Merge pull request 'feat: add WireGuard VPN stack' (#33) from feat/wireguard-vpn into master

Reviewed-on: #33

AGENTS.md

@@ -5,6 +5,7 @@ This document outlines the development conventions for this NixOS-based infrastr
 ## Build & Deployment
 
 - **Build/Deploy:** Use `nixos-rebuild switch --flake .#<hostname>` to build and deploy the configuration for a specific host.
+- **CRITICAL — Validate before pushing:** Always `nix build --no-link '.#nixosConfigurations.<hostname>.config.system.build.toplevel'` (or `nh os build`) and confirm it succeeds before pushing any changes. Never push untested NixOS configs.
 - **Development Shell:** Activate the development environment with `nix develop`.
 
 ## Linting & Formatting

flake.nix

@@ -12,10 +12,6 @@
       url = "git+https://git.lix.systems/lix-project/lix?ref=main";
       inputs.nixpkgs.follows = "nixpkgs";
     };
-    # uConsole CM5 hardware support
-    nixos-uconsole.url = "github:nixos-uconsole/nixos-uconsole";
-    # Raspberry Pi 5 hardware support
-    nixos-hardware.url = "github:nixos/nixos-hardware/master";
     self.submodules = true;
   };
 
@@ -83,20 +79,6 @@
               ./hosts/cyt-pi/hardware-configuration.nix
             ];
           };
-
-          uConsole = nixpkgs.lib.nixosSystem {
-            specialArgs = { inherit self keys paths inputs; };
-            modules = [
-              {
-                nixpkgs.overlays = overlays;
-                nixpkgs.config.allowUnfree = true;
-                nixpkgs.hostPlatform = "aarch64-linux";
-                nix.package = lix.packages."aarch64-linux".default;
-              }
-              ./hosts/uconsole/configuration.nix
-              ./hosts/uconsole/hardware-configuration.nix
-            ];
-          };
         };
         devShells.${system}.default = devShell;
       };

hosts/lazyworkhorse/configuration.nix

@@ -36,7 +36,7 @@
     "transparent_hugepage=always" # because mucho ram
   ];
   # 2. Load the specific drivers found by sensors-detect
-  boot.kernelModules = [ "nct6775" "lm96163" ];
+  boot.kernelModules = [ "nct6775" "lm96163" "iptable_nat" "iptable_filter" ];
   # 3. Force the nct6775 driver to recognize the chip if it's stubborn
   boot.extraModprobeConfig = ''
     options nct6775 force_id=0xd280
@@ -49,6 +49,26 @@
   networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
   networking.hostId = "deadbeef";
 
+  # WireGuard VPN client -- always up, connects to wg-easy server
+  # Create age-encrypted secrets before deploying (run on the host):
+  #   echo -n "<private_key>" | agenix -e secrets/wireguard_private_key.age
+  #   echo -n "<preshared_key>" | agenix -e secrets/wireguard_preshared_key.age
+  networking.wireguard.interfaces = {
+    wg0 = {
+      ips = [ "10.8.0.3/24" ];
+      privateKeyFile = config.age.secrets.wireguard_private_key.path;
+      peers = [
+        {
+          publicKey = "rY9zII3AOm8rog2rv02PyA3Bq7zdvTOGkZapfCV1DkE=";
+          presharedKeyFile = config.age.secrets.wireguard_preshared_key.path;
+          allowedIPs = [ "10.8.0.0/24" ];
+          endpoint = "vpn.lazyworkhorse.net:51820";
+          persistentKeepalive = 25;
+        }
+      ];
+    };
+  };
+
   # Set your time zone.
   time.timeZone = "America/Montreal";
 
@@ -158,7 +178,7 @@
     settings = {
       PasswordAuthentication = false;
       KbdInteractiveAuthentication = false;
-      PermitRootLogin = "prohibit-password"; 
+      # Additional hardening settings below in SERVER HARDENING section
     };
     hostKeys = [
       {
@@ -221,6 +241,11 @@
       path = self + "/assets/compose/homepage";
     };
 
+    vpn = {
+      path = self + "/assets/compose/vpn";
+      envFile = config.age.secrets.containers_env.path;
+    };
+
     # tak = {
     #   path = self + "/assets/compose/tak";
     # };
@@ -264,6 +289,20 @@
         mode = "0440";
         path = "/run/secrets/openclaw_gateway_token";
       };
+      wireguard_private_key = {
+        file = ../../secrets/wireguard_private_key.age;
+        owner = "root";
+        group = "root";
+        mode = "0400";
+        path = "/run/secrets/wireguard_private_key";
+      };
+      wireguard_preshared_key = {
+        file = ../../secrets/wireguard_preshared_key.age;
+        owner = "root";
+        group = "root";
+        mode = "0400";
+        path = "/run/secrets/wireguard_preshared_key";
+      };
     };
   };
 
