fix: update compose submodule for network creation fix

- Submodule now creates networks as bridge instead of external
- Resolves backup_stack startup failure due to missing backup_net

AGENTS.md

@@ -5,7 +5,6 @@ This document outlines the development conventions for this NixOS-based infrastr
 ## Build & Deployment
 
 - **Build/Deploy:** Use `nixos-rebuild switch --flake .#<hostname>` to build and deploy the configuration for a specific host.
-- **CRITICAL — Validate before pushing:** Always `nix build --no-link '.#nixosConfigurations.<hostname>.config.system.build.toplevel'` (or `nh os build`) and confirm it succeeds before pushing any changes. Never push untested NixOS configs.
 - **Development Shell:** Activate the development environment with `nix develop`.
 
 ## Linting & Formatting

hosts/lazyworkhorse/configuration.nix

@@ -36,7 +36,7 @@
     "transparent_hugepage=always" # because mucho ram
   ];
   # 2. Load the specific drivers found by sensors-detect
-  boot.kernelModules = [ "nct6775" "lm96163" "iptable_nat" "iptable_filter" ];
+  boot.kernelModules = [ "nct6775" "lm96163" ];
   # 3. Force the nct6775 driver to recognize the chip if it's stubborn
   boot.extraModprobeConfig = ''
     options nct6775 force_id=0xd280
@@ -49,27 +49,6 @@
   networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
   networking.hostId = "deadbeef";
 
-  # WireGuard VPN client -- always up, connects to wg-easy server
-  # Create age-encrypted secrets before deploying (run on the host):
-  #   echo -n "<private_key>" | agenix -e secrets/wireguard_private_key.age
-  #   echo -n "<preshared_key>" | agenix -e secrets/wireguard_preshared_key.age
-  networking.wireguard.interfaces = {
-    wg0 = {
-      ips = [ "10.8.0.3/24" ];
-      privateKeyFile = config.age.secrets.wireguard_private_key.path;
-      peers = [
-        {
-          publicKey = "rY9zII3AOm8rog2rv02PyA3Bq7zdvTOGkZapfCV1DkE=";
-          presharedKeyFile = config.age.secrets.wireguard_preshared_key.path;
-          allowedIPs = [ "10.8.0.0/24" ];
-          endpoint = "vpn.lazyworkhorse.net:51820";
-          persistentKeepalive = 25;
-        }
-      ];
-      dns = [ "1.1.1.1" "8.8.8.8" ];
-    };
-  };
-
   # Set your time zone.
   time.timeZone = "America/Montreal";
 
@@ -179,7 +158,7 @@
     settings = {
       PasswordAuthentication = false;
       KbdInteractiveAuthentication = false;
-      # Additional hardening settings below in SERVER HARDENING section
+      PermitRootLogin = "prohibit-password"; 
     };
     hostKeys = [
       {
@@ -242,11 +221,6 @@
       path = self + "/assets/compose/homepage";
     };
 
-    vpn = {
-      path = self + "/assets/compose/vpn";
-      envFile = config.age.secrets.containers_env.path;
-    };
-
     # tak = {
     #   path = self + "/assets/compose/tak";
     # };
@@ -290,20 +264,6 @@
         mode = "0440";
         path = "/run/secrets/openclaw_gateway_token";
       };
-      wireguard_private_key = {
-        file = ../../secrets/wireguard_private_key.age;
-        owner = "root";
-        group = "root";
-        mode = "0400";
-        path = "/run/secrets/wireguard_private_key";
-      };
-      wireguard_preshared_key = {
-        file = ../../secrets/wireguard_preshared_key.age;
-        owner = "root";
-        group = "root";
-        mode = "0400";
-        path = "/run/secrets/wireguard_preshared_key";
-      };
     };
   };
 
@@ -348,196 +308,6 @@
   # Or disable the firewall altogether.
   # networking.firewall.enable = false;
 
