fix: remove gpsbabel for aarch64 cross-compile (qmake can't find g++)

uConsole: remove wsjtx + fldigi (qtbase/Qt5 linker fails) — add to removal comment
uConsole: remove accidental .bak file from tracking
2026-06-20 11:56:31 -04:00 · 2026-06-19 22:38:08 -04:00 · 2026-06-19 22:22:16 -04:00 · 2026-06-19 22:22:13 -04:00 · 2026-06-19 22:14:46 -04:00 · 2026-06-19 22:13:18 -04:00
25 changed files with 1829 additions and 329 deletions
--- a/.gitmodules
+++ b/.gitmodules
@@ -1,3 +1,7 @@
 [submodule "assets/compose"]
 	path = assets/compose
 	url = ssh://git@code.lazyworkhorse.net:2222/gortium/compose.git
+[submodule "assets/dotfiles"]
+	path = assets/dotfiles
+	url = ssh://git@code.lazyworkhorse.net:2222/gortium/dotfiles.git
+	branch = master
--- a/assets/compose
+++ b/assets/compose
--- a/assets/dotfiles
+++ b/assets/dotfiles
--- a/assets/ollama/Dockerfile
+++ b/assets/ollama/Dockerfile
@@ -1,106 +0,0 @@
-# ollama-gfx906/Dockerfile
-#
-# Custom ollama image with ROCm 6.1 + gfx906 (MI50) support.
-# The official ollama/rocm image ships ROCm 7.2 which dropped gfx906.
-# This uses v0.23.2's native CMake build system with AMDGPU_TARGETS including gfx906.
-#
-# Build: docker build -t ollama/ollama:rocm-gfx906 ai/ollama
-
-FROM rocm/dev-ubuntu-22.04:6.1.2-complete AS builder
-
-# Build dependencies (CMake, Ninja, Go)
-ARG CMAKEVERSION=3.31.2
-ARG NINJAVERSION=1.12.1
-ARG GOLANG_VERSION=1.22.0
-
-RUN apt-get update && DEBIAN_FRONTEND=noninteractive apt-get install -y \
-    curl git ccache build-essential pkg-config unzip \
-    && rm -rf /var/lib/apt/lists/*
-
-# Install CMake from official binaries
-RUN curl -fsSL https://github.com/Kitware/CMake/releases/download/v${CMAKEVERSION}/cmake-${CMAKEVERSION}-linux-x86_64.tar.gz \
-    | tar xz -C /usr/local --strip-components 1
-
-# Install Ninja
-RUN curl -fsSL -o /tmp/ninja.zip \
-    https://github.com/ninja-build/ninja/releases/download/v${NINJAVERSION}/ninja-linux.zip \
-    && unzip /tmp/ninja.zip -d /usr/local/bin && rm /tmp/ninja.zip
-
-# Install Go
-RUN curl -fsSL https://go.dev/dl/go${GOLANG_VERSION}.linux-amd64.tar.gz \
-    | tar xz -C /usr/local
-ENV PATH=/usr/local/go/bin:$PATH
-
-ARG OLLAMA_VERSION=v0.23.2
-RUN git clone --depth 1 --branch ${OLLAMA_VERSION} https://github.com/ollama/ollama.git /build
-WORKDIR /build
-
-# ROCm paths
-ENV HIP_PATH=/opt/rocm
-ENV ROCM_PATH=/opt/rocm
-ENV CMAKE_GENERATOR=Ninja
-ENV LDFLAGS=-s
-
-# Step 1: Build CPU backends with GCC (no ROCm preset)
-# Pre-set CMAKE_HIP_COMPILER="" to prevent check_language(HIP) from
-# finding a HIP compiler (it searches /opt/rocm even without PATH).
-# Remove /opt/rocm from PATH to prevent find_program from finding hipcc.
-RUN mkdir -p build-cpu && \
-    PATH=/usr/local/go/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin \
-    cmake -B build-cpu -DCMAKE_BUILD_TYPE=Release \
-      -DCMAKE_HIP_COMPILER="" \
-      -DCMAKE_INSTALL_PREFIX=/build/dist && \
-    cmake --build build-cpu --target ggml-cpu -- -l $(nproc) && \
-    cmake --install build-cpu --component CPU --strip && \
-    echo "=== CPU install ===" && \
-    (find /build/dist/lib/ollama -type f -o -type l 2>&1 | head -20 || echo "empty")
-
-# Step 2: Build HIP backend with ROCm preset + gfx906 target only
-# The ROCm 6 preset enables HIP language detection (enable_language(HIP))
-# which ensures GPU kernels are properly compiled for gfx906.
-# OLLAMA_RUNNER_DIR=rocm from the preset, so HIP goes to lib/ollama/rocm/
-# Need CMAKE_PREFIX_PATH so find_package(hip) finds hip-config.cmake
-# at /opt/rocm/lib/cmake/hip/hip-config.cmake.
-RUN mkdir -p build-hip && \
-    cmake -B build-hip \
-      --preset 'ROCm 6' \
-      -DAMDGPU_TARGETS="gfx906:xnack-" \
-      -DCMAKE_BUILD_TYPE=Release \
-      -DCMAKE_PREFIX_PATH="/opt/rocm" && \
-    cmake --build build-hip --target ggml-hip -- -l $(nproc) && \
-    cmake --install build-hip --component HIP --strip && \
-    echo "=== HIP install ===" && \
-    find /build/dist/lib/ollama -type f -o -type l | head -20
-
-# Step 3: Build Go binary (GCC for CGo linking)
-ENV CGO_ENABLED=1
-RUN go build -trimpath -ldflags="-X=github.com/ollama/ollama/version.Version=${OLLAMA_VERSION}" -o /build/dist/ollama .
-
-# ---------- Runtime image ----------
-FROM ubuntu:24.04
-
-RUN apt-get update && DEBIAN_FRONTEND=noninteractive apt-get install -y \
-    ca-certificates curl libstdc++6 libgomp1 libvulkan1 libopenblas0 \
-    && rm -rf /var/lib/apt/lists/*
-
-# Copy ROCm 6.1 runtime libraries
-# These are needed at runtime by ggml-hip via LD_LIBRARY_PATH
-COPY --from=builder /opt/rocm/lib/ /opt/rocm/lib/
-COPY --from=builder /opt/rocm/share/ /opt/rocm/share/
-
-# Copy ollama binary + all backends (CPU + HIP)
-# CPU install:  /build/dist/lib/ollama/libggml-*.so
-# HIP install:  /build/dist/lib/ollama/rocm/libggml-hip.so
-COPY --from=builder /build/dist/ollama /usr/bin/ollama
-COPY --from=builder /build/dist/lib/ollama/ /usr/lib/ollama/
-
-RUN ldconfig
-
-ENV LD_LIBRARY_PATH=/opt/rocm/lib:/usr/lib/ollama/rocm:/usr/lib/ollama
-ENV HSA_OVERRIDE_GFX_VERSION=9.0.6
-ENV HCC_AMDGPU_TARGET=gfx906
-ENV HSA_ENABLE_SDMA=0
-
-EXPOSE 11434
-ENTRYPOINT ["/bin/ollama"]
-CMD ["serve"]
--- a/flake.lock
+++ b/flake.lock
@@ -23,7 +23,84 @@
        "type": "github"
      }
    },
+    "agenix-rekey": {
+      "inputs": {
+        "devshell": "devshell",
+        "flake-parts": "flake-parts",
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "pre-commit-hooks": "pre-commit-hooks",
+        "treefmt-nix": "treefmt-nix"
+      },
+      "locked": {
+        "lastModified": 1774522439,
+        "narHash": "sha256-GvINrdGznE7mGlDNjW0/PMgOJlC+Nl9MkfxALB4QvWs=",
+        "owner": "oddlama",
+        "repo": "agenix-rekey",
+        "rev": "8b9c179bc1300ab130c90f2d25426bf0e7a2b58d",
+        "type": "github"
+      },
+      "original": {
+        "owner": "oddlama",
+        "repo": "agenix-rekey",
+        "type": "github"
+      }
+    },
+    "argononed": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1729566243,
+        "narHash": "sha256-DPNI0Dpk5aym3Baf5UbEe5GENDrSmmXVdriRSWE+rgk=",
+        "owner": "nvmd",
+        "repo": "argononed",
+        "rev": "16dbee54d49b66d5654d228d1061246b440ef7cf",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nvmd",
+        "repo": "argononed",
+        "type": "github"
+      }
+    },
+    "devshell": {
+      "inputs": {
+        "nixpkgs": [
+          "agenix-rekey",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1728330715,
+        "narHash": "sha256-xRJ2nPOXb//u1jaBnDP56M7v5ldavjbtR6lfGqSvcKg=",
+        "owner": "numtide",
+        "repo": "devshell",
+        "rev": "dd6b80932022cea34a019e2bb32f6fa9e494dfef",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "devshell",
+        "type": "github"
+      }
+    },
    "flake-compat": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1696426674,
+        "narHash": "sha256-kvjfFW7WAETZlt09AgDn1MrtKzP7t90Vf7vypd3OL1U=",
+        "owner": "edolstra",
+        "repo": "flake-compat",
+        "rev": "0f9255e01c2351cc7d116c072cb317785dd33b33",
+        "type": "github"
+      },
+      "original": {
+        "owner": "edolstra",
+        "repo": "flake-compat",
+        "type": "github"
+      }
+    },
+    "flake-compat_2": {
      "flake": false,
      "locked": {
        "lastModified": 1751685974,
@@ -37,6 +114,64 @@
        "url": "https://git.lix.systems/lix-project/flake-compat/archive/main.tar.gz"
      }
    },
+    "flake-compat_3": {
+      "locked": {
+        "lastModified": 1767039857,
+        "narHash": "sha256-vNpUSpF5Nuw8xvDLj2KCwwksIbjua2LZCqhV1LNRDns=",
+        "owner": "edolstra",
+        "repo": "flake-compat",
+        "rev": "5edf11c44bc78a0d334f6334cdaf7d60d732daab",
+        "type": "github"
+      },
+      "original": {
+        "owner": "edolstra",
+        "repo": "flake-compat",
+        "type": "github"
+      }
+    },
+    "flake-parts": {
+      "inputs": {
+        "nixpkgs-lib": [
+          "agenix-rekey",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1733312601,
+        "narHash": "sha256-4pDvzqnegAfRkPwO3wmwBhVi/Sye1mzps0zHWYnP88c=",
+        "owner": "hercules-ci",
+        "repo": "flake-parts",
+        "rev": "205b12d8b7cd4802fbcb8e8ef6a0f1408781a4f9",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hercules-ci",
+        "repo": "flake-parts",
+        "type": "github"
+      }
+    },
+    "gitignore": {
+      "inputs": {
+        "nixpkgs": [
+          "agenix-rekey",
+          "pre-commit-hooks",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1709087332,
+        "narHash": "sha256-HG2cCnktfHsKV0s4XW83gU3F57gaTljL9KNSuG6bnQs=",
+        "owner": "hercules-ci",
+        "repo": "gitignore.nix",
+        "rev": "637db329424fd7e46cf4185293b9cc8c88c95394",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hercules-ci",
+        "repo": "gitignore.nix",
+        "type": "github"
+      }
+    },
    "home-manager": {
      "inputs": {
        "nixpkgs": [
@@ -58,16 +193,37 @@
        "type": "github"
      }
    },
+    "home-manager_2": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs-uconsole"
+        ]
+      },
+      "locked": {
+        "lastModified": 1779506708,
+        "narHash": "sha256-QOD/CNm196nCJRheux/URi4/HE66fthdOMqCJoPP1Y0=",
+        "owner": "nix-community",
+        "repo": "home-manager",
+        "rev": "3ee51fbdac8c8bdfe1e7e1fcaba6520a563f394f",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "ref": "release-25.11",
+        "repo": "home-manager",
+        "type": "github"
+      }
+    },
    "lix": {
      "inputs": {
-        "flake-compat": "flake-compat",
+        "flake-compat": "flake-compat_2",
        "nix2container": "nix2container",
        "nix_2_18": "nix_2_18",
        "nixpkgs": [
          "nixpkgs"
        ],
        "nixpkgs-regression": "nixpkgs-regression",
-        "pre-commit-hooks": "pre-commit-hooks"
+        "pre-commit-hooks": "pre-commit-hooks_2"
      },
      "locked": {
        "lastModified": 1774721317,
@@ -144,6 +300,80 @@
        "type": "github"
      }
    },
+    "nixos-images": {
+      "inputs": {
+        "nixos-stable": [
+          "nixos-raspberrypi",
+          "nixpkgs"
+        ],
+        "nixos-unstable": [
+          "nixos-raspberrypi",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1747747741,
+        "narHash": "sha256-LUOH27unNWbGTvZFitHonraNx0JF/55h30r9WxqrznM=",
+        "owner": "nvmd",
+        "repo": "nixos-images",
+        "rev": "cbbd6db325775096680b65e2a32fb6187c09bbb4",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nvmd",
+        "ref": "sdimage-installer",
+        "repo": "nixos-images",
+        "type": "github"
+      }
+    },
+    "nixos-raspberrypi": {
+      "inputs": {
+        "argononed": "argononed",
+        "flake-compat": "flake-compat_3",
+        "nixos-images": "nixos-images",
+        "nixpkgs": [
+          "nixpkgs-uconsole"
+        ]
+      },
+      "locked": {
+        "lastModified": 1781324200,
+        "narHash": "sha256-JWqxN2Yle86+4Q+GFh12SvB92ZyLeqalVsN9lfMh6eQ=",
+        "owner": "gortium",
+        "repo": "nixos-raspberrypi",
+        "rev": "721a6e9e67dca3a23133db650b87018646bca3e6",
+        "type": "github"
+      },
+      "original": {
+        "owner": "gortium",
+        "ref": "cm5-cross-v1",
+        "repo": "nixos-raspberrypi",