@@ -308,6 +347,203 @@
   # Or disable the firewall altogether.
   # networking.firewall.enable = false;
 
+  # =============================================================================
+  # SERVER HARDENING - Firewall, Fail2ban, SSH, Kernel
+  # =============================================================================
+  
+  # Firewall - default deny, explicit allow
+  networking.firewall = {
+    # Enable firewall with default deny policy (NixOS firewall denies all by default)
+    enable = true;
+    allowPing = true;
+    
+    # Only essential ports exposed to internet
+    allowedTCPPorts = [
+      2424  # SSH (non-standard port)
+      2222  # Gitea (version control)
+      80    # HTTP (Traefik redirect)
+      443   # HTTPS (Traefik)
+      # 8000  # Portainer - REVIEW: internal only?
+      # 4242  # Coms - REVIEW: internal only?
+      # 5000  # TAK API - REVIEW: internal only?
+      # 8087  # TAK Connect - REVIEW: internal only?
+      # 8089  # TAK Management - REVIEW: internal only?
+    ];
+    
+    allowedUDPPorts = [
+      51820 # WireGuard VPN
+    ];
+    
+    # Rate limiting and attack prevention
+    extraCommands = ''
+      # 1. Wipe the INPUT chain clean at the start of every activation
+      iptables -F INPUT
+      
+      # Rate limit SSH connections (max 20 new connections per 60 seconds)
+      iptables -A INPUT -p tcp --dport 2424 -m state --state NEW -m recent --set
+      iptables -A INPUT -p tcp --dport 2424 -m state --state NEW -m recent --update --seconds 60 --hitcount 20 -j DROP
+      
+      # Rate limit HTTP/HTTPS (protects Traefik)
+      iptables -A INPUT -p tcp --dport 80 -m state --state NEW -m limit --limit 25/minute --limit-burst 100 -j ACCEPT
+      iptables -A INPUT -p tcp --dport 443 -m state --state NEW -m limit --limit 25/minute --limit-burst 100 -j ACCEPT
+      
+      # Drop invalid packets
+      iptables -A INPUT -m state --state INVALID -j DROP
+      
+      # Log dropped packets (rate limited)
+      iptables -A INPUT -m limit --limit 5/min -j LOG --log-prefix "IPTables-Dropped: " --log-level 4
+
+      # 3. CRITICAL: Re-link the NixOS default firewall chain
+      # Without this line, the 'allowedTCPPorts' in your Nix config will be ignored!
+      iptables -A INPUT -j nixos-fw
+    '';
+  };
+
+  # Fail2ban - automatic IP banning
+  services.fail2ban = {
+    enable = true;
+    maxretry = 3;
+    bantime = "1h";
+    banaction = "iptables-multiport";
+    
+    jails = {
+      # SSH brute force protection (uses systemd journal backend)
+      sshd = {
+        enabled = true;
+        settings = {
+          filter = "sshd";
+          port = "2424";
+          maxretry = 3;
+          bantime = "1h";
+        };
+      };
+      
+      # Recidive - ban repeat offenders for 1 week
+      recidive = {
+        enabled = true;
+        settings = {
+          filter = "recidive";
+          logpath = "/var/log/fail2ban.log";
+          bantime = "1w";
+          findtime = "1d";
+          maxretry = 3;
+        };
+      };
+      
+      # HTTP authentication failures (Traefik)
+      http-auth = {
+        enabled = true;
+        settings = {
+          filter = "traefik-auth";
+          port = "80,443";
+          logpath = "/var/log/traefik/access.log";
+          maxretry = 5;
+          bantime = "1h";
+        };
