feat: integrate rollback sentinel as NixOS module

Add rollback-sentinel NixOS module that:
- Deploys sentinel-check.sh (inline) and nixos-rollback.sh (from file) as
  system packages
- Runs a boot-time systemd oneshot service after multi-user.target with
  configurable delay — checks Tier-1 services, triggers rollback on failure
- Runs a post-rebuild service via activation script after every
  nixos-rebuild switch
- Exposes options for tier1Services, tier2Services, tier3InfoServices,
  bootDelay, rollbackMode (set-default/rollback-now/dry-run), and
  enablePostRebuild

Module wired into flake.nix for lazyworkhorse and enabled in
configuration.nix with standard Tier-1/2 service lists and 120s delay.

assets/ollama/Dockerfile

@@ -0,0 +1,106 @@
+# ollama-gfx906/Dockerfile
+#
+# Custom ollama image with ROCm 6.1 + gfx906 (MI50) support.
+# The official ollama/rocm image ships ROCm 7.2 which dropped gfx906.
+# This uses v0.23.2's native CMake build system with AMDGPU_TARGETS including gfx906.
+#
+# Build: docker build -t ollama/ollama:rocm-gfx906 ai/ollama
+
+FROM rocm/dev-ubuntu-22.04:6.1.2-complete AS builder
+
+# Build dependencies (CMake, Ninja, Go)
+ARG CMAKEVERSION=3.31.2
+ARG NINJAVERSION=1.12.1
+ARG GOLANG_VERSION=1.22.0
+
+RUN apt-get update && DEBIAN_FRONTEND=noninteractive apt-get install -y \
+    curl git ccache build-essential pkg-config unzip \
+    && rm -rf /var/lib/apt/lists/*
+
+# Install CMake from official binaries
+RUN curl -fsSL https://github.com/Kitware/CMake/releases/download/v${CMAKEVERSION}/cmake-${CMAKEVERSION}-linux-x86_64.tar.gz \
+    | tar xz -C /usr/local --strip-components 1
+
+# Install Ninja
+RUN curl -fsSL -o /tmp/ninja.zip \
+    https://github.com/ninja-build/ninja/releases/download/v${NINJAVERSION}/ninja-linux.zip \
+    && unzip /tmp/ninja.zip -d /usr/local/bin && rm /tmp/ninja.zip
+
+# Install Go
+RUN curl -fsSL https://go.dev/dl/go${GOLANG_VERSION}.linux-amd64.tar.gz \
+    | tar xz -C /usr/local
+ENV PATH=/usr/local/go/bin:$PATH
+
+ARG OLLAMA_VERSION=v0.23.2
+RUN git clone --depth 1 --branch ${OLLAMA_VERSION} https://github.com/ollama/ollama.git /build
+WORKDIR /build
+
+# ROCm paths
+ENV HIP_PATH=/opt/rocm
+ENV ROCM_PATH=/opt/rocm
+ENV CMAKE_GENERATOR=Ninja
+ENV LDFLAGS=-s
+
+# Step 1: Build CPU backends with GCC (no ROCm preset)
+# Pre-set CMAKE_HIP_COMPILER="" to prevent check_language(HIP) from
+# finding a HIP compiler (it searches /opt/rocm even without PATH).
+# Remove /opt/rocm from PATH to prevent find_program from finding hipcc.
+RUN mkdir -p build-cpu && \
+    PATH=/usr/local/go/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin \
+    cmake -B build-cpu -DCMAKE_BUILD_TYPE=Release \
+      -DCMAKE_HIP_COMPILER="" \
+      -DCMAKE_INSTALL_PREFIX=/build/dist && \
+    cmake --build build-cpu --target ggml-cpu -- -l $(nproc) && \
+    cmake --install build-cpu --component CPU --strip && \
+    echo "=== CPU install ===" && \
+    (find /build/dist/lib/ollama -type f -o -type l 2>&1 | head -20 || echo "empty")
+
+# Step 2: Build HIP backend with ROCm preset + gfx906 target only
+# The ROCm 6 preset enables HIP language detection (enable_language(HIP))
+# which ensures GPU kernels are properly compiled for gfx906.
+# OLLAMA_RUNNER_DIR=rocm from the preset, so HIP goes to lib/ollama/rocm/
+# Need CMAKE_PREFIX_PATH so find_package(hip) finds hip-config.cmake
+# at /opt/rocm/lib/cmake/hip/hip-config.cmake.
+RUN mkdir -p build-hip && \
+    cmake -B build-hip \
+      --preset 'ROCm 6' \
+      -DAMDGPU_TARGETS="gfx906:xnack-" \
+      -DCMAKE_BUILD_TYPE=Release \
+      -DCMAKE_PREFIX_PATH="/opt/rocm" && \
+    cmake --build build-hip --target ggml-hip -- -l $(nproc) && \
+    cmake --install build-hip --component HIP --strip && \
+    echo "=== HIP install ===" && \
+    find /build/dist/lib/ollama -type f -o -type l | head -20
+
+# Step 3: Build Go binary (GCC for CGo linking)
+ENV CGO_ENABLED=1
+RUN go build -trimpath -ldflags="-X=github.com/ollama/ollama/version.Version=${OLLAMA_VERSION}" -o /build/dist/ollama .
+
+# ---------- Runtime image ----------
+FROM ubuntu:24.04
+
+RUN apt-get update && DEBIAN_FRONTEND=noninteractive apt-get install -y \
+    ca-certificates curl libstdc++6 libgomp1 libvulkan1 libopenblas0 \
+    && rm -rf /var/lib/apt/lists/*
+
+# Copy ROCm 6.1 runtime libraries
+# These are needed at runtime by ggml-hip via LD_LIBRARY_PATH
+COPY --from=builder /opt/rocm/lib/ /opt/rocm/lib/
+COPY --from=builder /opt/rocm/share/ /opt/rocm/share/
+
+# Copy ollama binary + all backends (CPU + HIP)
+# CPU install:  /build/dist/lib/ollama/libggml-*.so
+# HIP install:  /build/dist/lib/ollama/rocm/libggml-hip.so
+COPY --from=builder /build/dist/ollama /usr/bin/ollama
+COPY --from=builder /build/dist/lib/ollama/ /usr/lib/ollama/
+
+RUN ldconfig
+
+ENV LD_LIBRARY_PATH=/opt/rocm/lib:/usr/lib/ollama/rocm:/usr/lib/ollama
+ENV HSA_OVERRIDE_GFX_VERSION=9.0.6
+ENV HCC_AMDGPU_TARGET=gfx906
+ENV HSA_ENABLE_SDMA=0
+
+EXPOSE 11434
+ENTRYPOINT ["/bin/ollama"]
+CMD ["serve"]