+        "type": "github"
+      }
+    },
+    "nixos-uconsole": {
+      "inputs": {
+        "nixos-raspberrypi": [
+          "nixos-raspberrypi"
+        ],
+        "nixpkgs": [
+          "nixpkgs-uconsole"
+        ]
+      },
+      "locked": {
+        "lastModified": 1781476310,
+        "narHash": "sha256-jY6ujqLXNAWJGvt+pAuw1Wg/OiHRGd1B1Z7Czhiq7Q4=",
+        "owner": "gortium",
+        "repo": "nixos-uconsole",
+        "rev": "38a7fcbffbf2d2e122bc1e1c634fe25f66ecda13",
+        "type": "github"
+      },
+      "original": {
+        "owner": "gortium",
+        "ref": "pr/dcs-panel-detection",
+        "repo": "nixos-uconsole",
+        "type": "github"
+      }
+    },
    "nixpkgs": {
      "locked": {
        "lastModified": 1705033721,
@@ -176,6 +406,22 @@
        "type": "github"
      }
    },
+    "nixpkgs-uconsole": {
+      "locked": {
+        "lastModified": 1780952837,
+        "narHash": "sha256-Fwd1+spDtQ0hDyBwme6ufG3n4mY0UrjjFdYHv+G/Hds=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "e820eb4a444b46a19b2e03e8dfd2359439ff30fe",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixos-25.11",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
    "nixpkgs_2": {
      "locked": {
        "lastModified": 1774386573,
@@ -193,6 +439,29 @@
      }
    },
    "pre-commit-hooks": {
+      "inputs": {
+        "flake-compat": "flake-compat",
+        "gitignore": "gitignore",
+        "nixpkgs": [
+          "agenix-rekey",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1735882644,
+        "narHash": "sha256-3FZAG+pGt3OElQjesCAWeMkQ7C/nB1oTHLRQ8ceP110=",
+        "owner": "cachix",
+        "repo": "pre-commit-hooks.nix",
+        "rev": "a5a961387e75ae44cc20f0a57ae463da5e959656",
+        "type": "github"
+      },
+      "original": {
+        "owner": "cachix",
+        "repo": "pre-commit-hooks.nix",
+        "type": "github"
+      }
+    },
+    "pre-commit-hooks_2": {
      "flake": false,
      "locked": {
        "lastModified": 1769939035,
@@ -211,8 +480,13 @@
    "root": {
      "inputs": {
        "agenix": "agenix",
+        "agenix-rekey": "agenix-rekey",
+        "home-manager": "home-manager_2",
        "lix": "lix",
-        "nixpkgs": "nixpkgs_2"
+        "nixos-raspberrypi": "nixos-raspberrypi",
+        "nixos-uconsole": "nixos-uconsole",
+        "nixpkgs": "nixpkgs_2",
+        "nixpkgs-uconsole": "nixpkgs-uconsole"
      }
    },
    "systems": {
@@ -229,6 +503,27 @@
        "repo": "default",
        "type": "github"
      }
+    },
+    "treefmt-nix": {
+      "inputs": {
+        "nixpkgs": [
+          "agenix-rekey",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1735135567,
+        "narHash": "sha256-8T3K5amndEavxnludPyfj3Z1IkcFdRpR23q+T0BVeZE=",
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "rev": "9e09d30a644c57257715902efbb3adc56c79cf28",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "type": "github"
+      }
    }
  },
  "root": "root",
--- a/flake.nix
+++ b/flake.nix
@@ -8,13 +8,17 @@
      inputs.darwin.follows = "";
      inputs.nixpkgs.follows = "nixpkgs";
    };
+    agenix-rekey = {
+      url = "github:oddlama/agenix-rekey";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
    lix = {
      url = "git+https://git.lix.systems/lix-project/lix?ref=main";
      inputs.nixpkgs.follows = "nixpkgs";
    };
    nixpkgs-uconsole.url = "github:NixOS/nixpkgs/nixos-25.11";
    nixos-uconsole = {
-      url = "github:gortium/nixos-uconsole/cm5_fix";
+      url = "github:gortium/nixos-uconsole/pr/dcs-panel-detection";
      inputs.nixpkgs.follows = "nixpkgs-uconsole";
      inputs.nixos-raspberrypi.follows = "nixos-raspberrypi";
    };
@@ -22,10 +26,15 @@
      url = "github:gortium/nixos-raspberrypi/cm5-cross-v1";
      inputs.nixpkgs.follows = "nixpkgs-uconsole";
    };
+    home-manager = {
+      url = "github:nix-community/home-manager/release-25.11";
+      inputs.nixpkgs.follows = "nixpkgs-uconsole";
+    };
  };

-  outputs = { self, nixpkgs, agenix, lix
+  outputs = { self, nixpkgs, agenix, agenix-rekey, lix
            , nixpkgs-uconsole, nixos-uconsole, nixos-raspberrypi
+            , home-manager
            , ... }@inputs:
    let
      system = "x86_64-linux";
@@ -37,7 +46,7 @@
          "/etc/ssh/ssh_host_ed25519_key"
          "/root/.age/bootstrap.key" ];
      };
-      overlays = [ agenix.overlays.default ];
+      overlays = [ agenix.overlays.default (import ./overlays/reticulum.nix) ];
      pkgs = import nixpkgs {
        inherit system overlays;
        config.allowUnfree = true;
@@ -46,6 +55,191 @@
      devShell = import ./shells/nix_dev.nix {
        inherit pkgs system agenix;
      };
+
+       ##############################################################################
+      # CROSS-COMPILE WORKAROUNDS — packages that fail aarch64 cross-compile
+      #
+      # These packages need NATIVE COMPILATION on the uConsole itself (aarch64).
+      # They cannot cross-compile from x86_64 for various reasons listed below.
+      # We work around them in the overlay until we set up distributed builds
+      # with the uConsole as a native aarch64 builder.
+      #
+      # ==== Cross-compile failures ====
+      #
+      # libcamera / libcamera-rpi / libpisp:
+      #   meta.platforms excludes aarch64. pipewire hard-depends on them in nixos-25.11.
+      #   Fix: empty meta.platforms + strip from pipewire buildInputs.
+      #
+      # gjs:
+      #   Need native display (GTK3/4 tests) for cross-compile configure.
+      #   Fix: meson -Dskip_gtk_tests=true.
+      #
+      # hyprland:
+      #   Qt6Quick missing from aarch64 qtdeclarative, breaks hyprland-qt-support.
+      #   Fix: wrapRuntimeDeps=false (Qt UI components disabled, WM still works).
+      #
+      # boost.mpi:
+      #   Boost.Build has no b2 architecture alternatives for ARM.
+      #   Fix: useMpi=false.
+      #
+      # perl-ldap (perlPackages.perlldap):
+      #   Module::Install requires Perl dynamic loading (Fcntl) which is
+      #   unavailable in cross-compiled Perl.
+      #   Fix: stripped from john.s propagatedBuildInputs.
+      #
+      # john (John the Ripper):
+      #   Indirectly affected — depends on perl-ldap for perl utility scripts.
+      #   Fix: perl-ldap stripped from propagatedBuildInputs (john still works,
+      #   just loses sha-dump.pl etc. LDAP support).
+      #
+      # gss (GNU Generic Security Service):
+      #   autogen.sh fails cross-compile. Pulled by mailutils → emacs-pgtk.
+      #   Fix: emacs withMailutils=false.
+      #
+      # emacs-pgtk:
+      #   Indirectly affected — depends on mailutils which depends on gss.
+      #   Fix: withMailutils=false (no mail/IMAP within emacs).
+      #
+      # qtquick3d (Qt6):
+      #   Qt::Quick not available in aarch64 cross-compile qtdeclarative.
+      #   cmake skips build, ninja has no install target.
+      #   Fix: removed js8call, switched wireshark → wireshark-cli.
+      #
+      # js8call:
+      #   REMOVED from system packages. Depends on Qt6 multimedia → qtquick3d.
+      #
+      # wireshark-qt:
+      #   SWITCHED to wireshark-cli. Same Qt6 multimedia → qtquick3d chain.
+      #
+# neovim:
+#   `libnlua0.so` built for aarch64, luajit (x86_64) tries to load it
+#   during codegen (preload_nlua.lua). No clean override option.
+#   Fix: remove from system packages + install via native build
+#   once uConsole is set up as remote builder.
+#
+# clamav:
+#   cmake try_run() + Rust proc-macro can't find native linker in
+#   cross-compile (cc crate uses cross CC, no cc in PATH for build
+#   scripts). Chain: clamav → system-path → etc → dbus → polkit.
+#   Fix: remove from system packages; clamscan available from server.
+
+#
+# ==== Remote builder setup (bidirectional) — TODO ====
+# To eliminate cross-compile exceptions, set up distributed builds:
+# 1. Create a dedicated `builder` user on both hosts (no shell, home=/var/empty)
+# 2. Add the same SSH key to both hosts (symmetric)
+# 3. On lazyworkhorse — `nix.buildMachines` pointing to uConsole for aarch64-linux
+# 4. On uConsole — `nix.buildMachines` pointing to lazyworkhorse for x86_64-linux
+# 5. Remove the uconsoleCrossOverlay workarounds above
+# 6. Nix auto-dispatches derivations by `system` — no per-package exceptions needed
+# Example buildMachines config:
+# Server dispatches aarch64 builds to uConsole (4 cores, less power):
+#   nix.buildMachines = [{
+#     hostName = "uConsole.local";
+#     systems = ["aarch64-linux"];
+#     maxJobs = 4;
+#     sshUser = "builder";
+#     sshKey = "/etc/ssh/builder_key";
+#   }];
+# uConsole dispatches x86_64 builds to server (36 cores, 256GB RAM):
+#   nix.buildMachines = [{
+#     hostName = "lazyworkhorse.net";
+#     port = 2424;
+#     systems = ["x86_64-linux"];
+#     maxJobs = 36;
+#     sshUser = "builder";
+#     sshKey = "/etc/ssh/builder_key";
+#   }];
+
+      # ==== How to build natively on uConsole ====
+      # To native-compile these on the uConsole:
+      # 1. Add uConsole as a remote builder (nix.buildMachines)
+      # 2. Set nix.extra-platforms = [ "aarch64-linux" ] on server
+      # 3. Remove the overlay workarounds below
+      # 4. Packages will auto-dispatch to uConsole for native builds
+      ##############################################################################
+      uconsoleCrossOverlay = final: prev: {
+        libcamera = prev.libcamera.overrideAttrs (_: { meta.platforms = []; });
+        libcamera-rpi = prev.libcamera-rpi.overrideAttrs (_: { meta.platforms = []; });
+        libpisp = prev.libpisp.overrideAttrs (_: { meta.platforms = []; });
+        pipewire = prev.pipewire.overrideAttrs (old: {
+          buildInputs = builtins.filter
+            (x: !(x?pname && x.pname == "libcamera"))
+            (old.buildInputs or []);
+          mesonFlags = builtins.filter
+            (flag: !(builtins.isString flag && builtins.match ".*libcamera.*" flag != null))
+            (old.mesonFlags or []) ++ [ "-Dlibcamera=disabled" ];
+        });
+        gjs = prev.gjs.overrideAttrs (old: {
+          mesonFlags = (old.mesonFlags or []) ++ [ "-Dskip_gtk_tests=true" ];
+        });
+        hyprland = prev.hyprland.override { wrapRuntimeDeps = false; };
+        boost = prev.boost.override { useMpi = false; };
+        # perl-ldap cannot cross-compile (Module::Install needs dynamic loading)
+        xdg-desktop-portal-hyprland = prev.xdg-desktop-portal-hyprland.overrideAttrs (old: {
+          preConfigure = (old.preConfigure or "") + ''
+            cmakeFlags="$cmakeFlags -Dhyprwayland-scanner_DIR=${prev.buildPackages.hyprwayland-scanner}/lib/cmake/hyprwayland-scanner" 2>/dev/null || true
+            export PKG_CONFIG_PATH="${prev.buildPackages.hyprwayland-scanner}/lib/pkgconfig:$PKG_CONFIG_PATH"
+          '';
+        });
+        emacs-pgtk = prev.emacs-pgtk.override { withMailutils = false; };
+        # perl-ldap fails cross-compile (Module::Install needs dynamic loading)
+        # Strip it from john deps -- the perl scripts that need it are not critical
+        john = prev.john.overrideAttrs (old: {
+          propagatedBuildInputs = builtins.filter
+            (x: x?pname && x.pname != "perl-ldap")
+            (old.propagatedBuildInputs or []);
+        });
+        # clamav: removed from system packages (see note above).
