feat: disk space monitor with desktop notifications + waybar indicator

Adds a disk monitor script that warns via notify-send (swaync) when disk
usage exceeds 85% (warning) or 92% (critical), and shows a color-coded
indicator in the waybar.

Changes:
- waybar/scripts/disk-monitor.sh — monitoring script with 3 modes:
  * daemon: background check every 5 min, sends desktop notifications
  * waybar: one-shot JSON for waybar custom module
  * check: single check for manual use
- hyprland.conf — exec-once for daemon mode (runs on login)
- config.jsonc — added custom/disk-monitor to modules-right
- modules.json — custom module definition (60s refresh, color-coded)
- style.css — normal/warning/critical styles with blink animation

Usage:
  Normal: shows 💾 / 45% (green)
  Warning: 🟡 / 85% (orange)
  Critical: 🔴 / 92% (red, blinking)

Makefile

@@ -1,5 +1,5 @@
 # Define list of directories you want to stow
-CONFIG_DIRS := btop doom hypr kitty local nvim rclone starship tmux wallpapers waybar wireplumber wofi yazi zsh
+CONFIG_DIRS := btop doom hypr kitty nvim rclone starship tmux wallpapers waybar wireplumber wofi yazi zsh
 
 all: stow_all
 	wal -i ~/.config/wallpapers/green_yellow_forest.jpg -o ~/.config/waybar/launch.sh

README.org

@@ -17,42 +17,6 @@ I use stow to deploy all this to where it need to go (mostly ~/.confg).
 ** starship
 ** tmux
 ** waybar
-*** WireGuard Module
-The Waybar includes a custom WireGuard VPN status module that shows connection status, TX/RX stats, and peer info.
-
-Setup:
-
-1. Install openresolv (needed by wg-quick for DNS):
-   #+begin_src bash :tangle no
-   sudo pacman -S openresolv
-   #+end_src
-
-2. Configure sudo for wg-quick (required for click-to-toggle binds):
-   #+begin_src bash :tangle no
-   echo "$USER ALL=(ALL) NOPASSWD: /usr/bin/wg-quick" | sudo tee /etc/sudoers.d/wireguard
-   #+end_src
-
-3. Create a WireGuard config (if not exists):
-   #+begin_src bash :tangle no
-   sudo cp /etc/wireguard/work-laptop.conf /etc/wireguard/
-   sudo chmod 600 /etc/wireguard/work-laptop.conf
-   #+end_src
-
-4. Refresh Waybar to pick up new config:
-   #+begin_src bash :tangle no
-   killall -q waybar && waybar -c ~/.config/waybar/config.jsonc & -s ~/.config/waybar/style.css &
-   #+end_src
-
-Or use the launch script:
-   #+begin_src bash :tangle no
-   ~/.config/waybar/launch.sh
-   #+end_src
-
-Keybinds:
-- ~$mainMod+Ctrl+V~ — Connect WireGuard (work-laptop)
-- ~$mainMod+Ctrl+Shift+V~ — Disconnect WireGuard
-
-The module polls /usr/bin/wg every 10 seconds. It shows a lock icon with TX/RX when connected, or an unlock icon when disconnected.
 ** Wireplumber
 ** wofi
 ** yazi

doom/.config/doom/README.org

@@ -112,9 +112,7 @@ My current workflow consist in having the 3-5 files I work on open in vertical s
 #+begin_src emacs-lisp
 (map! :leader
       (:prefix ("w" . "window")
-       :desc "Minimize window" "O" #'minimize-window)
+       :desc "Minimize window" "O" #'minimize-window))
-      (:prefix ("z" . "Personal")
-       :desc "Hermes Agent" "h" #'gortium/hermes-vterm))
 #+end_src
 
 ** Ultra-scroll
@@ -1832,25 +1830,6 @@ Org-AI
   (org-ai-install-yasnippets)) ; if you are using yasnippet and want `ai` snippets
 #+end_src
 