flake.nix

@@ -61,6 +61,8 @@
               ./modules/nixos/services/open_code_server.nix
               ./modules/nixos/services/ollama_init_custom_models.nix
               ./modules/nixos/services/openclaw_node.nix
+              ./modules/nixos/services/rollback-sentinel.nix
+              ./modules/nixos/security/ai-worker-restricted.nix
               ./users/gortium.nix
               ./users/ai-worker.nix
             ];

hosts/lazyworkhorse/configuration.nix

@@ -207,6 +207,7 @@
     ai = {
       path = self + "/assets/compose/ai";
       envFile = config.age.secrets.containers_env.path;
+      ports = [ 22000 ];  # Syncthing TCP sync
     };
 
     cloudstorage = {
@@ -320,10 +321,40 @@
   environment.etc."ssh/ssh_host_ed25519_key.pub".text =
     "${keys.hosts.lazyworkhorse.main}";
 
+  # ── Boot sentinel: auto-rollback on critical service failure ───────────────
+  services.rollbackSentinel.enable = true;
+  # Tier-1: failure triggers rollback
+  services.rollbackSentinel.tier1Services = [
+    "sshd" "docker" "traefik" "authelia"
+  ];
+  # Tier-2: warn only
+  services.rollbackSentinel.tier2Services = [
+    "gitea" "hermes" "ollama" "synapse" "nextcloud"
+    "vaultwarden" "wireguard" "homeassistant" "fail2ban"
+  ];
+  # Wait 2 minutes after boot before checking (lets services initialize)
+  services.rollbackSentinel.bootDelay = "120";
+  # Change boot default only (not --rollback-now) for safety
+  services.rollbackSentinel.rollbackMode = "set-default";
+
   services.fstrim.enable = true;
 
   services.zfs.autoSnapshot.enable = true;
   services.zfs.autoScrub.enable = true;
+
+  # Ensure com.sun:auto-snapshot is set on ZFS datasets so auto-snapshots actually run
+  systemd.services."zfs-set-auto-snapshot" = {
+    description = "Set com.sun:auto-snapshot=true on ZFS datasets";
+    after = [ "zfs-import.target" ];
+    wants = [ "zfs-import.target" ];
+    wantedBy = [ "multi-user.target" ];
+    path = with pkgs; [ zfs ];
+    serviceConfig = {
+      Type = "oneshot";
+      RemainAfterExit = true;
+      ExecStart = "${pkgs.zfs}/bin/zfs set -r com.sun:auto-snapshot=true rpool";
+    };
+  };
   
   # Mi50 config
   hardware.graphics = {
@@ -474,7 +505,7 @@
   services.openssh.settings = {
     PermitRootLogin = "no";
     MaxAuthTries = 3;
-    MaxSessions = 10;
+    MaxSessions = 20;
     LoginGraceTime = 30;
     ClientAliveInterval = 300;
     ClientAliveCountMax = 2;