+      };
+      
+      # HTTP scanning/attacks (Traefik)
+      http-botsearch = {
+        enabled = true;
+        settings = {
+          filter = "traefik-botsearch";
+          port = "80,443";
+          logpath = "/var/log/traefik/access.log";
+          maxretry = 2;
+          bantime = "2h";
+        };
+      };
+    };
+  };
+  
+  # Custom fail2ban filters for Traefik
+  environment.etc."fail2ban/filter.d/traefik-auth.conf".text = ''
+    [Definition]
+    failregex = ^<HOST> -.*"(GET|POST|HEAD|PUT|DELETE).*" (401|403) \d+.*$
+    ignoreregex =
+  '';
+  
+  environment.etc."fail2ban/filter.d/traefik-botsearch.conf".text = ''
+    [Definition]
+    failregex = ^<HOST> -.*"(GET|POST|HEAD|PUT|DELETE).*" 404 \d+.*$
+                ^<HOST> -.*"(GET|POST|HEAD|PUT|DELETE).*/(\.|wp-|php|admin|login|xmlrpc|\.env|\.git|\.aws|\.azure).*" \d+.*$
+    ignoreregex =
+  '';
+
+  # SSH hardening
+  services.openssh.settings = {
+    PermitRootLogin = "no";
+    MaxAuthTries = 3;
+    MaxSessions = 10;
+    LoginGraceTime = 30;
+    ClientAliveInterval = 300;
+    ClientAliveCountMax = 2;
+    PermitEmptyPasswords = "no";
+    ChallengeResponseAuthentication = "no";
+    UsePAM = true;
+    LogLevel = "VERBOSE";
+    X11Forwarding = false;
+    AllowTcpForwarding = "no";
+    AllowAgentForwarding = "no";
+    PermitTunnel = "no";
+  };
+
+  # Kernel network hardening
+  boot.kernel.sysctl = {
+    # IP Spoofing protection
+    "net.ipv4.conf.all.rp_filter" = 1;
+    "net.ipv4.conf.default.rp_filter" = 1;
+    
+    # Ignore ICMP broadcasts
+    "net.ipv4.icmp_echo_ignore_broadcasts" = 1;
+    
+    # Disable source routing
+    "net.ipv4.conf.all.accept_source_route" = 0;
+    "net.ipv4.conf.default.accept_source_route" = 0;
+    "net.ipv6.conf.all.accept_source_route" = 0;
+    "net.ipv6.conf.default.accept_source_route" = 0;
+    
+    # Disable redirects
+    "net.ipv4.conf.all.send_redirects" = 0;
+    "net.ipv4.conf.default.send_redirects" = 0;
+    
+    # SYN flood protection
+    "net.ipv4.tcp_syncookies" = 1;
+    "net.ipv4.tcp_max_syn_backlog" = 2048;
+    "net.ipv4.tcp_synack_retries" = 2;
+    "net.ipv4.tcp_syn_retries" = 5;
+    
+    # Log martian packets
+    "net.ipv4.conf.all.log_martians" = 1;
+    "net.ipv4.conf.default.log_martians" = 1;
+    
+    # Ignore redirects
+    "net.ipv4.conf.all.accept_redirects" = 0;
+    "net.ipv4.conf.default.accept_redirects" = 0;
+    "net.ipv4.conf.all.secure_redirects" = 0;
+    "net.ipv4.conf.default.secure_redirects" = 0;
+    "net.ipv6.conf.all.accept_redirects" = 0;
+    "net.ipv6.conf.default.accept_redirects" = 0;
+    
+    # Connection tuning
+    "net.core.somaxconn" = 4096;
+    "net.core.netdev_max_backlog" = 65536;
+    "net.ipv4.tcp_max_orphans" = 65536;
+    "net.ipv4.tcp_fin_timeout" = 15;
+    "net.ipv4.tcp_keepalive_time" = 300;
+    "net.ipv4.tcp_keepalive_probes" = 5;
+    "net.ipv4.tcp_keepalive_intvl" = 15;
+  };
+
+  # Audit logging
+  security.auditd.enable = true;
+  
+  # Fail2ban log directory
+  systemd.tmpfiles.rules = [
+    "d /var/log/fail2ban 0755 root root -"
+    "d /var/log/traefik 0755 root root -"
+  ];
+
   # Copy the NixOS configuration file and link it from the resulting system
   # (/run/current-system/configuration.nix). This is useful in case you
   # accidentally delete configuration.nix.