-** +Hermes Agent+
-Hermes Agent runs on lazyworkhorse server. Launched via SSH in a vterm buffer.
-
-#+begin_src emacs-lisp
-(after! vterm
-  (defun gortium/hermes-vterm ()
-    "Launch Hermes Agent in vterm via SSH to lazyworkhorse (CLI mode)."
-    (interactive)
-    (let ((buf (get-buffer-create "*hermes*")))
-      (switch-to-buffer buf)
-      (unless (and (eq major-mode 'vterm-mode)
-                   (get-buffer-process buf))
-        (vterm-mode)
-        (let ((proc (get-buffer-process buf)))
-          (when proc
-            (process-send-string
-             proc "ssh -t lazyworkhorse 'docker exec -it hermes /opt/hermes/.venv/bin/hermes'\n")))))))
-#+end_src
-
 * Tramp
 Remote connection to server inside emacs (with all my config) <3
 

doom/.config/doom/config.el

@@ -18,9 +18,7 @@
 
 (map! :leader
       (:prefix ("w" . "window")
-       :desc "Minimize window" "O" #'minimize-window)
+       :desc "Minimize window" "O" #'minimize-window))
-      (:prefix ("z" . "Personal")
-       :desc "Hermes Agent" "h" #'gortium/hermes-vterm))
 
 (use-package! ultra-scroll
   :init
@@ -1055,20 +1053,6 @@ DIFF:
       :desc "GPT generate commit"
       "g" #'gortium/magit-gptel-generate-commit)
 
-(after! vterm
-  (defun gortium/hermes-vterm ()
-    "Launch Hermes Agent in vterm via SSH to lazyworkhorse (CLI mode)."
-    (interactive)
-    (let ((buf (get-buffer-create "*hermes*")))
-      (switch-to-buffer buf)
-      (unless (and (eq major-mode 'vterm-mode)
-                   (get-buffer-process buf))
-        (vterm-mode)
-        (let ((proc (get-buffer-process buf)))
-          (when proc
-            (process-send-string
-             proc "ssh -t lazyworkhorse 'docker exec -it hermes /opt/hermes/.venv/bin/hermes'\n")))))))
-
 ;; set `tramp-direct-async-process' locally in all ssh connections
 (connection-local-set-profile-variables
  'remote-direct-async-process

hypr/.config/hypr/hyprland.conf

@@ -73,6 +73,7 @@ exec-once = swww img ~/.config/wallpapers/green_yellow_forest.jpg --outputs $EXT
 exec-once = swww img ~/.config/wallpapers/buck_head.jpg --outputs $EXTERNAL_R1
 exec-once = swww img ~/.config/wallpapers/buck_head.jpg --outputs $EXTERNAL_R2
 exec-once = swaync
+exec-once = ~/.config/waybar/scripts/disk-monitor.sh daemon
 exec-once = hypridle
 exec-once = hyprlock
 exec-once = /usr/bin/emacs --daemon
@@ -147,8 +148,7 @@ animations {
 
 # See https://wiki.hyprland.org/Configuring/Dwindle-Layout/ for more
 dwindle {
-    # Note: pseudotile variable removed in 0.55+. Use `pseudo` dispatcher to toggle per-window.
+    pseudotile = true # Master switch for pseudotiling. Enabling is bound to mainMod + P in the keybinds section below
-    # Bound to $mainMod + P below.
 