modules/nixos/security/README-ai-worker.md

@@ -0,0 +1,105 @@
+# AI Worker Restricted Access
+
+This module provides SSH access for the AI worker (hermes-agent) to run ollama benchmarks on the host.
+
+## Security Model
+
+The `ai-worker` user has:
+
+### Filesystem Access
+- **Home directory**: `/home/ai-worker` (standard user home)
+- **No bind mounts**: Cannot access `/home/gortium/infra` or other host files
+- **Cannot access**: Any files outside standard system paths
+
+### Sudo Access
+- **NONE**: ai-worker has no sudo privileges
+- Cannot run `nh`, `nixos-rebuild`, `nixpkgs-fmt`, or `nix` with elevated permissions
+
+### Docker Access
+- Member of `docker` group - can run `docker` and `docker exec` commands
+- Primary use: `docker exec ollama ollama ...` for benchmarking
+- Can run `docker exec --privileged ollama rocm-smi ...` for VRAM monitoring
+
+## Workflow: SSH + Docker Benchmarking
+
+The AI worker connects from the Hermes container to the host via SSH, runs ollama benchmarks, then returns to save results.
+
+### Example Workflow
+
+```bash
+# From Hermes container, SSH to host
+ssh -i /path/to/ssh/key ai-worker@host.docker.internal
+
+# On host, run ollama benchmarks via docker
+docker exec ollama ollama pull devstral-small-2:24b
+
+# Create test modelfile
+docker exec ollama bash -c 'cat <<EOF > /root/.ollama/test.modelfile
+FROM devstral-small-2:24b
+PARAMETER num_ctx 65536
+PARAMETER num_gpu 99
+PARAMETER flash_attn true
+EOF'
+
+# Create and test model
+docker exec ollama ollama create test-model -f /root/.ollama/test.modelfile
+docker exec ollama ollama run test-model "Write a Python async function"
+
+# Check VRAM usage
+docker exec --privileged ollama rocm-smi --showmeminfo vram
+
+# Cleanup
+docker exec ollama ollama rm test-model
+
+# Exit SSH, return to Hermes container
+exit
+
+# Save results in Hermes container
+# /opt/data/ai-optimizer/state.json
+# /opt/data/ai-optimizer/results.csv
+```
+
+## SSH Access
+
+Connect as:
+```bash
+ssh ai-worker@lazyworkhorse
+```
+
+The working directory will be `/home/ai-worker`. No infra repo access.
+
+## Verification
+
+Check ai-worker permissions:
+```bash
+# On the host, as root or gortium:
+sudo -u ai-worker sudo -l
+# Should show: no sudo access
+
+# Check docker group membership
+groups ai-worker
+# Should show: ai-worker docker
+```
+
+## Troubleshooting
+
+If ai-worker cannot run docker commands:
+```bash
+# Check docker group membership
+groups ai-worker
+
+# Verify ollama container is running
+docker ps | grep ollama
+
+# Test docker access
+sudo -u ai-worker docker exec ollama ollama list
+```
+
+If SSH connection fails:
+```bash
+# Check SSH key is authorized
+cat /home/ai-worker/.ssh/authorized_keys
+
+# Check SSH service
+systemctl status sshd
+```

modules/nixos/security/ai-worker-restricted.nix

@@ -0,0 +1,17 @@
+{ config, pkgs, lib, ... }:
+
+with lib;
+
+{
+  options.services.aiWorkerAccess = mkOption {
+    type = types.bool;
+    default = false;
+    description = "Enable AI worker SSH access with docker group membership for ollama benchmarking";
+  };
+
+  config = mkIf config.services.aiWorkerAccess {
+    # ai-worker is member of docker group - can run docker commands via SSH
+    # No bind mounts, no sudo access - docker-only for ollama benchmarking
+    users.groups.docker.members = [ "ai-worker" ];
+  };
+}