+      };
+
+      uconsoleRpiPipewireOverlay = final: prev: {
+        pipewire = prev.pipewire.overrideAttrs (old: {
+          buildInputs = builtins.filter
+            (x: !(x?pname && x.pname == "libcamera"))
+            (old.buildInputs or []);
+          mesonFlags = builtins.filter
+            (flag: !(builtins.isString flag && builtins.match ".*libcamera.*" flag != null))
+            (old.mesonFlags or []) ++ [ "-Dlibcamera=disabled" ];
+        });
+      };
+
+      uconsoleBaseModules = [
+        {
+          nixpkgs.buildPlatform = "x86_64-linux";
+          nixpkgs.hostPlatform = "aarch64-linux";
+          nixpkgs.config.allowUnfree = true;
+          boot.loader.raspberry-pi.bootloader = "kernel";
+          nixpkgs.overlays = [ uconsoleCrossOverlay (import ./overlays/reticulum.nix) ];
+        }
+        nixos-raspberrypi.nixosModules.nixpkgs-rpi
+        ({ config, lib, pkgs, ... }: {
+          nixpkgs.overlays = [ uconsoleRpiPipewireOverlay ];
+        })
+        nixos-raspberrypi.nixosModules.raspberry-pi-5.base
+        nixos-raspberrypi.lib.inject-overlays
+        nixos-raspberrypi.lib.inject-overlays-global
+        nixos-uconsole.nixosModules.uconsole-cm5
+        ./modules/nixos/hardware/uconsole-cm5-aio-v2.nix
+        ({ config, lib, pkgs, inputs, ... }: let
+          lixCross = import inputs.nixpkgs-uconsole {
+            localSystem = { system = "x86_64-linux"; };
+            crossSystem = { system = "aarch64-linux"; };
+            overlays = [ inputs.lix.overlays.default ];
+          };
+        in { nix.package = lixCross.lix; })
+        inputs.home-manager.nixosModules.home-manager
+        agenix.nixosModules.default
+        agenix-rekey.nixosModules.default
+        ./hosts/uconsole-cm5/configuration.nix
+        ./hosts/uconsole-cm5/hardware-configuration.nix
+        ./modules/nixos/services/remote-builder.nix
+        ./modules/nixos/services/wireguard-client.nix
+        ./modules/nixos/services/clamav.nix
+        ./modules/nixos/security/ai-worker-restricted.nix
+        ./users/gortium/gortium.nix
+        ./users/ai-worker/ai-worker.nix
+      ];
    in {
      nixosConfigurations = {
        lazyworkhorse = nixpkgs.lib.nixosSystem {
@@ -58,17 +252,19 @@
              nixpkgs.config.permittedInsecurePackages = [ "openclaw-2026.3.12" ];
              nix.package = lix.packages.${system}.default;
            }
+            inputs.home-manager.nixosModules.home-manager
            agenix.nixosModules.default
            ./hosts/lazyworkhorse/configuration.nix
            ./hosts/lazyworkhorse/hardware-configuration.nix
            ./modules/nixos/filesystem/hoardingcow-mount.nix
            ./modules/nixos/services/docker_manager.nix
-            ./modules/nixos/services/open_code_server.nix
+            ./modules/nixos/filesystem/poup-16t-disk.nix
            ./modules/nixos/services/ollama_init_custom_models.nix
-            ./modules/nixos/services/openclaw_node.nix
+            ./modules/nixos/services/open_code_server.nix
+            ./modules/nixos/services/clamav.nix
            ./modules/nixos/security/ai-worker-restricted.nix
-            ./users/gortium.nix
-            ./users/ai-worker.nix
+            ./users/gortium/gortium.nix
+            ./users/ai-worker/ai-worker.nix
          ];
        };

@@ -83,6 +279,9 @@
            }
            ./hosts/cyt-pi/configuration.nix
            ./hosts/cyt-pi/hardware-configuration.nix
+            ./modules/nixos/services/remote-builder.nix
+        ./modules/nixos/services/wireguard-client.nix
+            ./users/gortium/gortium.nix
          ];
        };

@@ -93,33 +292,15 @@
            nixos-raspberrypi = nixos-raspberrypi;
            isCM4 = false;
          };
-          modules = [
-            {
-              nixpkgs.buildPlatform = "x86_64-linux";
-              nixpkgs.hostPlatform = "aarch64-linux";
-              nixpkgs.config.allowUnfree = true;
-              boot.loader.raspberry-pi.bootloader = "kernel";
-            }
-            nixos-raspberrypi.nixosModules.nixpkgs-rpi
-# Patches are now in gortium/nixos-uconsole fork (cm5_fix branch)
-            nixos-raspberrypi.nixosModules.raspberry-pi-5.base
-            nixos-raspberrypi.lib.inject-overlays
-            nixos-raspberrypi.lib.inject-overlays-global
-            nixos-uconsole.nixosModules.uconsole-cm5
-            ({ config, lib, pkgs, inputs, ... }: let
-              lix-cross = import inputs.nixpkgs-uconsole {
-                localSystem = { system = "x86_64-linux"; };
-                crossSystem = { system = "aarch64-linux"; };
-                overlays = [ inputs.lix.overlays.default ];
-              };
-            in { nix.package = lix-cross.lix; })
-            agenix.nixosModules.default
-            ./hosts/uconsole-cm5/configuration.nix
-            ./hosts/uconsole-cm5/hardware-configuration.nix
-          ];
+          modules = uconsoleBaseModules;
        };
      };

+      agenix-rekey = agenix-rekey.configure {
+        userFlake = self;
+        nixosConfigurations = self.nixosConfigurations;
+      };
+
      devShells.${system}.default = devShell;

      packages.${system} = {
@@ -130,18 +311,8 @@
            nixos-raspberrypi = nixos-raspberrypi;
            isCM4 = false;
          };
-          modules = [
-            {
-              nixpkgs.buildPlatform = system;
-              nixpkgs.hostPlatform = "aarch64-linux";
-            }
-            nixos-raspberrypi.nixosModules.nixpkgs-rpi
-            nixos-raspberrypi.nixosModules.raspberry-pi-5.base
-            nixos-raspberrypi.lib.inject-overlays-global
+          modules = uconsoleBaseModules ++ [
            nixos-raspberrypi.nixosModules.sd-image
-            nixos-uconsole.nixosModules.uconsole-cm5
-            agenix.nixosModules.default
-            ./hosts/uconsole-cm5/configuration.nix
          ];
        }).config.system.build.sdImage;
      };
--- a/hosts/lazyworkhorse/configuration.nix
+++ b/hosts/lazyworkhorse/configuration.nix
@@ -49,24 +49,12 @@
  networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
  networking.hostId = "deadbeef";

-  # WireGuard VPN client -- always up, connects to wg-easy server
-  # Create age-encrypted secrets before deploying (run on the host):
-  #   echo -n "<private_key>" | agenix -e secrets/wireguard_private_key.age
-  #   echo -n "<preshared_key>" | agenix -e secrets/wireguard_preshared_key.age
-  networking.wireguard.interfaces = {
-    wg0 = {
-      ips = [ "10.8.0.3/24" ];
-      privateKeyFile = config.age.secrets.wireguard_private_key.path;
-      peers = [
-        {
-          publicKey = "rY9zII3AOm8rog2rv02PyA3Bq7zdvTOGkZapfCV1DkE=";
-          presharedKeyFile = config.age.secrets.wireguard_preshared_key.path;
-          allowedIPs = [ "10.8.0.0/24" ];
-          endpoint = "vpn.lazyworkhorse.net:51820";
-          persistentKeepalive = 25;
-        }
-      ];
-    };
+  # WireGuard VPN client -- module, always up, connects to wg-easy server
+  gortium.wireguard-client = {
+    enable = true;
+    vpnIp = "10.8.0.3/24";
+    privateKeyFile = config.age.secrets.wireguard_private_key.path;
+    presharedKeyFile = config.age.secrets.wireguard_preshared_key.path;
  };

  # Set your time zone.
@@ -178,9 +166,9 @@
    settings = {
      PasswordAuthentication = false;
      KbdInteractiveAuthentication = false;
-      # Additional hardening settings below in SERVER HARDENING section
-    };
-    hostKeys = [
+  # ============================================================
+  # ClamAV antivirus — daemon, hourly updates, daily scan, on-access
+  # ============================================================
      {
        path = "/etc/ssh/ssh_host_ed25519_key";
        type = "ed25519";
@@ -349,6 +337,16 @@
  # networking.firewall.enable = false;

  # =============================================================================
+  # ============================================================
+  # ClamAV antivirus — daemon, hourly updates, daily scan, on-access
+  # ============================================================
+  gortium.clamav = {
+    enable = true;
+    enableDaemon = true;
+    onAccessScanning = true;
+    dailyScanTime = "03:00";
+  };
+
  # SERVER HARDENING - Firewall, Fail2ban, SSH, Kernel
  # =============================================================================
  
--- a/hosts/lazyworkhorse/hyperspace-commit-msg.txt
+++ b/hosts/lazyworkhorse/hyperspace-commit-msg.txt
@@ -1,12 +0,0 @@
-feat: add Hyperspace Pods NixOS module
-
-Create modules/nixos/services/hyperspace.nix for the Hyperspace Pods
-P2P AI cluster agent. Registered in flake.nix under lazyworkhorse.
-
- Fetches CLI binary v5.45.30 via fetchurl with SRI hash verification
- Systemd system service: auto profile, configurable api port 8080,
-  ai-worker user, GPU device access (kfd+dri), SupplementaryGroups
-  for video+render groups, service hardening
- Firewall: TCP 4001 libp2p, 30301 chain, 8080 API; UDP 4001 libp2p
- AMD MI50 ROCm via HSA_OVERRIDE_GFX_VERSION=9.0.6
- Adds video+render groups to ai-worker for persistent GPU access
--- a/hosts/lazyworkhorse/hyperspace.nix
+++ b/hosts/lazyworkhorse/hyperspace.nix
@@ -1,134 +0,0 @@
-{ config, lib, pkgs, ... }:
-
-let
-  cfg = config.services.hyperspace;
-
-  hyperspacePkg = pkgs.stdenv.mkDerivation {
-    name = "hyperspace-pods-${cfg.version}";
-    src = pkgs.fetchurl {
-      url = "https://github.com/hyperspaceai/aios-cli/releases/download/v${cfg.version}/aios-cli-x86_64-unknown-linux-gnu.tar.gz";
-      hash = cfg.packageHash;
-    };
-    sourceRoot = ".";
-    installPhase = ''
-      mkdir -p $out/libexec $out/bin
-      cp -r * $out/libexec/
-      chmod +x $out/libexec/aios-cli
-      ln -s $out/libexec/aios-cli $out/bin/hyperspace
-    '';
-  };
-in {
-  options.services.hyperspace = {
-    enable = lib.mkEnableOption "Hyperspace Pods P2P AI cluster agent";
-
-    version = lib.mkOption {
-      type = lib.types.str;
-      default = "5.45.30";
-      description = "Hyperspace CLI version to download.";
-    };
-
-    packageHash = lib.mkOption {
-      type = lib.types.str;
-      default = "sha256-f6fJ8t3exqtYwUD5j+WvD+Hm0oN/Eef0X+R9Rj23dE0=";
-      description = ''
-        SRI hash of the hyperspace release tarball (sha256-<base64>).
-        Must be updated when version changes. Generate with:
-        nix store prefetch-file --hash-algo sha256 \\
-          https://github.com/hyperspaceai/aios-cli/releases/download/v{version}/aios-cli-x86_64-unknown-linux-gnu.tar.gz
-      '';
-    };
-
-    user = lib.mkOption {
-      type = lib.types.str;
-      default = "ai-worker";
-      description = "System user to run the Hyperspace agent.";
-    };
-
-    apiPort = lib.mkOption {
-      type = lib.types.port;
-      default = 8080;
-      description = "OpenAI-compatible API port (configurable via --api-port).";
-    };
-
-    profile = lib.mkOption {
-      type = lib.types.str;
-      default = "auto";
-      description = ''
-        Agent profile. Options: auto (auto-detect hardware), full (all capabilities),
-        inference (GPU inference only), embedding (CPU embedding only),
-        relay (lightweight relay), storage (storage + memory).
-      '';
-    };
-
-    autoStart = lib.mkOption {
-      type = lib.types.bool;
-      default = true;
-      description = "Start the agent automatically on boot.";
-    };
-
-    openFirewall = lib.mkOption {
-      type = lib.types.bool;
-      default = true;
-      description = "Open P2P mesh (4001 TCP+UDP, 30301 TCP) and API port in the firewall.";
-    };
-
-    extraArgs = lib.mkOption {
-      type = lib.types.listOf lib.types.str;
-      default = [ ];
-      description = "Extra arguments to pass to 'hyperspace start'.";
-    };
-  };
-
-  config = lib.mkIf cfg.enable {
-    systemd.services.hyperspace = {
-      description = "Hyperspace Pods P2P AI Cluster Agent";
-      after = [ "network.target" "network-online.target" ];
-      wants = [ "network-online.target" ];
-      wantedBy = lib.mkIf cfg.autoStart [ "multi-user.target" ];
-
-      path = with pkgs; [ bash coreutils ];
-
-      serviceConfig = {
-        Type = "simple";
-        User = cfg.user;
-        Group = cfg.user;
-        WorkingDirectory = "${hyperspacePkg}/libexec";
-        ExecStart = "${hyperspacePkg}/bin/hyperspace start --profile ${cfg.profile} --api-port ${toString cfg.apiPort} ${lib.escapeShellArgs cfg.extraArgs}";
-        Restart = "on-failure";
-        RestartSec = 5;
-
-        # AMD MI50 (ROCm) device access
-        DeviceAllow = [ "/dev/kfd rw" "/dev/dri rw" ];
-
-        # Supplementary groups for GPU/accelerator access
-        SupplementaryGroups = [ "video" "render" ];
-
-        # Hardening
-        NoNewPrivileges = true;
-        ProtectHome = "tmpfs";
-        ProtectSystem = "strict";
-        PrivateTmp = true;
-        PrivateDevices = false; # Needs /dev/kfd and /dev/dri
-      };
-
-      environment = {
-        HSA_OVERRIDE_GFX_VERSION = "9.0.6";
-        HOME = "/home/${cfg.user}";
-      };
-    };
-
-    # Firewall ports for P2P mesh (libp2p 4001, chain 30301) and API
-    networking.firewall.allowedTCPPorts = lib.mkIf cfg.openFirewall [ 4001 30301 cfg.apiPort ];
-    networking.firewall.allowedUDPPorts = lib.mkIf cfg.openFirewall [ 4001 ];
-
-    # Add GPU/accelerator groups to the service user (persistent beyond service restarts)
-    users.users = lib.mkIf (cfg.user == "ai-worker") {
-      ai-worker = {
-        extraGroups = [ "video" "render" ];
-      };
-    };
-
-    # ROCm override for AMD MI50 (gfx906) compatibility
-    environment.variables.HSA_OVERRIDE_GFX_VERSION = "9.0.6";
-  };
-}
--- a/hosts/uconsole-cm5/configuration.nix
+++ b/hosts/uconsole-cm5/configuration.nix
@@ -1,11 +1,11 @@
 { config, lib, pkgs, keys, ... }:
-
 {
  networking.hostName = "uConsole";
  time.timeZone = "America/Montreal";
  i18n.defaultLocale = "en_CA.UTF-8";
  system.stateVersion = "25.11";
-
+  # Boot & Hardware
+  boot.loader.raspberry-pi.bootloader = "kernel";
  # SSH — root access avec clés gortium + ai-worker
  services.openssh = {
    enable = true;
@@ -14,21 +14,190 @@
      PasswordAuthentication = lib.mkForce false;
    };
  };
-
  users.users.root.openssh.authorizedKeys.keys = with keys; [
    users.gortium.main
    users.ai-worker.main
  ];
-
-  # WiFi via NetworkManager + secret agenix
+  # Age secret for gortium password (file created by user)
+  age.secrets.gortium_password = {
+    file = ../../secrets/gortium_password.age;
+  };
+  # WiFi via NetworkManager
  networking.networkmanager.enable = true;
-
  # Firmware
  hardware.enableRedistributableFirmware = true;
-
  # Hyprland Wayland compositor (manual start — no SDDM)
  programs.hyprland = {
    enable = true;
    xwayland.enable = true;
  };
+  # HackerGadgets AIO v2 board
+  hardware.uconsole-cm5-aio-v2 = {
+    enable = true;
+    bootRails = {
+      GPS  = false;
+      LORA = false;
+      SDR  = false;
+      USB  = false;
+    };
+    enableGPS = false;
+  };
+  # User
+  users.users.gortium = {
+    isNormalUser = true;
+    extraGroups = [ "wheel" "networkmanager" "video" "dialout" "kismet" ];
+    hashedPasswordFile = config.age.secrets.gortium_password.path;
+    openssh.authorizedKeys.keys = [
+      keys.users.gortium.main
+      keys.users.gortium.gitea
+    ];
+  };
+  security.sudo.extraRules = [
+    {
+      users = [ "gortium" ];
+      commands = [{
+        command = "ALL";
+        options = [ "NOPASSWD" ];
+      }];
+    }
+  ];
+  # ============================================================
+  # Package groups
+  # ============================================================
+  # ============================================================
+  # CROSS-COMPILE REMOVALS — packages removed for aarch64 bootstrap
+  # ============================================================
+  # These packages fail to cross-compile for aarch64.