hosts/uconsole/configuration.nix

@@ -1,191 +0,0 @@
-{ config, lib, pkgs, paths, self, keys, inputs, ... }:
-
-let
-  # Reticulum Network Stack - build from PyPI
-  reticulum = pkgs.python3Packages.buildPythonPackage {
-    pname = "reticulum";
-    version = "0.7.0";
-    format = "pyproject";
-    src = pkgs.python3Packages.fetchPypi {
-      pname = "reticulum";
-      version = "0.7.0";
-      hash = "sha256-Yku40tRpQh22m4HX142cU/VevHAEfgHZicKFOyp1U/o=";
-    };
-  };
-
-  # NomadNet - Reticulum browser/messaging
-  nomadnet = pkgs.python3Packages.buildPythonPackage {
-    pname = "nomadnet";
-    version = "0.5.2";
-    format = "pyproject";
-    src = pkgs.python3Packages.fetchPypi {
-      pname = "nomadnet";
-      version = "0.5.2";
-      hash = "sha256-WP4IrlKLzFP0U8/00mOo8D9Jp2ubr6Q0peKbw401Nhw=";
-    };
-    propagatedBuildInputs = [ reticulum ];
-  };
-
-  # LXMF - Lightweight Mesh Exchange Protocol
-  lxmf = pkgs.python3Packages.buildPythonPackage {
-    pname = "lxmf";
-    version = "0.5.1";
-    format = "pyproject";
-    src = pkgs.python3Packages.fetchPypi {
-      pname = "lxmf";
-      version = "0.5.1";
-      hash = "sha256-2zwTgG283qx1Bt6TKaGJtcwPr2tCNOOIASu8RXC/QLE=";
-    };
-    propagatedBuildInputs = [ reticulum ];
-  };
-
-  # Sidechannel - Visual UI for Reticulum
-  sidechannel = pkgs.python3Packages.buildPythonPackage {
-    pname = "sidechannel";
-    version = "0.1.0";
-    format = "pyproject";
-    src = pkgs.python3Packages.fetchPypi {
-      pname = "sidechannel";
-      version = "0.1.0";
-      hash = "sha256-0000000000000000000000000000000000000000000=";
-    };
-    propagatedBuildInputs = [ reticulum ];
-  };
-in
-{
-  # --- CORE HARDWARE (CM5 / RPi5) ---
-  imports = [
-    inputs.nixos-uconsole.nixosModules.uconsole
-    inputs.nixos-hardware.nixosModules.raspberry-pi-5
-  ];
-
-  uconsole = {
-    enable = true;
-    variant = "cm5"; # Hardware target: CM5/RPi5
-    # Fixes the landscape orientation at boot
-    videoMode = "720x1280M@60D,panel_orientation=right_side_up";
-  };
-
-  # Firmware for Wi-Fi and Bluetooth
-  hardware.enableRedistributableFirmware = true;
-  hardware.raspberry-pi."5".apply-overlays-dtmerge.enable = true;
-  
-  # Enable GPU acceleration (VideoCore VII)
-  hardware.graphics.enable = true;
-
-  # Bootloader parameters for display rotation and console
-  boot.kernelParams = [ 
-    "video=DSI-1:720x1280M@60D,panel_orientation=right_side_up"
-    "console=tty1"
-  ];
-
-  # --- BASIC HOST INFO ---
-  networking.hostName = "uConsole";
-  networking.networkmanager.enable = true;
-  time.timeZone = "America/Montreal";
-  i18n.defaultLocale = "en_CA.UTF-8";
-
-  # --- GPS DAEMON ---
-  services.gpsd = {
-    enable = true;
-    devices = [ "/dev/ttyAMA0" ]; # Default port for RPi5/CM5 GPS
-    nowait = true;
-  };
-
-  # --- USER CONFIGURATION ---
-  users.users.thierry = {
-    isNormalUser = true;
-    description = "Thierry";
-    extraGroups = [ 
-      "wheel"      # Sudo
-      "dialout"    # Access to serial/HAM rigs
-      "plugdev"    # Access to USB SDRs
-      "wireshark"  # Packet capture without root
-      "video"      # Hardware acceleration access
-      "networkmanager"
-    ];
-    openssh.authorizedKeys.keys = [
-      keys.users.gortium.main
-      keys.users.gortium.gitea
-    ];
-  };
-
-  # --- INTERFACE (WAYLAND/SWAY) ---
-  # Sway is recommended for the uConsole's low resources
-  programs.sway = {
-    enable = true;
-    extraOptions = [ "--unsupported-gpu" ]; # Often needed for RPi
-  };
-
-  # --- SOFTWARE TOOLKITS ---
-  environment.systemPackages = with pkgs; [
-    # Base Tools (for your Doom Emacs environment)
-    emacs-pgtk      # Emacs with Wayland support
-    git             # Required for Doom Emacs / Flakes
-    ripgrep         # Fast searching for Emacs/CLI
-    fd              # Better find for Emacs
-    htop            # Resource monitor
-    tmux            # Terminal multiplexer
-    neovim          # Alternative editor
-
-    # HAM RADIO (Digital Modes)
-    js8call         # Weak-signal keyboard messaging
-    wsjtx           # FT8, JT65, etc.
-    fldigi          # Digital modem (PSK, RTTY)
-    pat             # Winlink client (Use 'pat configure' after install)
-    direwolf        # Software TNC for APRS
-    chirp           # Radio programming
-    hamlib          # Rig control (rigctl)
-    trustedqsl      # LotW log signing
-
-    # SDR + RF ANALYSIS
-    sdrpp           # Modern SDR GUI (Best for uConsole)
-    gqrx            # Classic SDR receiver
-    rtl-sdr         # Drivers for RTL2832U
-    inspectrum      # Offline signal analysis
-    soapysdr-with-plugins # Hardware abstraction layer
-
-    # LORA, MESH & RETICULUM
-    meshtastic      # CLI tools for Meshtastic nodes
-    reticulum       # The RNS stack (rnsd, rnsh) - built from PyPI
-    nomadnet        # Reticulum browser/messaging
-    lxmf            # Lightweight Mesh Exchange Protocol
-    sidechannel     # Visual UI for Reticulum communication
-
-    # HACKING & SECURITY (Kali-like suite)
-    nmap            # Port scanning
-    metasploit      # Exploitation framework
-    aircrack-ng     # Wi-Fi auditing
-    kismet          # Wireless sniffer (Essential for your Pi Zero project)
-    bettercap       # MITM and network attack tool
-    wireshark       # Protocol analyzer
-    burpsuite       # Web vulnerability scanner
-    hashcat         # Password recovery
-    john            # John the Ripper (password cracking)
-    sqlmap          # Automated SQL injection
-
-    # GPS & OFFLINE MAPPING
-    foxtrotgps      # Lightweight map viewer (Perfect for small screens)
-    viking          # GPS data editor and map viewer
-    gpsbabel        # GPS data conversion
-    marble          # KDE Virtual Globe (supports offline tiles)
-  ];
-
-  # Udev rules for SDR and Radio hardware access
-  services.udev.packages = [ 
-    pkgs.rtl-sdr 
-    pkgs.librtlsdr 
-  ];
-
-  # Enable Wireshark privilege separation
-  programs.wireshark.enable = true;
-
-  # Enable OpenSSH
-  services.openssh = {
-    enable = true;
-    settings.PermitRootLogin = "prohibit-password";
-  };
-
-  # System state version
-  system.stateVersion = "23.11";
-}