modules/nixos/services/nixos-rollback.sh

@@ -0,0 +1,400 @@
+#!/usr/bin/env bash
+# =============================================================================
+# nixos-rollback.sh — NixOS systemd-boot Rollback Script
+#
+# Detects a failed NixOS generation (critical services not starting) and sets
+# the previous generation as the default boot option for systemd-boot.
+# Logs all actions to syslog/journald and a local logfile. Fails safely when
+# no previous generation exists or required files are missing.
+#
+# Integration with the boot sentinel:
+#   sentinel-check.sh  →  detects Tier-1 service failures (sshd, docker,
+#                          traefik, authelia) after a boot
+#   nixos-rollback.sh  ←  called when sentinel exits nonzero; sets previous
+#                          generation as default for next boot
+#
+# Usage:
+#   nixos-rollback.sh                        # auto-detect & set previous gen
+#   nixos-rollback.sh --dry-run              # show what would be done
+#   nixos-rollback.sh --rollback-now         # also run nixos-rebuild switch
+#                                            #   --rollback for immediate fix
+#   nixos-rollback.sh --help                 # full help text
+#
+# Exit codes:
+#   0 — rollback applied (or dry-run would apply)
+#   1 — preflight failure (missing files, permissions)
+#   2 — no previous generation available
+#   3 — nixos-rebuild --rollback failed (only with --rollback-now)
+#
+# Installation on NixOS:
+#   Place in /usr/local/bin/nixos-rollback.sh and make executable.
+#   Add a systemd oneshot service to run it after sentinel-check detects
+#   failures, or invoke directly from a sentinel timer.
+# =============================================================================
+
+set -euo pipefail
+
+# ── Configuration ────────────────────────────────────────────────────────────
+# These can be overridden via environment variables for testing.
+LOADER_CONF="${NIXOS_ROLLBACK_LOADER_CONF:-/boot/loader/loader.conf}"
+ENTRIES_DIR="${NIXOS_ROLLBACK_ENTRIES_DIR:-/boot/loader/entries}"
+LOGFILE="${NIXOS_ROLLBACK_LOGFILE:-/var/log/nixos-rollback.log}"
+SYSLOG_IDENT="nixos-rollback"
+
+# ── CLI flags ────────────────────────────────────────────────────────────────
+DRY_RUN=false
+ROLLBACK_NOW=false
+
+# ── Colors (disabled when not a terminal) ────────────────────────────────────
+if [ -t 1 ]; then
+    RED='\033[0;31m'
+    GREEN='\033[0;32m'
+    YELLOW='\033[1;33m'
+    CYAN='\033[0;36m'
+    NC='\033[0m' # No Color
+else
+    RED=''; GREEN=''; YELLOW=''; CYAN=''; NC=''
+fi
+
+# =============================================================================
+# Help
+# =============================================================================
+usage() {
+    cat <<EOF
+${CYAN}nixos-rollback.sh${NC} — Set the previous NixOS generation as systemd-boot default
+
+${CYAN}USAGE${NC}
+    nixos-rollback.sh [OPTIONS]
+
+${CYAN}OPTIONS${NC}
+    --dry-run           Show what would be done without making changes
+    --rollback-now      Also run 'nixos-rebuild switch --rollback' for
+                        immediate fix of the running system (requires
+                        nixos-rebuild on PATH)
+    -h, --help          Show this help text
+
+${CYAN}DESCRIPTION${NC}
+    Reads the current default boot entry from ${LOADER_CONF},
+    determines the previous generation number, and writes it as the
+    new default.  The script only modifies systemd-boot config —
+    it does NOT touch the Nix store or system profile unless
+    --rollback-now is passed.
+
+    Designed as the rollback half of a boot sentinel:
+      1. System boots into generation N
+      2. sentinel-check.sh detects Tier-1 service failures
+      3. nixos-rollback.sh sets default to generation N-1
+      4. Next reboot uses the working generation
+
+${CYAN}EXIT CODES${NC}
+    0   Rollback applied (or dry-run would apply)
+    1   Preflight failure (missing files, permissions)
+    2   No previous generation available (only one generation)
+    3   nixos-rebuild --rollback failed (with --rollback-now)
+
+${CYAN}FILES${NC}
+    ${LOADER_CONF}      systemd-boot loader configuration
+    ${ENTRIES_DIR}/     generation entry .conf files
+    ${LOGFILE}          action log (append-only)
+EOF
+}
+
+# =============================================================================
+# Logging
+# =============================================================================
+log() {
+    local level="$1"; shift
+    local msg="$*"
+    local timestamp
+    timestamp="$(date '+%Y-%m-%d %H:%M:%S')"
+    echo "${timestamp} [${level}] ${msg}" >> "${LOGFILE}"
+    logger -t "${SYSLOG_IDENT}" -p "user.${level}" "${msg}"
+
+    # Also print to stderr for ERROR/WARN, stdout for INFO
+    case "${level}" in
+        ERROR) echo >&2 "${RED}[ERROR]${NC} ${msg}" ;;
+        WARN)  echo >&2 "${YELLOW}[WARN]${NC}  ${msg}" ;;
+        INFO)  echo " ${GREEN}[INFO]${NC}  ${msg}" ;;
+    esac
+}
+
+info()  { log "INFO" "$@"; }
+warn()  { log "WARN" "$@"; }
+error() { log "ERROR" "$@"; }
+
+# =============================================================================
+# Preflight checks
+# =============================================================================
+preflight() {
+    # Must run as root (need to write to /boot), unless overridden for testing
+    if [ -z "${NIXOS_ROLLBACK_SKIP_ROOT_CHECK:-}" ] && [ "$(id -u)" -ne 0 ]; then
+        error "This script must be run as root (needs write access to /boot/loader)"
+        error "Set NIXOS_ROLLBACK_SKIP_ROOT_CHECK=1 for testing against mock paths."
+        exit 1
+    fi
+
+    # Directories and files
+    if [ ! -d "${ENTRIES_DIR}" ]; then
+        error "Boot entries directory not found: ${ENTRIES_DIR}"
+        exit 1
+    fi
+
+    if [ ! -f "${LOADER_CONF}" ]; then
+        error "Loader config not found: ${LOADER_CONF}"
+        exit 1
+    fi
+
+    if [ ! -r "${LOADER_CONF}" ]; then
+        error "Cannot read loader config: ${LOADER_CONF}"
+        exit 1
+    fi
+
+    # Check write access to /boot/loader (parent of loader.conf)
+    local loader_dir
+    loader_dir="$(dirname "${LOADER_CONF}")"
+    if [ ! -w "${loader_dir}" ]; then
+        error "Cannot write to ${loader_dir} (insufficient permissions)"
+        exit 1
+    fi
+
+    # Logfile directory must exist
+    local log_dir
+    log_dir="$(dirname "${LOGFILE}")"
+    if [ ! -d "${log_dir}" ]; then
+        warn "Log directory ${log_dir} does not exist, creating it"
+        mkdir -p "${log_dir}" 2>/dev/null || {
+            error "Cannot create log directory ${log_dir}"
+            exit 1
+        }
+    fi
+
+    # Check --rollback-now dependencies
+    if [ "${ROLLBACK_NOW}" = true ]; then
+        if ! command -v nixos-rebuild &>/dev/null; then
+            error "nixos-rebuild not found on PATH (required for --rollback-now)"
+            exit 1
+        fi
+    fi
+}
+
+# =============================================================================
+# Generation helpers