+  # Install them natively AFTER the first successful switch.
+  #
+  # Removed:                              Reason:
+#   inspectrum — Qt5 cross-compile cascade fails (qtsvg mismatched qtbase deps)
+  #   hashcat   — Makefile calls gcc directly (cross-compiler not used)
+  #   neovim    — Same as hashcat: Makefile calls gcc directly (cross-compiler not used)
+  #   clamav    — cmake try_run + Rust proc-macro linker for aarch64
+  #   sdrpp     — glfw/wxPython cross-compile fails
+  #   gqrx      — Qt5 cross-compile cascade fails
+  #   emacs-pgtk → emacs-nox — GTK3 + mailutils → gss → shishi chain
+  #   viking    — GTK3 GPS map editor
+  #   foxtrotgps — GTK2 GPS app
+  #   js8call   — QtQuick3D dep
+  #   wsjtx     — qtbase/Qt5 linker fails (collect2: ld returned 1)
+  #   fldigi    — same: qtbase/Qt5 linker fails
+#   gpsbabel  — qmake can't find cross-compiler g++
+  # ============================================================
+  environment.systemPackages = with pkgs; [
+    # ===== Base =====
+    # emacs-pgtk — removed for bootstrap (GTK3 cross-compile fails)
+    # emacs-nox — removed for bootstrap (depends on mailutils -> gss -> shishi, cross-compile fails)
+    git
+    ripgrep
+    fd
+    htop
+    tmux
+    # ===== HAM Radio =====
+    # wsjtx — removed for aarch64 bootstrap (qtbase/Qt5 cross-compile linker fails)
+    # fldigi — removed for aarch64 bootstrap (qtbase/Qt5 cross-compile linker fails)
+    pat                        # Winlink client
+    direwolf                   # AX.25 packet modem
+    chirp                      # Radio programming tool
+    hamlib                     # Ham radio control libraries
+    trustedqsl                 # Logbook of the World (LoTW)
+    # ===== SDR / RF =====
+    # sdrpp — removed for aarch64 cross-compile bootstrap (glfw/wxPython fails)
+    # gqrx — removed for aarch64 cross-compile bootstrap (Qt5 cascade fails)
+    rtl-sdr                    # RTL-SDR drivers & utilities
+    # inspectrum                # removed for aarch64 bootstrap (Qt5 cross-compile cascade fails)
+    soapysdr-with-plugins      # SoapySDR + hardware support plugins
+    # ===== Mesh / LoRa =====
+    reticulumStack             # Reticulum Network Stack
+    lxmf                       # LXMF messaging protocol
+    nomadnet                   # Nomad Network client
+    # ===== Security =====
+    nmap
+    aircrack-ng
+    kismet                     # Wi-Fi monitor / IDS
+    bettercap                  # MITM/network attack framework
+    wireshark-cli                  # Packet analyzer
+    john                       # John the Ripper
+    sqlmap                     # SQL injection tool
+    # ===== GPS / Maps =====
+    # foxtrotgps — removed for aarch64 cross-compile bootstrap (GTK2 fails)
+    # viking — removed for aarch64 cross-compile bootstrap (GTK3 fails)
+    # gpsbabel # GPS data conversion
+  ];
+  # ============================================================
+  # Reticulum Service (rnsd)
+  # ============================================================
+  systemd.services.rnsd = {
+    description = "Reticulum Network Stack Daemon";
+    wants = [ "network-online.target" ];
+    after = [ "network-online.target" ];
+    wantedBy = [ "multi-user.target" ];
+    serviceConfig = {
+      User = "gortium";
+      Group = "gortium";
+      ExecStart = "${pkgs.reticulumStack}/bin/rnsd";
+      Restart = "always";
+      RestartSec = "10s";
+      LimitNOFILE = 65536;
+    };
+  };
+  # ============================================================
+  # Kismet Service (Wi-Fi monitoring / mesh node)
+  # ============================================================
+  systemd.services.kismet = {
+    description = "Kismet Wi-Fi Monitor & IDS";
+    wants = [ "network-online.target" ];
+    after = [ "network-online.target" ];
+    wantedBy = [ "multi-user.target" ];
+    serviceConfig = {
+      User = "gortium";
+      Group = "kismet";
+      ExecStart = "${pkgs.kismet}/bin/kismet -c wlan0 --log-base=/home/gortium/kismet_logs --no-nc-ui";
+      Restart = "always";
+      RestartSec = "10s";
+    };
+  };
+  # ============================================================
+  # Kernel modules for SDR and radio
+  # ============================================================
+  boot.kernelModules = [
+    "88x2bu"          # Realtek 8812/8821BU USB WiFi
+    "rtl8xxxu"        # RTL8188/8192/8723 USB WiFi
+    "rtl2832_sdr"     # RTL-SDR kernel module
+    "dvb_usb_rtl28xxu" # RTL-SDR DVB-T
+  ];
+  # ============================================================
+  # Extra udev rules for SDR and HAM radio devices
+  # ============================================================
+  services.udev.packages = with pkgs; [ rtl-sdr ];
+  # ============================================================
+  # Enable IPv6 for Reticulum mesh
+  # ============================================================
+  networking.enableIPv6 = true;
+  # ============================================================
+  # Firewall
+  # ============================================================
+  networking.firewall.allowedTCPPorts = [ 22 ];
+  networking.firewall.allowedUDPPorts = [ ];
+  # ============================================================
+  # agenix-rekey — automatic secret re-encryption at deploy time
+  # ============================================================
+  age.rekey = {
+    # Master identities for encrypting secrets (on Thierry's laptop)
+    masterIdentities = [
+      "/home/gortium/.ssh/gortium_ssh_key"
+    ];
+    # uConsole SSH host pubkey — for automatic rekey at build time
+    # Once uConsole is deployed, replace with actual pubkey from:
+    #   ssh-keyscan uConsole.local | ssh-to-age
+    hostPubkey = "age1qyqszqgpqyqszqgpqyqszqgpqyqszqgpqyqszqgpqyqszqgpqyqs3290gq"; # dummy — replace after bootstrap
+  };
+
+  # Pipewire overlay: drop libcamera (fixes aarch64 cross-compile — rpi-pisp blocks)
+  nixpkgs.overlays = [
+    (final: prev: {
+      pipewire = prev.pipewire.override { libcamera = null; };
+    })
+  ];
 }
--- a/modules/nixos/filesystem/poup-16t-disk.nix
+++ b/modules/nixos/filesystem/poup-16t-disk.nix
@@ -0,0 +1,121 @@
+{ config, lib, pkgs, ... }:
+
+let
+  cfg = config.gortium.poup16t;
+  luksName = cfg.luksName;
+in
+with lib;
+
+{
+  options.gortium.poup16t = {
+    enable = mkEnableOption "Poup_16T storage disk (btrfs + LUKS + btrbk snapshots)";
+
+    luksUuid = mkOption {
+      type = types.str;
+      description = ''
+        UUID of the LUKS partition on the 16TB disk (WD Red Pro).
+
+        Find this by running as root when the disk is connected:
+          blkid /dev/sdb   # or wherever the disk appears
+          lsblk -o NAME,SIZE,FSTYPE,UUID
+
+        Since btrfs is inside LUKS, the FS UUID is hidden — use the
+        LUKS partition UUID from blkid (it'll show TYPE=\"crypto_LUKS\").
+      '';
+      example = "00000000-0000-0000-0000-000000000000";
+    };
+
+    luksName = mkOption {
+      type = types.str;
+      default = "poup_16t";
+      description = "Name for the LUKS /dev/mapper/ mapping";
+    };
+
+    mountPoint = mkOption {
+      type = types.str;
+      default = "/mnt/Poup_16T";
+      description = "Mount point for the 16TB data disk";
+    };
+
+    btrfsOptions = mkOption {
+      type = types.listOf types.str;
+      default = [ "defaults" "noatime" "compress=zstd:3" "nofail" ];
+      description = "Mount options for the btrfs filesystem. 'nofail' ensures boot succeeds when disk is disconnected.";
+    };
+
+    btrbk = {
+      enable = mkOption {
+        type = types.bool;
+        default = true;
+        description = "Enable btrbk snapshot management on this volume";
+      };
+
+      schedule = mkOption {
+        type = types.str;
+        default = "daily";
+        description = "systemd calendar event for btrbk (e.g. 'daily', 'hourly', '*-*-* 00:00:00')";
+      };
+
+      preserveMin = mkOption {
+        type = types.str;
+        default = "2d";
+        description = "btrbk snapshot_preserve_min — minimum age before pruning";
+      };
+
+      preserve = mkOption {
+        type = types.str;
+        default = "14d 4w 3m";
+        description = "btrbk snapshot_preserve — retention policy (daily, weekly, monthly)";
+      };
+
+      snapshotDir = mkOption {
+        type = types.str;
+        default = ".snapshots";
+        description = "Directory name for snapshots relative to volume root";
+      };
+    };
+  };
+
+  config = mkIf cfg.enable {
+    # Enable btrfs kernel support (no DKMS needed — it's in-tree)
+    boot.supportedFilesystems = [ "btrfs" ];
+
+    # Install btrfs administration tools
+    environment.systemPackages = with pkgs; [
+      btrfs-progs       # mkfs.btrfs, btrfs, fsck, balance, scrub
+      btrbk             # Snapshot management + rotation
+    ];
+
+    # LUKS2 unlock at boot (uses keyfile or prompts if unavailable)
+    # Since the disk may be disconnected, initrd times out gracefully (~30s)
+    boot.initrd.luks.devices.${luksName} = {
+      device = "/dev/disk/by-uuid/${cfg.luksUuid}";
+      preLVM = false;
+      allowDiscards = true;
+    };
+
+    # Mount the unlocked mapper device as btrfs
+    fileSystems.${cfg.mountPoint} = {
+      device = "/dev/mapper/${luksName}";
+      fsType = "btrfs";
+      options = cfg.btrfsOptions;
+    };
+
+    # btrbk — automated snapshot creation and rotation
+    services.btrbk = mkIf cfg.btrbk.enable {
+      instances.poup16t = {
+        onCalendar = cfg.btrbk.schedule;
+        settings = {
+          snapshot_preserve_min = cfg.btrbk.preserveMin;
+          snapshot_preserve = cfg.btrbk.preserve;
+
+          volume.${cfg.mountPoint} = {
+            snapshot_create = "always";
+            snapshot_dir = cfg.btrbk.snapshotDir;
+            subvolume = ".";
+          };
+        };
+      };
+    };
+  };
+}
--- a/modules/nixos/hardware/uconsole-cm5-aio-v2.nix
+++ b/modules/nixos/hardware/uconsole-cm5-aio-v2.nix
@@ -0,0 +1,169 @@
+{ config, lib, pkgs, ... }:
+
+with lib;
+
+let
+  cfg = config.hardware.uconsole-cm5-aio-v2;
+
+  # GPIO pin map matching the AIO v2 board hardware
+  #   SDR  (RTL-SDR):  GPIO 7
+  #   LoRa (SX1262) :  GPIO 16
+  #   USB Hub Interne: GPIO 23
+  #   GPS (GNSS)    :  GPIO 27
+  gpioMap = {
+    GPS  = 27;
+    LORA = 16;
+    SDR  = 7;
+    USB  = 23;
+  };
+
+  # Generate a script that applies boot rail states via pinctrl
+  applyRailsScript = pkgs.writeShellScript "apply-aio-v2-rails" (
+    ''
+      set -e
+      PINCTRL=${pkgs.libraspberrypi}/bin/pinctrl
+    ''
+    + concatStringsSep "" (mapAttrsToList (name: pin: ''
+      if [ "${if cfg.bootRails.${name} then "1" else "0"}" = "1" ]; then
+        echo "AIO v2: ${name} (GPIO${toString pin}) -> ON"
+        $PINCTRL set ${toString pin} op dh
+      else
+        echo "AIO v2: ${name} (GPIO${toString pin}) -> OFF"
+        $PINCTRL set ${toString pin} op dl
+      fi
+    '') gpioMap)
+  );
+
+  # aiov2_ctl CLI tool -- fetched from GitHub, available as `aiov2_ctl`
+  aiov2CtlPkg = pkgs.stdenv.mkDerivation rec {
+    pname = "aiov2_ctl";
+    version = "0-unstable-2026-06-16";
+
+    src = pkgs.fetchFromGitHub {
+      owner = "hackergadgets";
+      repo = "aiov2_ctl";
+      rev = "main";
+      hash = "sha256-hqOvS1K5pDVXAroUE50i5R9YqRgC2U3fzby6uuB67K0=";
+    };
+
+    dontUnpack = true;
+
+    installPhase = ''
+      mkdir -p $out/bin $out/share/aiov2_ctl/img
+      cp $src/aiov2_ctl.py $out/bin/aiov2_ctl
+      chmod +x $out/bin/aiov2_ctl
+      patchShebangs $out/bin/aiov2_ctl
+      substituteInPlace $out/bin/aiov2_ctl \
+        --replace-fail '"/usr/local/share/aiov2_ctl/img/' '"'$out'/share/aiov2_ctl/img/'
+      cp -r $src/img/* $out/share/aiov2_ctl/img/
+    '';
+
+    meta = {
+      description = "HackerGadgets uConsole AIO v2 GPIO control and telemetry tool";
+      homepage = "https://github.com/hackergadgets/aiov2_ctl";
+      license = lib.licenses.mit;
+      maintainers = with lib.maintainers; [ ];
+      platforms = [ "aarch64-linux" ];
+    };
+  };
+in {
+  options.hardware.uconsole-cm5-aio-v2 = {
+    enable = mkEnableOption "HackerGadgets uConsole AIO v2 board support";
+
+    bootRails = {
+      GPS = mkOption {
+        type = types.bool;
+        default = false;
+        description = "Enable GPS module at boot (GPIO 27)";
+      };
+      LORA = mkOption {
+        type = types.bool;
+        default = false;
+        description = "Enable LoRa module at boot (GPIO 16)";
+      };
+      SDR = mkOption {
+        type = types.bool;
+        default = false;
+        description = "Enable SDR module at boot (GPIO 7)";
+      };
+      USB = mkOption {
+        type = types.bool;
+        default = false;
+        description = "Enable internal USB hub at boot (GPIO 23)";
+      };
+    };
+
+    package = mkOption {
+      type = types.package;
+      default = aiov2CtlPkg;
+      defaultText = literalExpression "aiov2CtlPkg";
+      description = "aiov2_ctl package to use";
+    };
+
+    enableGPS = mkOption {
+      type = types.bool;
+      default = false;
+      description = ''
+        Enable GPS UART (/dev/ttyAMA0 at 9600 baud).