hosts/uconsole/hardware-configuration.nix

@@ -1,30 +0,0 @@
-{ config, lib, pkgs, modulesPath, ... }:
-
-{
-  imports =
-    [ (modulesPath + "/installer/scan/not-detected.nix")
-    ];
-
-  boot.initrd.availableKernelModules = [ "xhci_pci" "usbhid" "sdhci_pci" ];
-  boot.initrd.kernelModules = [ ];
-  boot.kernelModules = [ ];
-  boot.extraModulePackages = [ ];
-
-  # uConsole CM5 specific filesystem (SD card boot)
-  fileSystems."/" =
-    { device = "/dev/disk/by-label/NIXOS_SD";
-      fsType = "ext4";
-      options = [ "noatime" ];
-    };
-
-  fileSystems."/boot" =
-    { device = "/dev/disk/by-label/FIRMWARE";
-      fsType = "vfat";
-    };
-
-  swapDevices = [ ];
-
-  # uConsole CM5 is ARM64
-  nixpkgs.hostPlatform = lib.mkDefault "aarch64-linux";
-  hardware.enableRedistributableFirmware = true;
-}

lib/keys.nix

@@ -18,9 +18,5 @@
       gitea = "";
       bootstrap = "age1r796v2uldtspawyh863pks74sd2pwcan8j4e4pjzsvkmr3vjja9qpz5ste";
     };
-    # uConsole CM5 - key to be generated on first boot
-    uconsole = {
-      main = "";
-    };
   };
 }

modules/nixos/services/ollama_init_custom_models.nix

@@ -14,8 +14,25 @@
         local base_model=$2
         if ! ${pkgs.docker}/bin/docker exec ollama ollama list | grep -q "$model_name"; then
           echo "$model_name not found, creating from $base_model..."
+          
+          # We use a custom TEMPLATE block to strip the 'currentDate' function 
+          # which is unsupported in Ollama 0.5.7 but present in Devstral's default manifest.
           ${pkgs.docker}/bin/docker exec ollama sh -c "cat <<EOF > /root/.ollama/$model_name.modelfile
 FROM $base_model
+TEMPLATE \"\"\"{{- if .System }}
+[SYSTEM_PROMPT]
+{{ .System }}
+[/SYSTEM_PROMPT]
+{{- end }}
+{{- range .Messages }}
+{{- if eq .Role \"user\" }}
+[INST]
+{{ .Content }}
+[/INST]
+{{- else if eq .Role \"assistant\" }}
+{{ .Content }}
+{{- end }}
+{{- end }}\"\"\"
 PARAMETER num_ctx 131072
 PARAMETER num_predict 4096
 PARAMETER num_keep 1024
@@ -26,6 +43,7 @@ PARAMETER stop \"[/INST]\"
 PARAMETER stop \"</s>\"
 EOF"
           ${pkgs.docker}/bin/docker exec ollama ollama create "$model_name" -f "/root/.ollama/$model_name.modelfile"
+          ${pkgs.docker}/bin/docker exec ollama rm "/root/.ollama/$model_name.modelfile"
         else
           echo "$model_name already exists, skipping."
         fi
@@ -36,6 +54,10 @@ EOF"
       