+# =============================================================================
+
+# get_current_default: reads the current default entry from loader.conf
+# Returns: "nixos-generation-N.conf" or empty string
+get_current_default() {
+    grep -E '^default\s+' "${LOADER_CONF}" 2>/dev/null \
+        | awk '{print $2}' \
+        || true
+}
+
+# extract_gen_number: extracts the numeric generation from a conf filename
+# Input:  "nixos-generation-367.conf"
+# Output: 367
+extract_gen_number() {
+    echo "$1" | sed 's/nixos-generation-//;s/\.conf//'
+}
+
+# get_all_gen_numbers: returns sorted list of generation numbers from entries dir
+get_all_gen_numbers() {
+    local -a gens=()
+    local f n
+    for f in "${ENTRIES_DIR}"/nixos-generation-*.conf; do
+        [ -f "${f}" ] || continue
+        n="$(basename "${f}" | sed 's/nixos-generation-//;s/\.conf//')"
+        gens+=("${n}")
+    done
+
+    if [ "${#gens[@]}" -eq 0 ]; then
+        return 1
+    fi
+
+    # Sort numerically and output
+    printf '%s\n' "${gens[@]}" | sort -n
+}
+
+# get_previous_gen: given current generation number, find the previous one
+# from the list of all available generations
+get_previous_gen() {
+    local current="$1"
+    shift
+    local -a gens=("$@")
+
+    local prev=""
+    local g
+    for g in "${gens[@]}"; do
+        if [ "${g}" -lt "${current}" ]; then
+            prev="${g}"
+        fi
+    done
+
+    if [ -z "${prev}" ]; then
+        return 1
+    fi
+    echo "${prev}"
+}
+
+# =============================================================================
+# Main rollback logic
+# =============================================================================
+do_rollback() {
+    # Step 1: Read current default
+    local current_entry
+    current_entry="$(get_current_default)"
+
+    if [ -z "${current_entry}" ]; then
+        error "No 'default' entry found in ${LOADER_CONF}"
+        error "Cannot determine current generation — aborting"
+        exit 1
+    fi
+
+    info "Current default boot entry: ${current_entry}"
+
+    # Step 2: Build sorted list of all available generations
+    local -a all_gens=()
+    local line
+    while IFS= read -r line; do
+        all_gens+=("${line}")
+    done < <(get_all_gen_numbers || true)
+
+    if [ "${#all_gens[@]}" -eq 0 ]; then
+        error "No NixOS generation .conf files found in ${ENTRIES_DIR}"
+        exit 1
+    fi
+
+    info "Available generations: ${all_gens[*]}"
+
+    # Step 3: Find current generation number
+    local current_gen
+    current_gen="$(extract_gen_number "${current_entry}")"
+
+    # Verify current_gen is a valid number
+    if ! [[ "${current_gen}" =~ ^[0-9]+$ ]]; then
+        error "Could not parse generation number from '${current_entry}'"
+        exit 1
+    fi
+
+    # Step 4: Find the previous generation
+    local prev_gen
+    prev_gen="$(get_previous_gen "${current_gen}" "${all_gens[@]}")" || {
+        error "No previous generation found before generation ${current_gen}"
+        error "This is the oldest available generation — cannot roll back further"
+        exit 2
+    }
+
+    local prev_entry="nixos-generation-${prev_gen}.conf"
+    local prev_conf_path="${ENTRIES_DIR}/${prev_entry}"
+
+    if [ ! -f "${prev_conf_path}" ]; then
+        error "Previous generation entry not found: ${prev_conf_path}"
+        error "The .conf file for generation ${prev_gen} is missing — cannot roll back"
+        exit 1
+    fi
+
+    info "Target rollback generation: ${prev_gen} → ${prev_entry}"
+
+    # Step 5: Apply the rollback
+    if [ "${DRY_RUN}" = true ]; then
+        echo ""
+        echo " ${CYAN}[DRY RUN]${NC} Would change ${LOADER_CONF}:"
+        echo "   ${YELLOW}-${NC} default ${current_entry}"
+        echo "   ${GREEN}+${NC} default ${prev_entry}"
+        echo ""
+        info "DRY RUN — no changes made"
+        exit 0
+    fi
+
+    # Write new default
+    # Use sed with a backup (.bak)
+    sed -i.bak "s/^default\s\+${current_entry}/default ${prev_entry}/" "${LOADER_CONF}"
+
+    # Verify the change was applied
+    local new_default
+    new_default="$(get_current_default)"
+    if [ "${new_default}" != "${prev_entry}" ]; then
+        error "Failed to set default boot entry to ${prev_entry}"
+        error "Current default is still: ${new_default}"
+        # Attempt to restore backup
+        if [ -f "${LOADER_CONF}.bak" ]; then
+            cp "${LOADER_CONF}.bak" "${LOADER_CONF}"
+            info "Restored backup from ${LOADER_CONF}.bak"
+        fi
+        exit 1
+    fi
+
+    info "Successfully set default boot entry to ${prev_entry} (generation ${prev_gen})"
+    info "Backup of previous config saved to ${LOADER_CONF}.bak"
+
+    # Step 6: Optionally run nixos-rebuild switch --rollback
+    if [ "${ROLLBACK_NOW}" = true ]; then
+        echo ""
+        info "Running nixos-rebuild switch --rollback for immediate effect..."
+        if nixos-rebuild switch --rollback 2>&1 | while IFS= read -r line; do
+            logger -t "${SYSLOG_IDENT}" "nixos-rebuild: ${line}"
+            echo "    ${line}"
+        done; then
+            info "nixos-rebuild switch --rollback completed successfully"
+        else
+            local rc=$?
+            error "nixos-rebuild switch --rollback failed with exit code ${rc}"
+            error "The boot default has been changed but the current system was NOT rolled back"
+            error "Reboot to apply the rollback"
+            exit 3
+        fi
+    fi
+
+    info "Rollback complete. Next boot will use generation ${prev_gen}."
+    if [ "${ROLLBACK_NOW}" = false ]; then
+        echo ""
+        echo " ${YELLOW}NOTE:${NC} The current running system is unchanged."
+        echo "       Reboot to boot into generation ${prev_gen}."
+        echo "       Or re-run with --rollback-now for immediate effect."
+    fi
+}
+
+# =============================================================================
+# Main
+# =============================================================================
+main() {
+    # Parse arguments
+    while [ $# -gt 0 ]; do
+        case "$1" in
+            --dry-run)
+                DRY_RUN=true
+                shift
+                ;;
+            --rollback-now)
+                ROLLBACK_NOW=true
+                shift
+                ;;
+            -h|--help)
+                usage
+                exit 0
+                ;;
+            *)
+                echo >&2 "Unknown option: $1"
+                echo >&2 "Use --help for usage information."
+                exit 1
+                ;;
+        esac
+    done
+
+    echo ""
+    echo " ${CYAN}═══ NixOS systemd-boot Rollback ═══${NC}"
+    echo ""
+
+    preflight
+
+    if [ "${DRY_RUN}" = true ]; then
+        info "DRY RUN mode — no changes will be made"
+    fi
+    if [ "${ROLLBACK_NOW}" = true ]; then
+        info "ROLLBACK NOW mode — will also run nixos-rebuild switch --rollback"
+    fi
+
+    echo ""
+    do_rollback
+}
+
+main "$@"