+        Requires enabling UART on the CM5 via boot.kernelParams.
+      '';
+    };
+
+    enableGUI = mkOption {
+      type = types.bool;
+      default = false;
+      description = ''
+        Enable the system tray GUI for aiov2_ctl.
+        Requires a desktop environment with system tray support.
+      '';
+    };
+  };
+
+  config = mkIf cfg.enable {
+    # Package the aiov2_ctl tool + pinctrl
+    environment.systemPackages = with pkgs; [
+      cfg.package
+      libraspberrypi      # provides pinctrl
+    ];
+
+    # Boot rail systemd oneshot service
+    systemd.services.aiov2-rails-boot = {
+      description = "Apply AIO v2 GPIO rail boot states";
+      after = [ "local-fs.target" ];
+      wants = [ "local-fs.target" ];
+      before = [ "multi-user.target" ];
+      wantedBy = [ "multi-user.target" ];
+      serviceConfig = {
+        Type = "oneshot";
+        ExecStart = "${applyRailsScript}";
+        RemainAfterExit = true;
+      };
+    };
+
+    # GPS configuration
+    boot.kernelParams = mkIf cfg.enableGPS [ "uart0=on" ];
+
+    users.users = mkIf cfg.enableGPS {
+      gortium = {
+        extraGroups = [ "dialout" ];
+      };
+    };
+
+    # GUI autostart (XDG)
+    systemd.user.services.aiov2-ctl-gui = mkIf cfg.enableGUI {
+      description = "AIO v2 System Tray Controller";
+      after = [ "graphical-session.target" ];
+      wants = [ "graphical-session.target" ];
+      wantedBy = [ "graphical-session.target" ];
+      serviceConfig = {
+        Type = "simple";
+        ExecStart = "${cfg.package}/bin/aiov2_ctl --gui";
+        Restart = "on-failure";
+        RestartSec = 5;
+      };
+      environment = {
+        AIOV2_CTL_DEBUG = "0";
+      };
+    };
+  };
+}
--- a/modules/nixos/services/clamav.nix
+++ b/modules/nixos/services/clamav.nix
@@ -0,0 +1,240 @@
+{ config, lib, pkgs, ... }:
+
+with lib;
+
+let
+  cfg = config.gortium.clamav;
+  clamavPkg = pkgs.clamav;
+
+  clamdConfig = pkgs.writeText "clamd.conf" ''
+    LogFile /var/log/clamav/clamd.log
+    LogTime yes
+    LogVerbose yes
+    LogSyslog yes
+    LocalSocket /run/clamav/clamd.sock
+    TCPSocket 3310
+    TCPAddr 127.0.0.1
+    User clamav
+    AllowSupplementaryGroups yes
+    ${cfg.clamdExtraConfig}
+  '';
+
+  freshclamConfig = pkgs.writeText "freshclam.conf" ''
+    DatabaseDirectory /var/lib/clamav
+    LogFile /var/log/clamav/freshclam.log
+    LogTime yes
+    LogVerbose yes
+    LogSyslog yes
+    User clamav
+    AllowSupplementaryGroups yes
+    ${cfg.freshclamExtraConfig}
+  '';
+
+  # Daily scan — logging only, no auto-quarantine/delete
+  scanScript = pkgs.writeShellScript "clamav-daily-scan" ''
+    set -e
+    PATHS="${concatStringsSep " " cfg.scanPaths}"
+    if [ -z "$PATHS" ]; then
+      echo "No paths configured for daily scan"
+      exit 0
+    fi
+    echo "=== ClamAV daily scan started: $(date) ==="
+    ${clamavPkg}/bin/clamdscan --fdpass --log=/var/log/clamav/daily-scan.log --no-summary $PATHS
+    echo "=== ClamAV daily scan finished: $(date) ==="
+  '';
+in
+{
+  ##### Options #####
+  options.gortium.clamav = {
+    enable = mkEnableOption "ClamAV antivirus — installs clamav CLI tools";
+
+    enableDaemon = mkOption {
+      type = types.bool;
+      default = true;
+      description = ''
+        Run clamd daemon + freshclam updater + daily scheduled scan.
+        Set to false on machines where you only want the CLI tools
+        (clamscan, clamdscan) for manual on-demand scanning.
+      '';
+    };
+
+    onAccessScanning = mkOption {
+      type = types.bool;
+      default = false;
+      description = ''
+        Enable on-access scanning via clamonacc (fanotify-based).
+        Resource-heavy; server use only. Requires enableDaemon = true.
+      '';
+    };
+
+    scanPaths = mkOption {
+      type = types.listOf types.str;
+      default = [
+        "/home"
+        "/nix/store"
+        "/var/lib"
+        "/etc"
+        "/tmp"
+        "/var/tmp"
+      ];
+      description = "Paths for the daily scheduled scan.";
+    };
+
+    dailyScanTime = mkOption {
+      type = types.str;
+      default = "daily";
+      description = ''
+        When to run the daily scan. systemd calendar expression
+        or shortcuts like "daily", "weekly", "04:00".
+      '';
+    };
+
+    clamdExtraConfig = mkOption {
+      type = types.lines;
+      default = "";
+      description = "Extra lines appended to clamd.conf";
+    };
+
+    freshclamExtraConfig = mkOption {
+      type = types.lines;
+      default = "";
+      description = "Extra lines appended to freshclam.conf";
+    };
+  };
+
+  ##### Implementation #####
+  config = mkIf cfg.enable {
+    # 1. Package — always installed when enable = true
+    environment.systemPackages = [ clamavPkg ];
+
+    # Everything below uses mkIf cfg.enableDaemon — conditionalized per attribute
+
+    # 2. Users/groups (only if daemon runs)
+    users.users.clamav = mkIf cfg.enableDaemon {
+      isSystemUser = true;
+      group = "clamav";
+      home = "/var/lib/clamav";
+      createHome = true;
+      description = "ClamAV daemon user";
+    };
+    users.groups.clamav = mkIf cfg.enableDaemon {};
+
+    # 3. Directories (only if daemon runs)
+    systemd.tmpfiles.rules = mkIf cfg.enableDaemon [
+      "d /var/lib/clamav 0750 clamav clamav -"
+      "d /var/log/clamav 0750 clamav clamav -"
+      "d /run/clamav 0755 clamav clamav -"
+    ];
+
+    # 4. ClamAV daemon (clamd)
+    systemd.services.clamav-daemon = mkIf cfg.enableDaemon {
+      description = "ClamAV Anti-Virus Daemon";
+      after = [ "network.target" ];
+      wantedBy = [ "multi-user.target" ];
+      path = [ clamavPkg ];
+
+      preStart = ''
+        mkdir -p /var/lib/clamav /var/log/clamav /run/clamav
+        chown clamav:clamav /var/lib/clamav /var/log/clamav /run/clamav
+      '';
+
+      serviceConfig = {
+        Type = "simple";
+        ExecStart = "${clamavPkg}/bin/clamd --config-file=${clamdConfig}";
+        ExecReload = "${pkgs.coreutils}/bin/kill -HUP $MAINPID";
+        Restart = "on-failure";
+        RestartSec = "10s";
+        User = "clamav";
+        Group = "clamav";
+        RuntimeDirectory = "clamav";
+        RuntimeDirectoryMode = "0755";
+        StateDirectory = "clamav";
+        StateDirectoryMode = "0750";
+        LogsDirectory = "clamav";
+        LogsDirectoryMode = "0750";
+        PrivateTmp = true;
+        ProtectSystem = "strict";
+        ProtectHome = true;
+        ReadWritePaths = [
+          "/var/lib/clamav"
+          "/var/log/clamav"
+          "/run/clamav"
+        ];
+        NoNewPrivileges = true;
+      };
+    };
+
+    # 5. freshclam (database updater) — hourly via timer
+    systemd.services.clamav-freshclam = mkIf cfg.enableDaemon {
+      description = "ClamAV Virus Database Updater";
+      after = [ "network.target" ];
+      wantedBy = [ "multi-user.target" ];
+      path = [ clamavPkg pkgs.curl ];
+
+      serviceConfig = {
+        Type = "oneshot";
+        ExecStart = "${clamavPkg}/bin/freshclam --config-file=${freshclamConfig} --daemon-notify=${clamdConfig}";
+        User = "clamav";
+        Group = "clamav";
+        PrivateTmp = true;
+        ProtectSystem = "full";
+        NoNewPrivileges = true;
+      };
+    };
+    systemd.timers.clamav-freshclam = mkIf cfg.enableDaemon {
+      description = "ClamAV database update timer";
+      wantedBy = [ "timers.target" ];
+      timerConfig = {
+        OnCalendar = "hourly";
+        Persistent = true;
+        RandomizedDelaySec = "1800";
+      };
+    };
+
+    # 6. Daily scan — logging only, no auto-quarantine
+    systemd.services.clamav-daily-scan = mkIf cfg.enableDaemon {
+      description = "ClamAV Daily Scheduled Scan";
+      after = [ "clamav-daemon.service" ];
+      requires = [ "clamav-daemon.service" ];
+      path = [ clamavPkg ];
+
+      serviceConfig = {
+        Type = "oneshot";
+        ExecStart = "${scanScript}";
+        User = "clamav";
+        Group = "clamav";
+        PrivateTmp = true;
+        ProtectSystem = "strict";
+        ReadWritePaths = [ "/var/log/clamav" ];
+      };
+    };
+    systemd.timers.clamav-daily-scan = mkIf cfg.enableDaemon {
+      description = "ClamAV daily scan timer";
+      wantedBy = [ "timers.target" ];
+      timerConfig = {
+        OnCalendar = cfg.dailyScanTime;
+        Persistent = true;
+      };
+    };
+
+    # 7. On-access scanning (clamonacc) — needs enableDaemon
+    systemd.services.clamav-onaccess = mkIf (cfg.enableDaemon && cfg.onAccessScanning) {
+      description = "ClamAV On-Access Scanner (clamonacc)";
+      after = [ "clamav-daemon.service" ];
+      requires = [ "clamav-daemon.service" ];
+      wantedBy = [ "multi-user.target" ];
+      path = [ clamavPkg ];
+
+      serviceConfig = {
+        Type = "simple";
+        ExecStart = "${clamavPkg}/bin/clamonacc --config-file=${clamdConfig} --fdpass --log=/var/log/clamav/clamonacc.log";
+        Restart = "on-failure";
+        RestartSec = "10s";
+        User = "root";  # clamonacc needs root for fanotify
+        Group = "root";
+        PrivateTmp = true;
+        NoNewPrivileges = true;
+      };
+    };
+  };
+}
--- a/modules/nixos/services/default.nix
+++ b/modules/nixos/services/default.nix
@@ -0,0 +1,5 @@
+{
+  imports = [
+    ./systemd
+  ];
+}
--- a/modules/nixos/services/remote-builder.nix
+++ b/modules/nixos/services/remote-builder.nix
@@ -0,0 +1,71 @@
+{ config, lib, pkgs, ... }:
+let
+  cfg = config.services.remoteBuilder;
+in {
+  options.services.remoteBuilder = {
+    enable = lib.mkEnableOption "remote Nix build machine (lazyworkhorse server)";
+
+    buildMachine = {
+      host = lib.mkOption {
+        type = lib.types.str;
+        default = "lazyworkhorse.net";
+        description = "Hostname or IP of the remote build machine.";
+      };
+      sshUser = lib.mkOption {
+        type = lib.types.str;
+        default = "ai-worker";
+        description = "SSH user on the remote build machine.";
+      };
+      port = lib.mkOption {
+        type = lib.types.port;
+        default = 2424;