       # Create Devstral
       create_model_if_missing "devstral-small-2:24b-128k" "devstral-small-2:24b" 
+      
+      # create_model_if_missing "qwen2.5-coder:32b-128k" "qwen2.5-coder:32b"
+      
+      # create_model_if_missing "mistral-large-planner:123b" "mistral-large:123b-instruct-v2407-q4_K_S"
     '';
     serviceConfig = {
       Type = "oneshot";

secrets/containers.env.age

@@ -1,34 +1,36 @@
 -----BEGIN AGE ENCRYPTED FILE-----
-YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IHNzaC1lZDI1NTE5IEdoTUQ4QSBOL29w
+YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IHNzaC1lZDI1NTE5IEdoTUQ4QSBWNEpt
-eGk1N2xxTHJtaUEvWWZmbkh1bk11Tjk3anNnMDB1cCtPYUMzdTNJCkdhQ08vblNG
+cGFNeVBBaDRqb3pLSEZGQW0wb3VmVnBoZCswUFkzbnBLUnJ0QTNrClRqVkk4RUVO
-UlV1K2xVTGZVTzFWYXAzcjZaMWs0RTFWdStKSmlSTURvK1EKLT4gLC1zKU8zVkgt
+d29KYjd5YUcwankvaTFmVHUxQVpDT2ZYWHRaY3JXTUtQMU0KLT4gKXBtQ3UsXi1n
-Z3JlYXNlIFUiXFcpS302IHByVn5jOy0gRDMKQjV3SHpDWUIybGFyQUg3ZlR0R2hV
+cmVhc2UgNnwxYCBXVyA/KCQmIHt9NAo3OTZVUHR2UXkvaEFwY0ZBdEJsaFpsbHJ0
-eWM3SFlCVW5mdlpBVUF3a0xpNlZCeGNUd1oxTTlkc1RkTXdZS0lFTmN3Ci0tLSA3
+cklKcDVHcEdWMEdPSkpnN0FiRU43RW5hUWFMdjR3WFRRSFBLSGlmClM3cTNJWlNM
-VlBqM1VLWllZc0JnOTMvUFRjMU13OTdzMmhsdGJubkk5eGpERVVLYUk4Cnzh5UbU
+TExkdHdXUHJISkNIaE1TTUxUc1NUWkV1a09HeFU3bVZwQXMKLS0tIGhOcXFTUElS
-FlgqpM8jkJ6XlsaIDCw/G3D6uJ/GRJW4gIekuhAUxpZJrc8eOA8ZuHfGrBbH3acV
+azJJNnEreUhMWTJBaVZGSTJPRUFqQkVYS01KRENUVVpZSDgK8+8onFejroBo7MeO
-tVafX5F0Kr2oOblqZ6gduZOUS52KmWH8stiBJM+e5ZZ7zRQVE4PJUKUPCzi+WdcH
+dW+so4lOsq4zJKn3f0cxmCFg1f0X8zt6h4Uc3A5Cvr1uU+6yw1FWmJ7xa3jJz3lO
-zr295T//FOdicrYHdsjfziKEHzBtUCFiATW05+O2zMjYjO6cPzePcCzPWinwiID6
+EEaKQJXYC+xIIKGcA7qILa0SFp4a/4OuYjcg27HrlPhg7u5wDhQrd0LdVEe1Xngp
-V+f6ngfkkQaj3wBGkzaieQJzRcdSwky21aVhGCCX/bvqx61iW2d5QAKxGbtQ2RcG
+ZivX7P7HwIna3X8C+TL+K2v/AG2N/z86cdKfRvxyMKNbHhYw+CfHEnWgh8tJ++4h
-X1okr+xunAM94nzDMv46vyN97KxY7cZd4pAaOxoICc2Tfhtw6F+iS6QkQh1odJzO
+G9evNniuNqte6cQaRe7jODfPNW4FuY/Sb7barlJ/M9iAQdYAdyLAzU1LABeHeUfD
-7ZH+sSQCvndG+8z9shXGiHalASF5tdguM+JlEvAGljcaiAUtsQWxr9CoWiEkC6c6
+wtHjxy9DUZ55Vg8bB8M2JJU9MkoRT4ewiVd9LeC1GWeVmKsm93wsmrov714i7U2j
-NCaECSYO8Il+SXBQnSZSGJSNDhuPYCYrsjXGSAONFixuyeslAkq9x2WUaUS4H063
+wHtDkjqEF2MmzuQc18sjNaAHiwz8j6o5xU2L/Q4+Q707yISWG7RGZYh389Cr1rnw
-1QvRF7XO2tBPtgCLsSjdiGp0h+ImUaGdu6fDR7zrDsGsaAFCSFeH/rGNNXRQ2vP2
+siUq/Vunqw2wk13+J/4vu9nqt5mMktBaCtp+QiWIurjwB5LUAyChrSm+dg5lb0Mt
-CSfPfDDCqpUSCn0WuA30BtaPLxGmZT6OjFevKzYMNDmdeq9ia/q8K0hmjLUBdN3k
