shadow_size = 4
+
+    position = 0, 220
+    halign = center
+    valign = center
+}
+
+# Minutes
+label {
+    monitor =
+    text = cmd[update:1000] echo "<b><big> $(date +"%M") </big></b>"
+    color = $color6
+    font_size = 112
+    font_family = Geist Mono 10
+    shadow_passes = 3
+    shadow_size = 4
+
+    position = 0, 80
+    halign = center
+    valign = center
+}
+
+# Today
+label {
+    monitor =
+    text = cmd[update:18000000] echo "<b><big> "$(date +'%A')" </big></b>"
+    color = $color7
+    font_size = 22
+    font_family = JetBrainsMono Nerd Font 10
+
+    position = 0, 30
+    halign = center
+    valign = center
+}
+
+# Week
+label {
+    monitor =
+    text = cmd[update:18000000] echo "<b> "$(date +'%d %b')" </b>"
+    color = $color7
+    font_size = 18
+    font_family = JetBrainsMono Nerd Font 10
+
+    position = 0, 6
+    halign = center
+    valign = center
+}
+
+# Degrees
+label {
+    monitor =
+    text = cmd[update:18000000] echo "<b>Feels like<big> $(curl -s 'wttr.in?format=%t' | tr -d '+') </big></b>"
+    color = $color7
+    font_size = 18
+    font_family = Geist Mono 10
+
+    position = 0, 40
+    halign = center
+    valign = bottom
+}
+
+input-field {
+    monitor =
+    size = 250, 50
+    outline_thickness = 3
+
+    dots_size = 0.26 # Scale of input-field height, 0.2 - 0.8
+    dots_spacing = 0.64 # Scale of dots' absolute size, 0.0 - 1.0
+    dots_center = true
+    dots_rouding = -1
+
+    rounding = 22
+    outer_color = $color0
+    inner_color = $color0
+    font_color = $color6
+    fade_on_empty = true
+    placeholder_text = <i>Password...</i> # Text rendered in the input box when it's empty.
+
+    position = 0, 120
+    halign = center
+    valign = bottom
+}

hypr/.config/hypr/hyprpaper.conf

@@ -0,0 +1,2 @@
+preload = ~/.config/wallpapers/tree_bark.jpg
+wallpaper = , ~/.config/wallpapers/tree_bark.jpg

hypr/.config/hypr/hyprshade.toml

@@ -0,0 +1,8 @@
+[[shades]]
+name = "vibrance"
+default = true  # will be activated when no other shader is scheduled
+
+[[shades]]
+name = "blue-light-filter"
+start_time = 19:00:00
+end_time = 06:00:00

hypr/.config/hypr/mocha.conf

@@ -0,0 +1,78 @@
+
+$rosewater = rgb(f5e0dc)
+$rosewaterAlpha = f5e0dc
+
+$flamingo = rgb(f2cdcd)
+$flamingoAlpha = f2cdcd
+
+$pink = rgb(f5c2e7)
+$pinkAlpha = f5c2e7
+
+$mauve = rgb(cba6f7)
+$mauveAlpha = cba6f7
+
+$red = rgb(f38ba8)
+$redAlpha = f38ba8
+
+$maroon = rgb(eba0ac)
+$maroonAlpha = eba0ac
+
+$peach = rgb(fab387)
+$peachAlpha = fab387
+
+$yellow = rgb(f9e2af)
+$yellowAlpha = f9e2af
+
+$green = rgb(a6e3a1)
+$greenAlpha = a6e3a1
+
+$teal = rgb(94e2d5)
+$tealAlpha = 94e2d5
+
+$sky = rgb(89dceb)
+$skyAlpha = 89dceb
+
+$sapphire = rgb(74c7ec)
+$sapphireAlpha = 74c7ec
+
+$blue = rgb(89b4fa)
+$blueAlpha = 89b4fa
+
+$lavender = rgb(b4befe)
+$lavenderAlpha = b4befe
+
+$text = rgb(cdd6f4)
+$textAlpha = cdd6f4
+
+$subtext1 = rgb(bac2de)
+$subtext1Alpha = bac2de
+
+$subtext0 = rgb(a6adc8)
+$subtext0Alpha = a6adc8
+
+$overlay2 = rgb(9399b2)
+$overlay2Alpha = 9399b2
+
+$overlay1 = rgb(7f849c)
+$overlay1Alpha = 7f849c
+
+$overlay0 = rgb(6c7086)
+$overlay0Alpha = 6c7086
+
+$surface2 = rgb(585b70)
+$surface2Alpha = 585b70
+
+$surface1 = rgb(45475a)
+$surface1Alpha = 45475a
+
+$surface0 = rgb(313244)
+$surface0Alpha = 313244
+
+$base = rgb(1e1e2e)
+$baseAlpha = 1e1e2e
+
+$mantle = rgb(181825)
+$mantleAlpha = 181825
+
+$crust = rgb(11111b)
+$crustAlpha = 11111b