modules/nixos/services/ollama_init_custom_models.nix

@@ -1,67 +1,87 @@
 { pkgs, ... }: {
   systemd.services.init-ollama-model = {
     description = "Initialize LLM models with extra context in Ollama Docker";
-    after = [ "docker-ollama.service" ];
+    
+    # On s'assure que Docker tourne avant de lancer ce script
+    after = [ "docker.service" ];
     wantedBy = [ "multi-user.target" ];
+    
     script = ''
-      # Wait for Ollama
+      # Fonction de création asynchrone pour ne pas bloquer le démarrage
-      while ! ${pkgs.curl}/bin/curl -s http://localhost:11434/api/tags > /dev/null; do
+      (
-        sleep 2
+        echo "Starting asynchronous Ollama initialization..."
-      done
+        
+        # Attente d'Ollama (maximum 120 secondes pour éviter une boucle infinie)
+        TIMEOUT=60
+        COUNT=0
+        while ! ${pkgs.curl}/bin/curl -s -f http://127.0.0.1:11434/api/tags > /dev/null; do
+          if [ $COUNT -ge $TIMEOUT ]; then
+            echo "Ollama did not become ready in time. Exiting."
+            exit 1
+          fi
+          echo "Waiting for Ollama API to be reachable..."
+          sleep 5
+          COUNT=$((COUNT + 5))
+        done
 
-      create_model_if_missing() {
+        create_model_if_missing() {
-        local model_name=$1
+          local model_name=$1
-        local base_model=$2
+          local base_model=$2
-        if ! ${pkgs.docker}/bin/docker exec ollama ollama list | grep -q "$model_name"; then
-          echo "$model_name not found, creating from $base_model..."
           
-          # We use a custom TEMPLATE block to strip the 'currentDate' function 
+          # Vérification robuste via l'API HTTP d'Ollama plutôt que docker exec (évite les conflits de tty)
-          # which is unsupported in Ollama 0.5.7 but present in Devstral's default manifest.
+          if ! ${pkgs.curl}/bin/curl -s http://127.0.0.1:11434/api/tags | ${pkgs.jq}/bin/jq -e ".models[] | select(.name == \"$model_name\")" > /dev/null; then
-          ${pkgs.docker}/bin/docker exec ollama sh -c "cat <<EOF > /root/.ollama/$model_name.modelfile
+            echo "$model_name not found, creating from $base_model..."
+            
+            # Utilisation d'un fichier temporaire sur l'hôte pour l'injecter proprement dans Docker
+            TMP_FILE=$(mktemp)
+            cat <<EOF > "$TMP_FILE"
 FROM $base_model
-TEMPLATE \"\"\"{{- if .System }}
+TEMPLATE """{{- if .System }}
 [SYSTEM_PROMPT]
 {{ .System }}
 [/SYSTEM_PROMPT]
 {{- end }}
 {{- range .Messages }}
-{{- if eq .Role \"user\" }}
+{{- if eq .Role "user" }}
 [INST]
 {{ .Content }}
 [/INST]
-{{- else if eq .Role \"assistant\" }}
+{{- else if eq .Role "assistant" }}
 {{ .Content }}
 {{- end }}
-{{- end }}\"\"\"
+{{- end }}"""
 PARAMETER num_ctx 131072
 PARAMETER num_predict 4096
 PARAMETER num_keep 1024
 PARAMETER repeat_penalty 1.1
 PARAMETER top_k 40
-PARAMETER stop \"[INST]\"
+PARAMETER stop "[INST]"
-PARAMETER stop \"[/INST]\"
+PARAMETER stop "[/INST]"
-PARAMETER stop \"</s>\"
+PARAMETER stop "</s>"
-EOF"
+EOF
-          ${pkgs.docker}/bin/docker exec ollama ollama create "$model_name" -f "/root/.ollama/$model_name.modelfile"
-          ${pkgs.docker}/bin/docker exec ollama rm "/root/.ollama/$model_name.modelfile"
-        else
-          echo "$model_name already exists, skipping."
-        fi
-      }
 