+UhSc0lq1+E3vxAXM2Hmk+vP86VD+6WJvAU82VFApF1s6zG2FU1/AcOVVf54nan/q
-tdYWbwoaf4gYbUWxSleD768b0Jgxss9Vod+sFQ+NYRksdGIeyND+aQIc312XehfA
+f+rgSFfASHQCYSblUJHyEtwLNsWEmTGmOEn1buUKD/H0zatPQnc0rYpjlx2V0Sjd
-qHFBS8nlj7eUF5bdvCYQ64z741mH4cNlGxyjPBH1x8FHnEOocJXYt1l2AZSRJmJA
+6yB5+wPrZ0AkN1pjcsPKOv8Kaog2DzqIjib+SaSTaRxWHQEb9uzvaReAcYI5HOpE
-c3z0QGXyuCbsrLBXWK1EKa/Juo4PGGsEVoLRhwJAQy9+i1JN0yrfRvSPyzvD4px6
+gkC040HN33BItATbo4+hz70Im8Ni/VXD+g6yzM6Hj1hJL+PinTKeg5keQRFIZjMx
-wRPzlZ80MQdb2lv84WS/zcOEZmZzlLntszTRRdIfAsuaavP2Rquh4rEXABYeTZwp
+grzievB2wVBBgLgN3qMdTFmpplaL7iL702JjXZUTTK9Izp+9wiCsV1fTa53FWDht
-5dem79s8bdW2nFsGMNz1OQKQwocyjYu1jJMHu6Gp7Ngdl1xyW7xfg0dezE1c0cIh
+ylFL5SWElqXjK+QBXxAe+Jk6VQov5HI21YDXL67S554ABeRok23wxrQ31TCI4xq9
-xt1aLER9YJp4n5to5cOH16l3mjDHnAvABx38xE9loNL3399J/evw7LxpTYQ4v2Xv
+PQV7VtNRjyVud7S29m3OwpWOsgTZhn+JclHj2v4bNJzJkJnZRTmcvGPktzRI5+R4
-x8xnDHcqJ+deFSwyuUnMS5DkUeYuHmUl0Q2WYcfY+ibCmcgCb2ObTtuN1/ZxNYrL
+e5vxVhGnJDzI71txaHl8+xS1lu9VzCQUrxX6TXyTRV4KjIOz0g06JOBgmBRBvJca
-OKrnmfuSvBgyuIOj5e6uWW0+Zs8dHKXu2TgV8WignxOhl5zQgCpCBlqVfO0t+NCu
+7MZbC65xpisl/gyLRbgkVga3t94dPV+dpZsn8eq6427IyRbKslJefatggR9//c6I
-Gi26hU/fhGWQ/1oQa3VkpGsypZbJpgQvfWxfcGHP/MMhnl01zzlP8/aexSY3pAxf
+5N5fl0fR3gJQMB+HRbipBH2YsdbdWJyb4Nn6STZxIfrqoG/xC6C1raF0xK7hUx6i
-fz9v0IVh6xxtu3zbiiVzUsXbfG7t+xY98jMphf4AS2mWva3GWVmhhu0lS3J3P+go
+4DUDSPohM8fOIswQPfE+FH3eygfzu/Ln5+ghsgHTEhgFvmgMvyxaAt6kHIzIUhMX
-YEEP4rOFHeU0Y1/6kLydTXvz4jMH0H92XQIzshd7vzQnEJPUPAzqRmw3LKYGgCI+
+M3dASr4VPDpIXuXsRWwYLEifhzxsuvwVxfwtsnCaR6XKijsYECWGDdYOWHdleeqx
-wZEnxJ6ckqTkGBFnxTpy9LLllwmnz2Ky87nY3XAmqxlhb2Ap1XFAlfgszmGjc+Il
+wDPhxEesfFVhKxhrKY9Ir8k9/FFBKQU/3GjW4+SMAg5Al1YEzxshP9vKuVcsei7W
-KkIgoWQHTUm6QM9ta++oUTIDneOvxGd0zZsqoEhiC/7E01BNNZ6E58TeJU3fDlA3
+JDwAwotNXaCm6NBckiyZJE53ou6+gckPY7V9cOfnuH74Z9ywkFzB3HW3ZlonaGyM
-mX6n05XjwPRpgXZfayPoAgBlZc2H4KeiynxwNZ/dWu7qz7L6Ppk6Nvtly8giTbFx
+oGmLGcccavFtyhg5s/As4i6X8ARIpDiwe59Pn3GNXMctySqIrrr2ogUoXgrfFCie
-CA+tto7vq+D+CAEJ4bgyq4BCH4GL4APrhPcWp98Mko1WCiRTIKgkZxQCYvlg/LZq
+6GOTdeMW7GeOSdJUxCofghlspS/nq01Og77VI/beWYrIwLubSka6Zaltww9zgObk
-LNhMacP9T1qTvNC+yR1NEMiegE3APzk6CkDpVaO9+5f/sqifNPINCMothenI9ePw
+/FGEMgFkEpq7iyCvYSPA8F46pJKvnMP3S84AWCPmcTcHeg4lwGPvs6btexXBGdoz
-zjQLI3Mo1m73bkomytUZ7i1VstP5sEZ5LF72Sq7BpR3oQ3Gp0CAN9w==
+nkCyq7wdH5Nngm7jUbl88LtaLZPAQkuqXphBVTnrF9Ofbnb4iRZ2Op4xpx9rGyvx
+mO6UEhL6V1i2YZFNkNMg/W8aoMiUgBdqbkxaxblT9L0aNdlFU9+LbWYolURVEadd
+Qjv0Z1gMA+tsuBbVszwsMfneZ5+B9Q==
 -----END AGE ENCRYPTED FILE-----