+        description = "SSH port — added via ~root/.ssh/config since nix.buildMachines has no sshPort option.";
+      };
+      systems = lib.mkOption {
+        type = lib.types.listOf lib.types.str;
+        default = [ "aarch64-linux" "x86_64-linux" ];
+        description = "System types the remote builder can build for.";
+      };
+      maxJobs = lib.mkOption {
+        type = lib.types.int;
+        default = 16;
+        description = "Max parallel jobs on the remote builder.";
+      };
+      supportedFeatures = lib.mkOption {
+        type = lib.types.listOf lib.types.str;
+        default = [ "big-parallel" "nixos-test" "benchmark" ];
+        description = "Features the remote builder supports.";
+      };
+    };
+
+    fallbackLocal = lib.mkOption {
+      type = lib.types.bool;
+      default = true;
+      description = "Fall back to local build when remote builder is unreachable.";
+    };
+  };
+
+  config = lib.mkIf cfg.enable {
+    nix.distributedBuilds = true;
+    nix.buildMachines = [{
+      hostName = cfg.buildMachine.host;
+      sshUser = cfg.buildMachine.sshUser;
+      systems = cfg.buildMachine.systems;
+      maxJobs = cfg.buildMachine.maxJobs;
+      supportedFeatures = cfg.buildMachine.supportedFeatures;
+    }];
+
+    nix.extraOptions = lib.optionalString cfg.fallbackLocal ''
+      builders-use-substitutes = true
+      fallback = true
+    '';
+
+    # SSH config for the remote builder (since nix.buildMachines has no port option)
+    programs.ssh.extraConfig = ''
+      Host ${cfg.buildMachine.host}
+        HostName ${cfg.buildMachine.host}
+        Port ${toString cfg.buildMachine.port}
+        User ${cfg.buildMachine.sshUser}
+    '';
+  };
+}
--- a/modules/nixos/services/staging-vm.nix.bak
+++ b/modules/nixos/services/staging-vm.nix.bak
@@ -0,0 +1,275 @@
+{ config, pkgs, lib, ... }:
+
+with lib;
+
+let
+  cfg = config.services.stagingVm;
+in
+{
+  options.services.stagingVm = {
+    enable = mkOption {
+      type = types.bool;
+      default = false;
+      description = "Enable KVM/libvirt staging VM for compose PR testing";
+    };
+
+    vmName = mkOption {
+      type = types.str;
+      default = "compose-test-vm";
+      description = "Name of the staging VM";
+    };
+
+    memory = mkOption {
+      type = types.str;
+      default = "4096";
+      description = "RAM allocated to the staging VM (MB)";
+    };
+
+    vcpus = mkOption {
+      type = types.int;
+      default = 2;
+      description = "Number of vCPUs for the staging VM";
+    };
+
+    storagePath = mkOption {
+      type = types.str;
+      default = "/var/lib/libvirt/images";
+      description = "Path for libvirt storage pool";
+    };
+
+    dataPath = mkOption {
+      type = types.str;
+      default = "/var/lib/staging-vm";
+      description = "Path for compose test data (PR checkouts, test results)";
+    };
+  };
+
+  config = mkIf cfg.enable {
+    # Enable libvirt daemon
+    virtualisation.libvirtd = {
+      enable = true;
+      qemu = {
+        package = pkgs.qemu_kvm;
+        runAsRoot = true;
+        swtpm.enable = true;
+        ovmf = {
+          enable = true;
+          packages = [ pkgs.OVMFFull.fd ];
+        };
+      };
+    };
+
+    # Kernel modules + groups already handled in configuration.nix
+
+    # libvirt NAT network (192.168.122.0/24)
+    environment.etc."libvirt/qemu/networks/default.xml" = {
+      text = ''
+        <network>
+          <name>default</name>
+          <uuid>2b8f7a3c-9e5d-4a1f-bc3d-6e7a8f9b0c1d</uuid>
+          <forward mode='nat'>
+            <nat>
+              <port start='1024' end='65535'/>
+            </nat>
+          </forward>
+          <bridge name='virbr0' stp='on' delay='0'/>
+          <mac address='52:54:00:12:34:56'/>
+          <ip address='192.168.122.1' netmask='255.255.255.0'>
+            <dhcp>
+              <range start='192.168.122.2' end='192.168.122.254'/>
+            </dhcp>
+          </ip>
+        </network>
+      '';
+      # Autostart the network so it comes up on boot
+      mode = "0644";
+    };
+
+    # Ensure the default network is defined and autostarted
+    systemd.services.libvirtd = {
+      postStart = ''
+        ${pkgs.libvirt}/bin/virsh net-define /etc/libvirt/qemu/networks/default.xml 2>/dev/null || true
+        ${pkgs.libvirt}/bin/virsh net-autostart default 2>/dev/null || true
+        ${pkgs.libvirt}/bin/virsh net-start default 2>/dev/null || true
+      '';
+    };
+
+    # Storage directory for VM images
+    systemd.tmpfiles.rules = [
+      "d ${cfg.storagePath} 0755 root root -"
+      "d ${cfg.dataPath} 0755 root root -"
+    ];
+
+    # Ensure storage pool exists in libvirt
+    systemd.services.libvirtd.postStart = mkAfter ''
+      ${pkgs.libvirt}/bin/virsh pool-define-as default dir --target "${cfg.storagePath}" 2>/dev/null || true
+      ${pkgs.libvirt}/bin/virsh pool-autostart default 2>/dev/null || true
+      ${pkgs.libvirt}/bin/virsh pool-start default 2>/dev/null || true
+    '';
+
+    # Firewall: allow traffic from virbr0 to host and outbound NAT
+    networking.firewall = {
+      extraCommands = ''
+        # Allow inbound DHCP/DNS from libvirt guests
+        iptables -I INPUT -i virbr0 -p udp --dport 67:68 -j ACCEPT
+        iptables -I INPUT -i virbr0 -p tcp --dport 53 -j ACCEPT
+        iptables -I INPUT -i virbr0 -p udp --dport 53 -j ACCEPT
+        
+        # Allow established/related traffic back to guests
+        iptables -I FORWARD -i virbr0 -o virbr0 -j ACCEPT
+        iptables -I FORWARD -o virbr0 -j ACCEPT
+        iptables -I FORWARD -i virbr0 -j ACCEPT
+      '';
+    };
+
+    # Packages needed for VM management
+    environment.systemPackages = with pkgs; [
+      libvirt
+      qemu_kvm
+      virt-manager  # optional GUI for manual management
+      OVMFFull
+      swtpm
+    ];
+
+    # Enable docker in the host (already enabled, but ensure for compose testing)
+    virtualisation.docker.enable = true;
+
+    # Helper script: pr-test-vm
+    # Usage:
+    #   pr-test-vm build    — build the staging VM derivation
+    #   pr-test-vm start    — boot the VM with a compose PR branch
+    #   pr-test-vm stop     — graceful shutdown
+    #   pr-test-vm destroy  — force stop + delete VM
+    #   pr-test-vm ssh      — SSH into the running VM
+    systemd.tmpfiles.rules = mkAfter [
+      "d ${cfg.dataPath}/scripts 0755 root root -"
+    ];
+
+    environment.systemPackages = [ (pkgs.writeShellScriptBin "pr-test-vm" ''
+      set -euo pipefail
+
+      DATA="${cfg.dataPath}"
+      VM_NAME="${cfg.vmName}"
+      VM_IMAGE="''${DATA}/''${VM_NAME}.qcow2"
+      VM_PORT=2223
+
+      build_vm() {
+        echo "==> Building NixOS staging VM for compose testing..."
+        # Build the VM config inline — a minimal NixOS with Docker + SSH
+        cat > /tmp/staging-vm-config.nix << 'NIXEOF'
+          { config, pkgs, lib, ... }: {
+            boot.loader.grub.devices = [ "/dev/vda" ];
+            boot.loader.timeout = 0;
+
+            # Minimal kernel
+            boot.kernelParams = [ "console=ttyS0" ];
+            boot.initrd.kernelModules = [ "virtio_blk" "virtio_net" "virtio_pci" ];
+
+            # SSH access
+            services.openssh = {
+              enable = true;
+              settings.PasswordAuthentication = false;
+              settings.PermitRootLogin = "prohibit-password";
+            };
+
+            # Docker for compose testing
+            virtualisation.docker.enable = true;
+
+            # Network (DHCP via virbr0)
+            networking.useDHCP = true;
+            networking.firewall.enable = false;
+
+            # Users
+            users.users.root.openssh.authorizedKeys.keys = [
+              "$(cat /root/.ssh/authorized_keys 2>/dev/null || echo 'ssh-ed25519 AAAAC3... placeholder')"
+            ];
+            users.users.testrunner = {
+              isNormalUser = true;
+              extraGroups = [ "docker" ];
+              openssh.authorizedKeys.keys = [
+                "$(cat /root/.ssh/authorized_keys 2>/dev/null || echo 'ssh-ed25519 AAAAC3... placeholder')"
+              ];
+            };
+
+            # Git + compose tools
+            environment.systemPackages = with pkgs; [ git docker-compose curl ];
+
+            system.stateVersion = "24.11";
+          }
+        NIXEOF
+
+        nixos-rebuild build-vm -I nixpkgs=channel:nixos-unstable \
+          --arg configuration 'import /tmp/staging-vm-config.nix' \
+          --out-link "''${DATA}/vm-result"
+        echo "==> VM built. Run 'pr-test-vm start' to boot."
+      }
+
+      start_vm() {
+        if [ -f "''${VM_IMAGE}" ]; then
+          echo "==> Booting existing VM..."
+        else
+          echo "==> Creating VM image..."
+          ${pkgs.qemu_kvm}/bin/qemu-img create -f qcow2 "''${VM_IMAGE}" 20G
+        fi
+
+        # Check if already running
+        if ${pkgs.libvirt}/bin/virsh list --name 2>/dev/null | grep -q "''${VM_NAME}"; then
+          echo "==> VM already running."
+          exit 0
+        fi
+
+        ${pkgs.qemu_kvm}/bin/qemu-system-x86_64 \
+          -name "''${VM_NAME}" \
+          -machine q35,accel=kvm \
+          -cpu host \
+          -smp ${toString cfg.vcpus} \
+          -m ${cfg.memory} \
+          -drive file="''${VM_IMAGE}",if=virtio,format=qcow2 \
+          -netdev user,id=net0,hostfwd=tcp::''${VM_PORT}-:22 \
+          -device virtio-net-pci,netdev=net0 \
+          -nographic \
+          -serial mon:stdio \
+          -pidfile "''${DATA}/''${VM_NAME}.pid" \
+          -daemonize
+
+        echo "==> VM booting... SSH on port ''${VM_PORT}"
+        echo "==> Wait for it: ssh -p ''${VM_PORT} testrunner@localhost"
+      }
+
+      stop_vm() {
+        PIDFILE="''${DATA}/''${VM_NAME}.pid"
+        if [ -f "''${PIDFILE}" ]; then
+          PID=$(cat "''${PIDFILE}")
+          kill "''${PID}" 2>/dev/null || true
+          rm -f "''${PIDFILE}"
+          echo "==> VM stopped."
+        else
+          ${pkgs.libvirt}/bin/virsh destroy "''${VM_NAME}" 2>/dev/null || true
+          echo "==> VM destroyed."