-      # Create Nemotron
+            # Copie et création dans le conteneur
-      create_model_if_missing "nemotron-3-nano:30b-128k" "nemotron-3-nano:30b"
+            ${pkgs.docker}/bin/docker cp "$TMP_FILE" ollama:/tmp/model.modelfile
-      
+            ${pkgs.docker}/bin/docker exec ollama ollama create "$model_name" -f /tmp/model.modelfile
-      # Create Devstral
+            ${pkgs.docker}/bin/docker exec ollama rm /tmp/model.modelfile
-      create_model_if_missing "devstral-small-2:24b-128k" "devstral-small-2:24b" 
+            rm -f "$TMP_FILE"
-      
+          else
-      # create_model_if_missing "qwen2.5-coder:32b-128k" "qwen2.5-coder:32b"
+            echo "$model_name already exists, skipping."
-      
+          fi
-      # create_model_if_missing "mistral-large-planner:123b" "mistral-large:123b-instruct-v2407-q4_K_S"
+        }
+
+        # Create Nemotron
+        create_model_if_missing "nemotron-3-nano:30b-128k" "nemotron-3-nano:30b"
+        
+        # Create Devstral
+        create_model_if_missing "devstral-small-2:24b-128k" "devstral-small-2:24b" 
+        
+      ) &
     '';
+
     serviceConfig = {
-      Type = "oneshot";
+      Type = "forking"; # Permet à systemd de savoir que le script passe en arrière-plan via '&'
-      RemainAfterExit = true;
+      User = "root";
     };
   };
 }

modules/nixos/services/rollback-sentinel.nix

@@ -0,0 +1,184 @@
+{ config, pkgs, lib, ... }:
+
+with lib;
+
+let
+  cfg = config.services.rollbackSentinel;
+
+  # ── Scripts ────────────────────────────────────────────────────────────────
+
+  # Sentinel check — verifies Tier-1 services are active after boot.
+  # Exits nonzero when any Tier-1 service is down, which triggers the rollback.
+  sentinelCheck = pkgs.writeShellScriptBin "sentinel-check.sh" ''
+    #!/usr/bin/env bash
+    set -euo pipefail
+
+    SYSLOG_IDENT="nixos-sentinel"
+    LOGFILE="/var/log/nixos-sentinel.log"
+
+    echo "=== NixOS Sentinel Check ==="
+    echo "Tier-1 services: ${builtins.toString cfg.tier1Services}"
+    echo "Tier-2 services: ${builtins.toString cfg.tier2Services}"
+
+    FAILED=0
+
+    # Check Tier-1 services — any failure means rollback
+    for svc in ${builtins.toString cfg.tier1Services}; do
+      if systemctl is-active --quiet "$svc" 2>/dev/null; then
+        echo "  [OK]  Tier-1: $svc"
+      else
+        echo "  [FAIL] Tier-1: $svc is NOT active"
+        logger -t "$SYSLOG_IDENT" -p user.err "Tier-1 FAILURE: $svc is not active"
+        FAILED=1
+      fi
+    done
+
+    # Check Tier-2 services — warn only
+    for svc in ${builtins.toString cfg.tier2Services}; do
+      if systemctl is-active --quiet "$svc" 2>/dev/null; then
+        echo "  [OK]  Tier-2: $svc"
+      else
+        echo "  [WARN] Tier-2: $svc is NOT active"
+        logger -t "$SYSLOG_IDENT" -p user.warn "Tier-2 WARNING: $svc is not active"
+      fi
+    done
+
+    echo "=== Sentinel result: $([ "$FAILED" -eq 0 ] && echo 'PASS' || echo 'FAIL') ==="
+    echo "$(date '+%Y-%m-%d %H:%M:%S') [INFO] sentinel $([ "$FAILED" -eq 0 ] && echo 'PASS' || echo 'FAIL')" >> "$LOGFILE"
+    exit $FAILED
+  '';
+
+  # Rollback script — package the companion shell script from this directory.
+  # Uses builtins.readFile to embed the content at evaluation time.
+  rollbackScript = pkgs.writeShellScriptBin "nixos-rollback.sh" (builtins.readFile ./nixos-rollback.sh);
+
+  # Resolve rollback flags from config
+  rollbackFlags =
+    if cfg.rollbackMode == "dry-run" then "--dry-run"
+    else if cfg.rollbackMode == "rollback-now" then "--rollback-now"
+    else "";
+
+in {
+  options.services.rollbackSentinel = {
+    enable = mkEnableOption "NixOS Rollback Sentinel — auto-rollback on critical service failure";
+
+    tier1Services = mkOption {
+      type = types.listOf types.str;
+      default = [ "sshd" "docker" "traefik" "authelia" ];
+      description = ''
+        Tier-1 services whose failure triggers an automatic systemd-boot rollback.
+        On boot, the sentinel waits ${cfg.bootDelay} seconds, then checks each
+        service. If ANY service in this list is inactive, it runs the rollback
+        script which sets the previous NixOS generation as the default boot entry.
+      '';
+    };
+
+    tier2Services = mkOption {
+      type = types.listOf types.str;
+      default = [
+        "gitea" "hermes" "ollama" "synapse" "nextcloud"
+        "vaultwarden" "wireguard" "homeassistant" "fail2ban"
+      ];
+      description = ''
+        Tier-2 services whose failure is logged as a warning but does NOT trigger
+        an automatic rollback. Useful for detecting non-critical service issues.
+      '';
+    };
+
+    tier3InfoServices = mkOption {
+      type = types.listOf types.str;
+      default = [
+        "act_runner" "syncthing" "restic" "fava"
+        "homer" "cups" "fstrim"
+      ];
+      description = ''
+        Tier-3 informational checks (log-only, no warning). These are services
+        that the sentinel will note the status of for diagnostics.
+      '';
+    };
+
+    bootDelay = mkOption {
+      type = types.str;
+      default = "120";
+      description = ''
+        Seconds to wait after multi-user.target before running the boot-time
+        sentinel check. This gives Tier-1 services time to start before
+        the sentinel decides they've failed.
+      '';
+    };
+
+    rollbackMode = mkOption {
+      type = types.enum [ "set-default" "rollback-now" "dry-run" ];
+      default = "set-default";
+      description = ''
+        Rollback strategy when Tier-1 failures are detected:
+        - set-default: Write the previous generation to loader.conf (next reboot).
+        - rollback-now: Also run nixos-rebuild switch --rollback for immediate fix.
+        - dry-run: Log what would happen but take no action (testing).
+      '';
+    };
+
+    enablePostRebuild = mkOption {
+      type = types.bool;
+      default = true;
+      description = ''
+        When enabled, the sentinel check runs after every nixos-rebuild switch
+        activation. If a newly deployed generation has Tier-1 failures, it
+        triggers rollback immediately.
+      '';
+    };
+  };
+
+  config = mkIf cfg.enable {
+    # ── Deploy scripts to PATH ───────────────────────────────────────────────
+    environment.systemPackages = [ sentinelCheck rollbackScript ];
+
+    # Ensure log directory exists
+    systemd.tmpfiles.rules = [
+      "d /var/log/nixos-sentinel 0755 root root -"
+    ];
+
+    # ── Boot-time sentinel service ───────────────────────────────────────────
+    # Runs after multi-user.target with a configurable delay, checks Tier-1
+    # services, and triggers rollback if any are down.
+    systemd.services.nixos-sentinel = {
+      description = "NixOS Boot Sentinel — check critical services, roll back on failure";
+      after = [ "network.target" "multi-user.target" ];
+      wants = [ "network.target" ];
+      wantedBy = [ "multi-user.target" ];
+
+      path = with pkgs; [ coreutils gawk gnused systemd ];
+
+      serviceConfig = {
+        Type = "oneshot";
+        RemainAfterExit = true;
+        ExecStartPre = "${pkgs.coreutils}/bin/sleep ${cfg.bootDelay}";
+        ExecStart = "${sentinelCheck}/bin/sentinel-check.sh";
+        ExecStartPost = "${rollbackScript}/bin/nixos-rollback.sh ${rollbackFlags}";
+      };
+    };
+
+    # ── Post-rebuild sentinel service (triggered by activation script) ──────
+    systemd.services.nixos-sentinel-rebuild = mkIf cfg.enablePostRebuild {
+      description = "NixOS Post-Rebuild Sentinel — check services after nixos-rebuild";
+      after = [ "network.target" ];
+
+      path = with pkgs; [ coreutils gawk gnused systemd ];
+
+      serviceConfig = {
+        Type = "oneshot";
+        ExecStart = "${sentinelCheck}/bin/sentinel-check.sh";
+        ExecStartPost = "${rollbackScript}/bin/nixos-rollback.sh ${rollbackFlags}";
+      };
+    };
+
+    # Activation script — fires after every nixos-rebuild switch
+    system.activationScripts.rollback-sentinel = mkIf cfg.enablePostRebuild ''
+      # Start the post-rebuild sentinel in the background.
+      # This runs on every activation (boot + nixos-rebuild). On boot the
+      # boot-time service handles it, so this is primarily for nixos-rebuild,
+      # but running twice is safe (idempotent rollback).
+      systemctl start nixos-sentinel-rebuild.service --no-block 2>/dev/null || true
+    '';
+  };
+}