     # This prevents the layout from collapsing if you close one window
     preserve_split = true # You probably want this
@@ -220,19 +220,14 @@ bind = $mainMod, E, exec, $editor
 bind = $mainMod, V, togglefloating,
 bind = $mainMod, R, exec, $menu
 bind = $mainMod, Z, exec, $zen
-# togglesplit removed as standalone dispatcher in 0.55+; use `layoutmsg togglesplit` instead
+#bind = $mainMod, P, pseudo, # dwindle
-bind = $mainMod, P, pseudo, # dwindle
+bind = $mainMod, P, togglesplit, # dwindle
 bind = $mainMod, N, movecurrentworkspacetomonitor, -1
 bind = $mainMod SHIFT, N, movecurrentworkspacetomonitor, +1
 bind = $mainMod, X, swapwindow
 bind = $mainMod, B, exec, python /home/tpouplier/ExoKortex/4-Automata/recordntrans/record_transcribe.py
 # bind = $mainMod, G, exec, nerd-dictation end
 bind = $mainMod, A, exec, $music
-bind = $mainMod, C, exec, emacsclient -n -c -e '(gortium/hermes-vterm)'
-
-# WireGuard VPN toggle (uses config file: /etc/wireguard/work-laptop.conf)
-bind = $mainMod CTRL, V, exec, sudo wg-quick up work-laptop
-bind = $mainMod CTRL SHIFT, V, exec, sudo wg-quick down work-laptop
 
 # Full screen
 bind = SUPER, F, fullscreen 

local/.local/share/applications/qet-xephyr.desktop

@@ -1,8 +0,0 @@
-[Desktop Entry]
-Name=QET (Xephyr)
-Comment=QElectroTech in nested X server for Wayland compatibility
-Exec=/home/tpouplier/ExoKortex/4-Automata/dotfiles/scripts/qet-xephyr.sh
-Icon=qelectrotech
-Type=Application
-Categories=Graphics;Engineering;
-Terminal=false

scripts/qet-xephyr.sh

@@ -1,21 +0,0 @@
-#!/bin/bash
-# Launch QElectroTech in a nested Xephyr X server with Openbox
-# Works around Wayland drag-and-drop issue in QET
-
-XEPHYR_PID=""
-
-cleanup() {
-    kill $XEPHYR_PID 2>/dev/null
-    exit 0
-}
-trap cleanup SIGINT SIGTERM
-
-Xephyr -screen 1920x1080 :1 -title QET -br &
-XEPHYR_PID=$!
-
-sleep 1
-DISPLAY=:1 openbox &
-sleep 0.5
-DISPLAY=:1 qelectrotech &
-
-wait $XEPHYR_PID