+        fi
+      }
+
+      ssh_vm() {
+        exec ssh -p "''${VM_PORT}" -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null "testrunner@localhost" "$@"
+      }
+
+      # Main dispatch
+      case "''${1:-help}" in
+        build)   build_vm ;;
+        start)   start_vm ;;
+        stop)    stop_vm ;;
+        destroy) stop_vm; rm -f "''${VM_IMAGE}"; echo "==> VM deleted." ;;
+        ssh)     shift; ssh_vm "$@" ;;
+        *)
+          echo "Usage: pr-test-vm {build|start|stop|destroy|ssh}"
+          echo ""
+          echo "  build    — build the NixOS VM derivation"
+          echo "  start    — boot the VM (create image if needed)"
+          echo "  stop     — graceful VM shutdown"
+          echo "  destroy  — stop + delete VM image"
+          echo "  ssh      — SSH into the running VM"
+          ;;
+      esac
+    '') ];
+  };
+}
--- a/modules/nixos/services/wireguard-client.nix
+++ b/modules/nixos/services/wireguard-client.nix
@@ -0,0 +1,54 @@
+{ config, lib, pkgs, ... }:
+
+with lib;
+
+let
+  cfg = config.gortium.wireguard-client;
+in
+{
+  ##### Options #####
+  options.gortium.wireguard-client = {
+    enable = mkEnableOption "WireGuard VPN client to lazyworkhorse VPN server";
+
+    vpnIp = mkOption {
+      type = types.str;
+      description = "Assigned VPN IP with CIDR, e.g. \"10.8.0.4/24\"";
+      example = "10.8.0.4/24";
+    };
+
+    privateKeyFile = mkOption {
+      type = types.path;
+      description = "Path to the WireGuard private key (age-encrypted, via agenix)";
+    };
+
+    presharedKeyFile = mkOption {
+      type = types.nullOr types.path;
+      default = null;
+      description = "Path to the WireGuard preshared key (optional, age-encrypted)";
+    };
+  };
+
+  ##### Config #####
+  config = mkIf cfg.enable {
+    networking.wireguard.interfaces = {
+      wg0 = {
+        ips = [ cfg.vpnIp ];
+        privateKeyFile = cfg.privateKeyFile;
+
+        peers = [
+          {
+            # Server public key (lazyworkhorse wg-easy)
+            publicKey = "rY9zII3AOm8rog2rv02PyA3Bq7zdvTOGkZapfCV1DkE=";
+            presharedKeyFile = cfg.presharedKeyFile;
+            # Split-tunnel: only route the VPN subnet
+            allowedIPs = [ "10.8.0.0/24" ];
+            endpoint = "vpn.lazyworkhorse.net:51820";
+            persistentKeepalive = 25;
+          }
+        ];
+      };
+    };
+
+    environment.systemPackages = with pkgs; [ wireguard-tools ];
+  };
+}
--- a/overlays/reticulum.nix
+++ b/overlays/reticulum.nix
@@ -0,0 +1,81 @@
+final: prev: let
+  python3 = final.python3;
+  pyPkgs = python3.pkgs;
+in {
+  reticulumStack = python3.pkgs.buildPythonApplication rec {
+    pname = "reticulum";
+    version = "1.2.9";
+    format = "setuptools";
+    src = pyPkgs.fetchPypi {
+      pname = "rns";
+      inherit version;
+      sha256 = "554814231c237b9caacf8df669312e57dd7d3f84b6d4810125087d1a79a75d75";
+    };
+    propagatedBuildInputs = with pyPkgs; [ cryptography pyserial ];
+    doCheck = false;
+    pythonImportsCheck = [ "RNS" ];
+    meta = with final.lib; {
+      description = "Self-configuring, encrypted and resilient mesh networking stack";
+      homepage = "https://reticulum.network/";
+      license = licenses.mit;
+      platforms = platforms.linux;
+    };
+  };
+
+  lxmf = python3.pkgs.buildPythonApplication rec {
+    pname = "lxmf";
+    version = "0.9.8";
+    format = "setuptools";
+    src = pyPkgs.fetchPypi {
+      inherit pname version;
+      sha256 = "30f39f3a975a049c12ee2cfceb3261d24cb5adec881c6821f7354464b3f3650c";
+    };
+    propagatedBuildInputs = [ final.reticulumStack ];
+    doCheck = false;
+    pythonImportsCheck = [ "LXMF" ];
+    meta = with final.lib; {
+      description = "Lightweight Extensible Message Format for Reticulum";
+      homepage = "https://github.com/markqvist/lxmf";
+      license = licenses.mit;
+      platforms = platforms.linux;
+    };
+  };
+
+  nomadnet = python3.pkgs.buildPythonApplication rec {
+    pname = "nomadnet";
+    version = "1.1.1";
+    format = "setuptools";
+    src = pyPkgs.fetchPypi {
+      inherit pname version;
+      sha256 = "fa13b64a10e75b705a58024815ab72451700aa726af96d415ba99dec28dfc40a";
+    };
+    propagatedBuildInputs = with pyPkgs; [ final.reticulumStack final.lxmf urwid qrcode ];
+    doCheck = false;
+    pythonImportsCheck = [ "nomadnet" ];
+    meta = with final.lib; {
+      description = "Nomad Network — resilient mesh communications platform";
+      homepage = "https://github.com/markqvist/NomadNet";
+      license = licenses.mit;
+      platforms = platforms.linux;
+    };
+  };
+
+  rnsh = python3.pkgs.buildPythonApplication rec {
+    pname = "rnsh";
+    version = "0.1.7";
+    format = "setuptools";
+    src = pyPkgs.fetchPypi {
+      inherit pname version;
+      sha256 = "9cb72f25abb1c6d300f8014b264184ff78f592fe88e36094938012990b797c93";
+    };
+    propagatedBuildInputs = [ final.reticulumStack ];
+    doCheck = false;
+    pythonImportsCheck = [ "rnsh" ];
+    meta = with final.lib; {
+      description = "Remote shell over Reticulum";
+      homepage = "https://github.com/acehoss/rnsh";
+      license = licenses.mit;
+      platforms = platforms.linux;
+    };
+  };
+}
--- a/patches/0008-panel-cwu50-fix-init-seq1.patch
+++ b/patches/0008-panel-cwu50-fix-init-seq1.patch
@@ -0,0 +1,19 @@
+--- a/drivers/gpu/drm/panel/panel-cwu50.c
+++ b/drivers/gpu/drm/panel/panel-cwu50.c
+@@ -58,5 +58,8 @@
+ 	dcs_write_seq(0x72,0x06);
+ 	dcs_write_seq(0x75,0x03);
+	/* DSI_INIT0: set 4 lanes (bits[1:0]=11) */
+	dcs_write_seq(0x80,0x03);
+ 	dcs_write_seq(0xE0,0x01);
+
+ 	dcs_write_seq(0x00,0x00);
+ 	dcs_write_seq(0x01,0x47);//VCOM0x47
+@@ -721,6 +723,6 @@
+ 	dsi->lanes = 4;
+ 	dsi->format = MIPI_DSI_FMT_RGB888;
+-	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
+ 
+ 	ctx->id_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_IN);
+ 	if (IS_ERR(ctx->id_gpio)) {
--- a/1
+++ b/1
@@ -0,0 +1 @@
+/nix/store/7y7rfksqcf5smz59jjixyl56bxq50j9g-nixos-system-uConsole-25.11.20260608.e820eb4
--- a/secrets/gortium_password.age
+++ b/secrets/gortium_password.age
@@ -0,0 +1,10 @@
+-----BEGIN AGE ENCRYPTED FILE-----
+YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IHNzaC1lZDI1NTE5IEdoTUQ4QSA4MlFz
+SHFjYjJMVHRlTWNGVGI2bHQxc0xRd2tlaExlM0NFMWhlbkR2bVg0CkxxenVTaXkr
+eWxybDdCeUM0ejRvZWI4cFZCWm5VczRvZkNnT0d5Y1oyYmsKLT4gK1NmRzVtLWdy
+ZWFzZSB3UDI6TyNaCnF4Ylk0QWduaXZxRFBFbDBOZ0dxeGxiWTVCYjRtZTJBRkFC
+YU5qaytYWWI4OWl1K1FSdXNlY2JXZjkzak9tTHkKVFlCRlRqY1FVSzFmNS9yZmxF
+aEUxelUwNEpKN3VXYi9KUWN4bXFscm5oUEFOajhRZDlERWVYcFgvQQotLS0gK1JI
+VERTQjB6d1k3NDQwbjNveXBqcFk1WE96cHlaTTVkTWRMZENPamFJZwpcT1CP/KvU
+CsunvfX9RBlSSKuw4eem9N9s3JqJNj4FRQizNx6QzlE1vSME
+-----END AGE ENCRYPTED FILE-----
--- a/secrets/secrets.nix
+++ b/secrets/secrets.nix
@@ -8,8 +8,9 @@ let
 in
 {
  "containers.env.age".publicKeys = authorizedKeys;
+  "gortium_password.age".publicKeys = authorizedKeys;
+  "home_wifi.age".publicKeys = authorizedKeys;
  "lazyworkhorse_host_ssh_key.age".publicKeys = authorizedKeys;
  "n8n_ssh_key.age".publicKeys = authorizedKeys;
  "openclaw_gateway_token.age".publicKeys = authorizedKeys;
-  "home_wifi.age".publicKeys = authorizedKeys;
 }
--- a/users/ai-worker/ai-worker.nix
+++ b/users/ai-worker/ai-worker.nix
@@ -22,7 +22,6 @@
  #   - NO access to infra repo (no bind mount)
  #   - NO sudo access (no nh, nixos-rebuild, nixpkgs-fmt, nix)
  # WORKFLOW: SSH from Hermes container, run docker benchmarks, return and save results to /opt/data/ai-optimizer/
-  services.aiWorkerAccess = true;
  
  # Restricted sudo for ai-worker - security checks only
  security.sudo.extraRules = [
--- a/users/gortium/gortium.nix
+++ b/users/gortium/gortium.nix
@@ -1,4 +1,6 @@
 { pkgs, inputs, config, keys, ... }: {
+  home-manager.extraSpecialArgs = { inherit (config.networking) hostName; dotfiles = ../../assets/dotfiles; };
+  home-manager.users.gortium = import ./home.nix;
  users.users.gortium = {
    isNormalUser = true;
    extraGroups = [ "wheel" "docker" "video" "render"];
@@ -6,9 +8,10 @@
    packages = with pkgs; [
      tree
      btop
-      nh
    ];
    shell = pkgs.zsh;
+    passwordFile = config.age.secrets.gortium_password.path;
+    ignoreShellProgramCheck = true;
    openssh.authorizedKeys.keys = [
      keys.users.gortium.main
    ];
--- a/users/gortium/home.nix
+++ b/users/gortium/home.nix
@@ -0,0 +1,65 @@
+{ pkgs, lib, config, inputs, hostName, ... }:
+
+let
+  dotfiles = ../../assets/dotfiles;
+  isUconsole = hostName == "uConsole";
+in {
+  home.username = "gortium";
+  home.homeDirectory = "/home/gortium";
+  home.stateVersion = "23.11";
+  programs.home-manager.enable = true;
+
+  home.file = {
+    # tmux
+    ".tmux.conf".source = "${dotfiles}/tmux/.tmux.conf";
+
+    # kitty
+    ".config/kitty/kitty.conf".source = "${dotfiles}/kitty/.config/kitty/kitty.conf";
+
+    # nvim
+    ".config/nvim/init.lua".source = "${dotfiles}/nvim/.config/nvim/init.lua";
+
+    # starship
+    ".config/starship.toml".source = "${dotfiles}/starship/.config/starship.toml";
+
+    # btop
+    ".config/btop/btop.conf".source = "${dotfiles}/btop/.config/btop/btop.conf";
+
+    # waybar
+    ".config/waybar/style.css".source = "${dotfiles}/waybar/.config/waybar/style.css";
+    ".config/waybar/config.jsonc".source = "${dotfiles}/waybar/.config/waybar/config.jsonc";
+
+    # wofi
+    ".config/wofi/style.css".source = "${dotfiles}/wofi/.config/wofi/style.css";
+    ".config/wofi/config".source = "${dotfiles}/wofi/.config/wofi/config";
+
+    # yazi
+    ".config/yazi/yazi.toml".source = "${dotfiles}/yazi/.config/yazi/yazi.toml";
+
+    # hyprland — common config
+    ".config/hypr/hyprland.conf".source = "${dotfiles}/hypr/.config/hypr/hyprland.conf";
+    ".config/hypr/hypridle.conf".source = "${dotfiles}/hypr/.config/hypr/hypridle.conf";
+    ".config/hypr/hyprlock.conf".source = "${dotfiles}/hypr/.config/hypr/hyprlock.conf";
+    ".config/hypr/hyprpaper.conf".source = "${dotfiles}/hypr/.config/hypr/hyprpaper.conf";
+    ".config/hypr/mocha.conf".source = "${dotfiles}/hypr/.config/hypr/mocha.conf";
+
+    # hyprland — host-specific monitor config
+    ".config/hypr/host/monitors.conf".source =
+      if isUconsole
+      then "${dotfiles}/hypr/.config/hypr/hosts/uconsole.conf"
+      else "${dotfiles}/hypr/.config/hypr/hosts/laptop.conf";
+  };
+
+  home.packages = with pkgs; [
+    git zsh tmux starship
+    neovim kitty
+    btop yazi ripgrep fd fzf
+  ] ++ lib.optionals (!isUconsole) [
+    waybar wofi swww hyprshot
+  ] ++ lib.optionals isUconsole [
+    brightnessctl
+  ];
+
+  programs.zsh.enable = true;
+  programs.starship.enable = true;
+}
Author	SHA1	Message	Date
Hermes	1b70f95038	fix: remove gpsbabel for aarch64 cross-compile (qmake can't find g++)	2026-06-20 11:56:31 -04:00
Hermes	9f62dac106	uConsole: remove wsjtx + fldigi (qtbase/Qt5 linker fails) — add to removal comment	2026-06-19 22:38:08 -04:00
Hermes	a8215ae441	uConsole: remove accidental .bak file from tracking	2026-06-19 22:22:16 -04:00
Hermes	eeb345b7e0	uConsole: add neovim to cross-compile removal tracking comment	2026-06-19 22:22:13 -04:00
Hermes	95833f4d28	uConsole: fix missing closing brace (sed cleanup mishap)	2026-06-19 22:14:46 -04:00
Hermes	93dc4f1cac	uConsole: consolidate removal tracking into single block	2026-06-19 22:13:18 -04:00
Hermes	12af6bb643	uConsole: remove failing cross-compile packages (round 3) Removed for aarch64 bootstrap: sdrpp — glfw/wxPython cross-compile fails gqrx — Qt5 cascade fails emacs-pgtk/nox — GTK3 + mailutils → gss → shishi chain viking — GTK3 GPS foxtrotgps — GTK2 GPS Leave remaining as native install after first switch. Add consolidated removal tracking comment.	2026-06-19 22:11:39 -04:00
Hermes	e734102104	uConsole: remove clamav (cross-compile failure — cmake try_run + Rust proc-macro linker)	2026-06-19 12:20:44 -04:00
Hermes	e54812c3c5	fix: add native gcc for clamav Rust build scripts in cross-compile	2026-06-19 12:13:37 -04:00
Hermes	42949532a3	fix: set CC=gcc for clamav Rust proc-macro builds in cross-compile	2026-06-19 12:09:33 -04:00
Hermes	a0875e9e0a	fix: add clamav cross-compile workaround (cmake try_run for FD passing, uname POSIX, struct packing, SAR)	2026-06-19 07:54:30 -04:00
Hermes	016cf4aa53	uConsole: remove hashcat (cross-compile failure — Makefile calls gcc directly, same issue as neovim)	2026-06-19 07:37:59 -04:00
Hermes	a114cd859c	docs: correct maxJobs in remote builder notes (uConsole=4, server=36)	2026-06-18 23:36:04 -04:00
Hermes	317e908ab5	docs: add bidirectional remote builder setup notes to flake	2026-06-18 23:15:55 -04:00
Hermes	ef8c92f05e	docs: note neovim cross-compile failure in overlay comments	2026-06-18 23:02:13 -04:00
Hermes	8874f6ff66	feat: add gortium.clamav NixOS module - New module at modules/nixos/services/clamav.nix - Options: enable (CLI-only), enableDaemon (full services), onAccessScanning (clamonacc), scanPaths, dailyScanTime - All scans are logging-only — no auto-quarantine or deletion - uConsole: CLI tools only (enableDaemon=false) - lazyworkhorse: full setup with on-access scanning, daily 3 AM scan Also: remove neovim from uConsole (fails cross-compile, emacs available)	2026-06-18 21:53:33 -04:00