-  # =============================================================================
-  # SERVER HARDENING - Firewall, Fail2ban, SSH, Kernel
-  # =============================================================================
-  
-  # Firewall - default deny, explicit allow
-  networking.firewall = {
-    # Enable firewall with default deny policy (NixOS firewall denies all by default)
-    enable = true;
-    allowPing = true;
-    
-    # Only essential ports exposed to internet
-    allowedTCPPorts = [
-      2424  # SSH (non-standard port)
-      2222  # Gitea (version control)
-      80    # HTTP (Traefik redirect)
-      443   # HTTPS (Traefik)
-      # 8000  # Portainer - REVIEW: internal only?
-      # 4242  # Coms - REVIEW: internal only?
-      # 5000  # TAK API - REVIEW: internal only?
-      # 8087  # TAK Connect - REVIEW: internal only?
-      # 8089  # TAK Management - REVIEW: internal only?
-    ];
-    
-    allowedUDPPorts = [
-      51820 # WireGuard VPN
-    ];
-    
-    # Rate limiting and attack prevention
-    extraCommands = ''
-      # Rate limit SSH connections (max 4 new connections per 60 seconds)
-      iptables -A INPUT -p tcp --dport 2424 -m state --state NEW -m recent --set
-      iptables -A INPUT -p tcp --dport 2424 -m state --state NEW -m recent --update --seconds 60 --hitcount 4 -j DROP
-      
-      # Rate limit HTTP/HTTPS (protects Traefik)
-      iptables -A INPUT -p tcp --dport 80 -m state --state NEW -m limit --limit 25/minute --limit-burst 100 -j ACCEPT
-      iptables -A INPUT -p tcp --dport 443 -m state --state NEW -m limit --limit 25/minute --limit-burst 100 -j ACCEPT
-      
-      # Drop invalid packets
-      iptables -A INPUT -m state --state INVALID -j DROP
-      
-      # Log dropped packets (rate limited)
-      iptables -A INPUT -m limit --limit 5/min -j LOG --log-prefix "IPTables-Dropped: " --log-level 4
-    '';
-  };
-
-  # Fail2ban - automatic IP banning
-  services.fail2ban = {
-    enable = true;
-    maxretry = 3;
-    bantime = "1h";
-    banaction = "iptables-multiport";
-    
-    jails = {
-      # SSH brute force protection (uses systemd journal backend)
-      sshd = {
-        enabled = true;
-        settings = {
-          filter = "sshd";
-          port = "2424";
-          maxretry = 3;
-          bantime = "1h";
-        };
-      };
-      
-      # Recidive - ban repeat offenders for 1 week
-      recidive = {
-        enabled = true;
-        settings = {
-          filter = "recidive";
-          logpath = "/var/log/fail2ban.log";
-          bantime = "1w";
-          findtime = "1d";
-          maxretry = 3;
-        };
-      };
-      
-      # HTTP authentication failures (Traefik)
-      http-auth = {
-        enabled = true;
-        settings = {
-          filter = "traefik-auth";
-          port = "80,443";
-          logpath = "/var/log/traefik/access.log";
-          maxretry = 5;
-          bantime = "1h";
-        };
-      };
-      
-      # HTTP scanning/attacks (Traefik)
-      http-botsearch = {
-        enabled = true;
-        settings = {
-          filter = "traefik-botsearch";
-          port = "80,443";