users/ai-worker.nix

@@ -11,4 +11,71 @@
     ];
   };
   users.groups.ai-worker = {};
+  
+  # Restricted sudo for ai-worker - security checks only
+  security.sudo.extraRules = [
+    {
+      users = [ "ai-worker" ];
+      commands = [
+        # Firewall checks
+        {
+          command = "/run/wrappers/bin/sudo iptables -L -n -v";
+          options = [ "NOPASSWD" ];
+        }
+        {
+          command = "/run/wrappers/bin/sudo iptables -S";
+          options = [ "NOPASSWD" ];
+        }
+        # Fail2ban status
+        {
+          command = "/run/current-system/sw/bin/fail2ban-client status";
+          options = [ "NOPASSWD" ];
+        }
+        {
+          command = "/run/current-system/sw/bin/fail2ban-client status *";
+          options = [ "NOPASSWD" ];
+        }
+        {
+          command = "/run/current-system/sw/bin/fail2ban-client get * banned";
+          options = [ "NOPASSWD" ];
+        }
+        # Log inspection
+        {
+          command = "/run/current-system/sw/bin/journalctl -t kernel -n 100";
+          options = [ "NOPASSWD" ];
+        }
+        {
+          command = "/run/current-system/sw/bin/journalctl -u fail2ban -n 50";
+          options = [ "NOPASSWD" ];
+        }
+        {
+          command = "/run/current-system/sw/bin/journalctl -u firewall -n 50";
+          options = [ "NOPASSWD" ];
+        }
+        # SSH config verification
+        {
+          command = "/run/current-system/sw/bin/sshd -T";
+          options = [ "NOPASSWD" ];
+        }
+        # Docker service checks
+        {
+          command = "/run/current-system/sw/bin/docker ps";
+          options = [ "NOPASSWD" ];
+        }
+        {
+          command = "/run/current-system/sw/bin/docker inspect *";
+          options = [ "NOPASSWD" ];
+        }
+        # Network diagnostics
+        {
+          command = "/run/current-system/sw/bin/ss -tlnp";
+          options = [ "NOPASSWD" ];
+        }
+        {
+          command = "/run/current-system/sw/bin/cat /proc/net/tcp";
+          options = [ "NOPASSWD" ];
+        }
+      ];
+    }
+  ];
 }