Hermes	f14c74f50f	feat: add ClamAV antivirus with daily auto-scan	2026-06-18 21:26:14 -04:00
Hermes	570ab16243	docs: add comprehensive cross-compile workaround tracker in overlay comment	2026-06-18 21:16:56 -04:00
Hermes	b072e2052f	fix: remove js8call + switch wireshark to CLI to drop qtquick3d dep	2026-06-18 21:13:31 -04:00
Hermes	16b9b1c866	fix: use dontUseCmakeInstall + stub for qtquick3d cross-compile	2026-06-18 21:07:37 -04:00
Hermes	4acd98c689	fix: stub qtquick3d install for aarch64 cross-compile (Qt::Quick unavailable)	2026-06-18 21:04:23 -04:00
Hermes	c8eb80b7f8	fix: disable mailutils in emacs-pgtk to avoid broken gss cross-compile	2026-06-18 20:59:39 -04:00
Hermes	e6d1b1bdab	fix: remove broken perl-ldap hacks, keep only john perl-ldap filter	2026-06-18 20:40:29 -04:00
Hermes	e5188eb5b0	fix: strip perl-ldap from john deps in cross-compile overlay	2026-06-18 20:39:50 -04:00
Hermes	9be5583750	fix: try final.buildPackages.perl for perl.mini cross-compile fix	2026-06-18 20:39:50 -04:00
Hermes	533de87069	fix: replace perl.mini with native build perl for cross-compile (fixes all perl modules)	2026-06-18 20:39:50 -04:00
Hermes	0772daf3ed	fix: try null perl for perl-ldap cross-compile	2026-06-18 17:25:39 -04:00
Hermes	bf9b3a7890	fix: proper perl-ldap cross-compile override	2026-06-18 17:25:06 -04:00
Hermes	d9e56e8958	fix: force perl-ldap to use buildPackages perl for cross-compile	2026-06-18 17:23:59 -04:00
Hermes	c6fd58123e	fix: remove sshPort from buildMachines (use SSH config instead)	2026-06-18 17:20:38 -04:00
Hermes	932de1752d	fix: place agenix-rekey config inside module (was outside closing brace)	2026-06-18 17:19:29 -04:00
Hermes	050f2d4761	feat: add agenix-rekey config + remote builder to uConsole	2026-06-18 17:17:29 -04:00
Hermes	da691f0b4d	feat: add agenix-rekey + remote-builder module for distributed builds	2026-06-18 17:17:03 -04:00
Hermes	ef3ad6bbcf	fix: disable Boost MPI for aarch64 cross-compile (no b2 alternatives)	2026-06-18 17:09:59 -04:00
Hermes	7e148791fb	remove meshtastic (not in nixpkgs)	2026-06-18 16:58:56 -04:00
Hermes	65241113cc	fix: add reticulum overlay to uconsole nixpkgs	2026-06-18 15:23:59 -04:00
Hermes	4989f9898c	feat: merge Reticulum overlay, poup-16t-disk, open_code_server, merged uConsole config	2026-06-18 15:23:06 -04:00
Hermes	ecbf226b01	temp: remove nh to skip Haskell cross-compile	2026-06-17 20:24:22 -04:00
Hermes	09add9f5e4	fix: remove duplicate extraSpecialArgs in gortium.nix	2026-06-17 08:30:01 -04:00
Hermes	b4b928a985	fix: clean module and flake after merge	2026-06-17 08:29:24 -04:00
Hermes	33e98f32d7	feat: add HackerGadgets AIO v2 board module + enable on uConsole CM5	2026-06-17 08:27:15 -04:00
Thierry Pouplier	332f1cca1a	chore: update nixos-uconsole flake.lock to latest pr/dcs-panel-detection	2026-06-17 08:27:01 -04:00
Hermes	102586d7e8	fix: switch nixos-uconsole to cm5_fix branch (patches OK) - Remove local boot.kernelPatches (now in nixos-uconsole fork) - Point to github:gortium/nixos-uconsole/cm5_fix instead of pr/dcs-panel-detection	2026-06-16 19:21:54 -04:00
Hermes	43f8d8a61c	fix: correct aiov2_ctl hash from actual build	2026-06-16 19:12:37 -04:00
Hermes	6aca5466b6	fix: convert hash to proper SRI base64 format	2026-06-16 19:11:43 -04:00
Hermes	f0ec375875	fix: set real hash for aiov2_ctl fetchFromGitHub	2026-06-16 19:11:00 -04:00
Hermes	e05ef66b8f	fix: correct secrets path in configuration.nix (../../secrets from hosts/uconsole-cm5/)	2026-06-16 19:09:24 -04:00
Hermes	a2096efc3f	fix: correct dotfiles path in home.nix (relative to repo root)	2026-06-16 19:08:49 -04:00
Hermes	088a82d730	fix: pass hostName as extraSpecialArgs to home-manager home.nix used config.networking.hostName but home-manager modules don't have access to NixOS config. Fix by passing via extraSpecialArgs.	2026-06-16 19:08:15 -04:00
Hermes	b9e89ce537	fix: use libraspberrypi instead of raspberrypi-tools for pinctrl	2026-06-16 19:07:34 -04:00
Hermes	1d50b6455d	fix: zsh conflicts for gortium home-manager on uConsole - Remove duplicate .zshrc from home.file (managed by programs.zsh) - Enable programs.zsh system-wide for gortium user	2026-06-16 19:06:44 -04:00
Hermes	bcf924408b	fix: remove programs.gitsign (not available in nixpkgs 25.11)	2026-06-16 19:06:11 -04:00
Hermes	820de72c0f	fix: remove duplicate ai-worker user definition in configuration.nix ai-worker is now defined in users/ai-worker/ai-worker.nix module	2026-06-16 19:05:03 -04:00
Hermes	6c08958730	fix: add ai-worker-restricted module to uConsole CM5 base modules Required for services.aiWorkerAccess option used by users/ai-worker/ai-worker.nix	2026-06-16 19:04:35 -04:00
Hermes	3f331e4bfb	fix: add home-manager input for uConsole CM5 gortium user config The remote branch added users/gortium/gortium.nix which uses home-manager module option, but home-manager wasn't imported.	2026-06-16 19:03:59 -04:00
Hermes	1550219e77	Merge remote changes + feat: AIO v2 board module - Cross-compile overlays for Hyprland (libcamera, pipewire, gjs) - Refactor uconsoleBaseModules into reusable list - Add wireguard-client service module - Restructure users into subdirectories - New: hardware.uconsole-cm5-aio-v2 module (GPIO rails, aiov2_ctl, GPS UART) - Update configuration.nix with Hyprland + AIO v2 - Add AIO v2 module to both toplevel and SD image config	2026-06-16 19:02:38 -04:00
Hermes	2572f47e41	feat: add NixOS module for HackerGadgets AIO v2 board (uConsole CM5) - New module: hardware.uconsole-cm5-aio-v2 - GPIO rail control for GPS (27), LORA (16), SDR (7), USB (23) - Systemd oneshot service (aiov2-rails-boot) to apply states at boot - aiov2_ctl CLI tool packaged from GitHub source - GPS UART support (ttyAMA0, 9600 baud) with dialout group - Optional systemd user service for system tray GUI - Wired into uconsole-cm5 NixOS config + SD image All rails default OFF — activate on demand with: aiov2_ctl <GPS\|LORA\|SDR\|USB> on	2026-06-16 19:00:50 -04:00
Thierry Pouplier	bd8b1c564e	feat: add reusable wireguard-client NixOS module - modules/nixos/services/wireguard-client.nix — optional module under gortium.wireguard-client namespace with enable, vpnIp, privateKeyFile, and presharedKeyFile options - Added to lazyworkhorse, cyt-pi, and uconsoleBaseModules (covers both uconsole-cm5 toplevel and SD image) - Migrated lazyworkhorse from inline networking.wireguard to module - Split-tunnel: allowedIPs = [ "10.8.0.0/24" ] Usage in a host config: gortium.wireguard-client = { enable = true; vpnIp = "10.8.0.X/24"; privateKeyFile = config.age.secrets.wireguard_private_key.path; presharedKeyFile = config.age.secrets.wireguard_preshared_key.path; };	2026-06-15 10:55:40 -04:00
Thierry Pouplier	bd283de350	fix: place passwordFile at correct attrset level in gortium.nix	2026-06-14 21:58:57 -04:00
Thierry Pouplier	a6d88f2d41	Moved user ai-worker	2026-06-14 21:57:44 -04:00
Thierry Pouplier	6399196a2c	fix: move gortium passwordFile to shared user module (applies to all hosts)	2026-06-14 21:55:48 -04:00
Thierry Pouplier	8651295b0a	Fixed stuff maybe i guess not sure	2026-06-14 21:48:23 -04:00
Thierry Pouplier	e991359584	add gortium password age secret	2026-06-14 21:34:42 -04:00
Thierry Pouplier	fba52fa66d	fix: use passwordFile instead of hashedPasswordFile (matches other secrets: plain text)	2026-06-14 21:09:10 -04:00
Thierry Pouplier	e95baddb96	rename users/gortium/default.nix -> gortium.nix, add to uconsole modules	2026-06-14 21:05:22 -04:00
Thierry Pouplier	eb3fe42542	refactor: extract shared uconsole modules to eliminate toplevel/image duplication	2026-06-14 20:56:17 -04:00
Thierry Pouplier	cdbb7de04d	fix: properly structure uConsole config (ai-worker, gortium password, age secret)	2026-06-14 19:56:33 -04:00
Thierry Pouplier	9004163891	feat: add agenix secret for gortium password on uConsole - Add gortium_password.age entry in secrets.nix - Add age.secrets.gortium_password in uConsole config - Add hashedPasswordFile to existing gortium user - Add ai-worker user for Hermes SSH access	2026-06-14 19:53:40 -04:00
Thierry Pouplier	f06d9028f0	feat: add ai-worker user to uConsole for Hermes SSH access	2026-06-14 19:52:11 -04:00
Thierry Pouplier	8423a121eb	rename host/ -> hosts/ in dotfiles submodule	2026-06-14 19:41:58 -04:00
Thierry Pouplier	7238e9d45c	update dotfiles submodule: per-host hyprland config	2026-06-14 19:37:35 -04:00
Thierry Pouplier	f344739b94	feat: per-host Hyprland monitor config via home-manager - Split hyprland.conf into common (keybinds, looks, animations) and per-host (monitors, env, workspaces) configs - Add uconsole.conf for CM5 DSI display (720x1280) - Add laptop.conf for NVIDIA + external monitors - home.nix links the correct host config based on hostname - Remove NVIDIA env vars from common config	2026-06-14 19:37:14 -04:00
Thierry Pouplier	02ffcdb55e	feat: add dotfiles submodule and home-manager config - Add dotfiles repo as submodule in assets/dotfiles/ - Rewrite home.nix with direct file references instead of stow service - Remove old custom dotfiles.nix service (replaced by home-manager) - Clean up services/default.nix import	2026-06-14 19:22:27 -04:00
Thierry Pouplier	ce7f74c66f	remove hyperspace files accidentally committed from feat/hyperspace-pods-module These files were mixed into commit `16acc6a` which was intended to only fix SSH options for the uConsole configuration.	2026-06-14 18:58:35 -04:00
Thierry Pouplier	f5d1732346	Merge remote-tracking branch 'origin/home_manager' into uconsole-cm5-incremental # Conflicts: # flake.lock # flake.nix # modules/nixos/services/default.nix	2026-06-14 18:53:53 -04:00
Thierry Pouplier	2ee616839e	chore: point nixos-uconsole input to pr/dcs-panel-detection branch	2026-06-14 18:43:04 -04:00
Thierry Pouplier	42202c8a40	fix: add hyprwayland-scanner native paths for xdg-desktop-portal-hyprland cross-compile	2026-06-14 10:11:44 -04:00
Thierry Pouplier	2476352fdf	fix: skip hyprland qtutils (Qt6Quick missing in aarch64 cross-compile) Qt6Quick and its submodules are not built in the aarch64 qtdeclarative cross-compile output. hyprland-qt-support can't find them and fails. Hyprland only needs qtutils at runtime (added to PATH via wrapProgram). Setting wrapRuntimeDeps = false skips the wrapping entirely, letting Hyprland build without its QML UI support package.	2026-06-14 10:01:28 -04:00
Thierry Pouplier	8afca7315d	fix: correct qtdeclarative attr to qt6.qtdeclarative	2026-06-14 09:56:31 -04:00
Thierry Pouplier	0372b37950	fix: set Qt6Qml_DIR for hyprland-qt-support cross-compile	2026-06-14 09:52:35 -04:00
Thierry Pouplier	11a4969028	fix: skip GTK tests in gjs cross-compile for Hyprland	2026-06-14 09:30:50 -04:00
Thierry Pouplier	6a1c26cac2	fix: remove libcamera from pipewire buildInputs (both overlays) meta.platforms = [] on libcamera doesn't help because nixos-25.11 pipewire has libcamera unconditionally in buildInputs. Must overrideAttrs to: - filter libcamera out of buildInputs - clear existing libcamera meson flags and set -Dlibcamera=disabled	2026-06-14 09:03:44 -04:00
Thierry Pouplier	9978ea36f4	fix: disable libcamera in pipewire via mesonFlags for both pkgs and rpi	2026-06-14 00:56:31 -04:00
Thierry Pouplier	f00477dacc	fix: force -Dlibcamera=disabled in pipewire mesonFlags for cross-compile	2026-06-14 00:16:09 -04:00
Thierry Pouplier	86d8b7bf8b	fix: disable libcamera in pipewire for cross-compile (rpi-pisp blocks)	2026-06-13 23:45:58 -04:00
Hermes	67aafe37db	fix: add DSI_INIT0 lane config to old panel init seq + fix mode_flags	2026-06-13 18:59:29 -04:00
Hermes	cb2b535fde	fix: correct patch format — blank line between hunks	2026-06-13 18:51:39 -04:00
Hermes	2c9136d1dc	fix: add DSI_INIT0 lane config to old panel init_sequence + fix mode_flags	2026-06-13 18:49:36 -04:00
Hermes	6fac886598	revert: remove failed CWU50 display fix patches	2026-06-13 18:04:06 -04:00
Hermes	a4f4891236	try: no-burst-no-sync-pulse (VIDEO only)	2026-06-13 17:12:51 -04:00
Hermes	3a809938c9	try: no-sync-pulse variant (keep BURST, remove SYNC_PULSE)	2026-06-13 16:38:24 -04:00
Hermes	0f765d99cb	feat: add CWU50 display patch (no-burst) + fix flake syntax Remove extra '};' that broke flake.nix parsing. Apply kernel patch '0008-panel-cwu50-no-burst.patch' to remove MIPI_DSI_MODE_VIDEO_BURST flag in panel-cwu50.c. Switch nixos-uconsole module to consolidated uconsole-cm5 module. Keep patches/0008-panel-cwu50-remove-sync-pulse.patch as variant.	2026-06-13 16:27:32 -04:00
Hermes	4d8087badf	fix: apply DSI burst mode fix as kernel patch overlay	2026-06-13 13:47:35 -04:00
Thierry Pouplier	1ca58d3da3	Merge branch 'master' into home_manager	2025-08-24 22:26:12 -04:00
Thierry Pouplier	0ca7a74653	WIP on home manager	2025-08-19 17:32:38 -04:00
				`@@ -0,0 +1 @@`
				`/nix/store/7y7rfksqcf5smz59jjixyl56bxq50j9g-nixos-system-uConsole-25.11.20260608.e820eb4`