-          logpath = "/var/log/traefik/access.log";
-          maxretry = 2;
-          bantime = "2h";
-        };
-      };
-    };
-  };
-  
-  # Custom fail2ban filters for Traefik
-  environment.etc."fail2ban/filter.d/traefik-auth.conf".text = ''
-    [Definition]
-    failregex = ^<HOST> -.*"(GET|POST|HEAD|PUT|DELETE).*" (401|403) \d+.*$
-    ignoreregex =
-  '';
-  
-  environment.etc."fail2ban/filter.d/traefik-botsearch.conf".text = ''
-    [Definition]
-    failregex = ^<HOST> -.*"(GET|POST|HEAD|PUT|DELETE).*" 404 \d+.*$
-                ^<HOST> -.*"(GET|POST|HEAD|PUT|DELETE).*/(\.|wp-|php|admin|login|xmlrpc|\.env|\.git|\.aws|\.azure).*" \d+.*$
-    ignoreregex =
-  '';
-
-  # SSH hardening
-  services.openssh.settings = {
-    PermitRootLogin = "no";
-    MaxAuthTries = 3;
-    MaxSessions = 5;
-    LoginGraceTime = 30;
-    ClientAliveInterval = 300;
-    ClientAliveCountMax = 2;
-    PermitEmptyPasswords = "no";
-    ChallengeResponseAuthentication = "no";
-    UsePAM = true;
-    LogLevel = "VERBOSE";
-    X11Forwarding = false;
-    AllowTcpForwarding = "no";
-    AllowAgentForwarding = "no";
-    PermitTunnel = "no";
-  };
-
-  # Kernel network hardening
-  boot.kernel.sysctl = {
-    # IP Spoofing protection
-    "net.ipv4.conf.all.rp_filter" = 1;
-    "net.ipv4.conf.default.rp_filter" = 1;
-    
-    # Ignore ICMP broadcasts
-    "net.ipv4.icmp_echo_ignore_broadcasts" = 1;
-    
-    # Disable source routing
-    "net.ipv4.conf.all.accept_source_route" = 0;
-    "net.ipv4.conf.default.accept_source_route" = 0;
-    "net.ipv6.conf.all.accept_source_route" = 0;
-    "net.ipv6.conf.default.accept_source_route" = 0;
-    
-    # Disable redirects
-    "net.ipv4.conf.all.send_redirects" = 0;
-    "net.ipv4.conf.default.send_redirects" = 0;
-    
-    # SYN flood protection
-    "net.ipv4.tcp_syncookies" = 1;
-    "net.ipv4.tcp_max_syn_backlog" = 2048;
-    "net.ipv4.tcp_synack_retries" = 2;
-    "net.ipv4.tcp_syn_retries" = 5;
-    
-    # Log martian packets
-    "net.ipv4.conf.all.log_martians" = 1;
-    "net.ipv4.conf.default.log_martians" = 1;
-    
-    # Ignore redirects
-    "net.ipv4.conf.all.accept_redirects" = 0;
-    "net.ipv4.conf.default.accept_redirects" = 0;
-    "net.ipv4.conf.all.secure_redirects" = 0;
-    "net.ipv4.conf.default.secure_redirects" = 0;
-    "net.ipv6.conf.all.accept_redirects" = 0;
-    "net.ipv6.conf.default.accept_redirects" = 0;
-    
-    # Connection tuning
-    "net.core.somaxconn" = 4096;
-    "net.core.netdev_max_backlog" = 65536;
-    "net.ipv4.tcp_max_orphans" = 65536;
-    "net.ipv4.tcp_fin_timeout" = 15;
-    "net.ipv4.tcp_keepalive_time" = 300;
-    "net.ipv4.tcp_keepalive_probes" = 5;
-    "net.ipv4.tcp_keepalive_intvl" = 15;
-  };
-
-  # Audit logging
-  security.auditd.enable = true;
-  
-  # Fail2ban log directory
-  systemd.tmpfiles.rules = [
-    "d /var/log/fail2ban 0755 root root -"
-    "d /var/log/traefik 0755 root root -"
-  ];
-
   # Copy the NixOS configuration file and link it from the resulting system
   # (/run/current-system/configuration.nix). This is useful in case you
   # accidentally delete configuration.nix.