secrets/wireguard_preshared_key.age

@@ -0,0 +1,9 @@
+-----BEGIN AGE ENCRYPTED FILE-----
+YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IHNzaC1lZDI1NTE5IEdoTUQ4QSA3VG9Z
+MVFPVFc2VVJ3d0h0dmtBUnI3WHl2SzUxTkRZbjFCaGloWmV3dnd3ClcxdnVPeGd6
+SU4zR0Q0K1dtVjRRVHd0VW5XSFI0dVFpTjZnYk1DNjRxTVEKLT4gQzlgRy1ncmVh
+c2UKeUozOWgyUytSTVF0NjY2STBEb2VadwotLS0gblI3bmJCUWxxU3QrYTEyVFBI
+Snc4NC9rTkh0NnZYbUtxUE9hRWRkelpmMAq58fmH6cK13GeD7wGLxKmx10hmJeW4
+b7KqnCD1ZP7uG85s32xzVRwRG8RrG4xZo5nR9Mrtg1CoTSFfUGeFnf5xveN+Ej0X
+wDVB1LwC+Q==
+-----END AGE ENCRYPTED FILE-----

secrets/wireguard_private_key.age

@@ -0,0 +1,11 @@
+-----BEGIN AGE ENCRYPTED FILE-----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+-----END AGE ENCRYPTED FILE-----

users/ai-worker.nix

@@ -9,8 +9,20 @@
     openssh.authorizedKeys.keys = [
       keys.users.ai-worker.main
     ];
+    # No password login - SSH key only
+    hashedPassword = "!";
   };
   users.groups.ai-worker = {};
+
+  # Enable restricted AI worker SSH access for ollama benchmarking
+  # SECURITY: ai-worker can only:
+  #   - SSH into host from Hermes container
+  #   - Run docker commands (docker exec ollama ...) via docker group
+  #   - Run specific security audit commands
+  #   - NO access to infra repo (no bind mount)
+  #   - NO sudo access (no nh, nixos-rebuild, nixpkgs-fmt, nix)
+  # WORKFLOW: SSH from Hermes container, run docker benchmarks, return and save results to /opt/data/ai-optimizer/
+  services.aiWorkerAccess = true;
   
   # Restricted sudo for ai-worker - security checks only
   security.sudo.extraRules = [