modules/nixos/services/ollama_init_custom_models.nix

@@ -14,25 +14,8 @@
         local base_model=$2
         if ! ${pkgs.docker}/bin/docker exec ollama ollama list | grep -q "$model_name"; then
           echo "$model_name not found, creating from $base_model..."
-          
-          # We use a custom TEMPLATE block to strip the 'currentDate' function 
-          # which is unsupported in Ollama 0.5.7 but present in Devstral's default manifest.
           ${pkgs.docker}/bin/docker exec ollama sh -c "cat <<EOF > /root/.ollama/$model_name.modelfile
 FROM $base_model
-TEMPLATE \"\"\"{{- if .System }}
-[SYSTEM_PROMPT]
-{{ .System }}
-[/SYSTEM_PROMPT]
-{{- end }}
-{{- range .Messages }}
-{{- if eq .Role \"user\" }}
-[INST]
-{{ .Content }}
-[/INST]
-{{- else if eq .Role \"assistant\" }}
-{{ .Content }}
-{{- end }}
-{{- end }}\"\"\"
 PARAMETER num_ctx 131072
 PARAMETER num_predict 4096
 PARAMETER num_keep 1024
@@ -43,7 +26,6 @@ PARAMETER stop \"[/INST]\"
 PARAMETER stop \"</s>\"
 EOF"
           ${pkgs.docker}/bin/docker exec ollama ollama create "$model_name" -f "/root/.ollama/$model_name.modelfile"
-          ${pkgs.docker}/bin/docker exec ollama rm "/root/.ollama/$model_name.modelfile"
         else
           echo "$model_name already exists, skipping."
         fi
@@ -54,10 +36,6 @@ EOF"
       
       # Create Devstral
       create_model_if_missing "devstral-small-2:24b-128k" "devstral-small-2:24b" 
-      
-      # create_model_if_missing "qwen2.5-coder:32b-128k" "qwen2.5-coder:32b"
-      
-      # create_model_if_missing "mistral-large-planner:123b" "mistral-large:123b-instruct-v2407-q4_K_S"
     '';
     serviceConfig = {
       Type = "oneshot";

users/ai-worker.nix

@@ -11,71 +11,4 @@
     ];
   };
   users.groups.ai-worker = {};
-  
-  # Restricted sudo for ai-worker - security checks only
-  security.sudo.extraRules = [
-    {
-      users = [ "ai-worker" ];
-      commands = [
-        # Firewall checks
-        {
-          command = "/run/wrappers/bin/sudo iptables -L -n -v";
-          options = [ "NOPASSWD" ];
-        }
-        {
-          command = "/run/wrappers/bin/sudo iptables -S";
-          options = [ "NOPASSWD" ];
-        }
-        # Fail2ban status
-        {
-          command = "/run/current-system/sw/bin/fail2ban-client status";
-          options = [ "NOPASSWD" ];
-        }
-        {
-          command = "/run/current-system/sw/bin/fail2ban-client status *";
-          options = [ "NOPASSWD" ];
-        }
-        {
-          command = "/run/current-system/sw/bin/fail2ban-client get * banned";
-          options = [ "NOPASSWD" ];
-        }
-        # Log inspection
-        {
-          command = "/run/current-system/sw/bin/journalctl -t kernel -n 100";
-          options = [ "NOPASSWD" ];
-        }
-        {
-          command = "/run/current-system/sw/bin/journalctl -u fail2ban -n 50";
-          options = [ "NOPASSWD" ];
-        }
-        {
-          command = "/run/current-system/sw/bin/journalctl -u firewall -n 50";
-          options = [ "NOPASSWD" ];
-        }
-        # SSH config verification
-        {
-          command = "/run/current-system/sw/bin/sshd -T";
-          options = [ "NOPASSWD" ];
-        }
-        # Docker service checks
-        {
-          command = "/run/current-system/sw/bin/docker ps";
-          options = [ "NOPASSWD" ];
-        }
-        {
-          command = "/run/current-system/sw/bin/docker inspect *";
-          options = [ "NOPASSWD" ];
-        }
-        # Network diagnostics
-        {
-          command = "/run/current-system/sw/bin/ss -tlnp";
-          options = [ "NOPASSWD" ];
-        }
-        {
-          command = "/run/current-system/sw/bin/cat /proc/net/tcp";
-          options = [ "NOPASSWD" ];
-        }
-      ];
-    }
-  ];
 }