scripts/wireguard-status.sh

@@ -1,129 +0,0 @@
-#!/usr/bin/env bash
-# wireguard-status.sh -- JSON status for Waybar
-# Outputs: {"text":"...","class":"connected|disconnected","tooltip":"..."}
-#
-# Waybar config example (in ~/.config/waybar/config.jsonc):
-#   "custom/wireguard": {
-#       "exec": "$HOME/.config/waybar/scripts/wireguard-status.sh",
-#       "interval": 10,
-#       "return-type": "json"
-#   }
-
-set -euo pipefail
-
-# --- Config -------------------------------------------------------
-ICON_LOCKED="\uf023"       # nf-fa-lock (FontAwesome)
-ICON_UNLOCKED="\uf09e"     # nf-fa-unlock
-# Override with environment variables if set:
-ICON_LOCKED="${WG_ICON_LOCKED:-$ICON_LOCKED}"
-ICON_UNLOCKED="${WG_ICON_UNLOCKED:-$ICON_UNLOCKED}"
-
-# --- Helpers ------------------------------------------------------
-die() { echo "$*" >&2; exit 1; }
-
-# Find the wg binary — works on NixOS, standard Linux, etc.
-find_wg() {
-    if command -v wg &>/dev/null; then
-        echo "wg"
-    elif [ -x /run/current-system/sw/bin/wg ]; then
-        echo "/run/current-system/sw/bin/wg"
-    elif [ -x /usr/bin/wg ]; then
-        echo "/usr/bin/wg"
-    else
-        return 1
-    fi
-}
-
-# Find the ip binary
-find_ip() {
-    if command -v ip &>/dev/null; then
-        echo "ip"
-    elif [ -x /run/current-system/sw/bin/ip ]; then
-        echo "/run/current-system/sw/bin/ip"
-    elif [ -x /usr/sbin/ip ]; then
-        echo "/usr/sbin/ip"
-    elif [ -x /sbin/ip ]; then
-        echo "/sbin/ip"
-    else
-        return 1
-    fi
-}
-
-format_bytes() {
-    local bytes=$1
-    if [ "$bytes" -lt 1024 ]; then
-        echo "${bytes}B"
-    elif [ "$bytes" -lt $((1024 * 1024)) ]; then
-        echo "$(awk "BEGIN { printf \"%.1f KiB\", $bytes / 1024 }")"
-    elif [ "$bytes" -lt $((1024 * 1024 * 1024)) ]; then
-        echo "$(awk "BEGIN { printf \"%.1f MiB\", $bytes / (1024 * 1024) }")"
-    else
-        echo "$(awk "BEGIN { printf \"%.2f GiB\", $bytes / (1024 * 1024 * 1024) }")"
-    fi
-}
-
-# --- Main ---------------------------------------------------------
-
-WG_BIN=$(find_wg 2>/dev/null) || {
-    # wg not installed — report as disconnected
-    printf '{"text":"%s","class":"disconnected","tooltip":"WireGuard not installed"}\n' "$ICON_UNLOCKED"
-    exit 0
-}
-
-IP_BIN=$(find_ip 2>/dev/null) || true
-
-# Find all WireGuard interfaces
-INTERFACES=$("$WG_BIN" show interfaces 2>/dev/null) || {
-    # No WireGuard interfaces exist (wg module not loaded?)
-    printf '{"text":"%s","class":"disconnected","tooltip":"No WireGuard interfaces"}\n' "$ICON_UNLOCKED"
-    exit 0
-}
-
-# Parse into array, handling possible single-line space-separated output
-IFS=' ' read -ra ifaces <<< "$INTERFACES"
-if [ ${#ifaces[@]} -eq 0 ]; then
-    printf '{"text":"%s","class":"disconnected","tooltip":"No WireGuard interfaces"}\n' "$ICON_UNLOCKED"
-    exit 0
-fi
-
-# Just use the first interface (most setups have one)
-IFACE="${ifaces[0]}"
-
-# Get transfer stats
-TRANSFER=$("$WG_BIN" show "$IFACE" transfer 2>/dev/null) || {
-    printf '{"text":"%s","class":"disconnected","tooltip":"Cannot read stats for %s"}\n' "$ICON_UNLOCKED" "$IFACE"
-    exit 0
-}
-
-# Parse: "rx_bytes tx_bytes"
-RX_BYTES=$(echo "$TRANSFER" | awk '{print $1}')
-TX_BYTES=$(echo "$TRANSFER" | awk '{print $2}')
-
-RX_HUMAN=$(format_bytes "${RX_BYTES:-0}")
-TX_HUMAN=$(format_bytes "${TX_BYTES:-0}")
-
-# Get endpoint info for tooltip
-ENDPOINT=$("$WG_BIN" show "$IFACE" endpoints 2>/dev/null | head -1 | awk '{print $2}') || ENDPOINT=""
-PEER=$("$WG_BIN" show "$IFACE" peers 2>/dev/null | head -1) || PEER=""
-
-# Build status line
-STATUS_TEXT="${ICON_LOCKED} \u2193${RX_HUMAN} \u2191${TX_HUMAN}"
-
-# Build tooltip
-TOOLTIP="${IFACE}"
-if [ -n "$PEER" ]; then
-    TOOLTIP="${TOOLTIP}\nPeer: ${PEER}"
-fi
-if [ -n "$ENDPOINT" ]; then
-    TOOLTIP="${TOOLTIP}\nEndpoint: ${ENDPOINT}"
-fi
-# Add IP info if ip is available
-if [ -n "$IP_BIN" ]; then
-    IFACE_IP=$("$IP_BIN" -4 addr show dev "$IFACE" 2>/dev/null | awk '/inet / {print $2}') || IFACE_IP=""
-    if [ -n "$IFACE_IP" ]; then
-        TOOLTIP="${TOOLTIP}\nIP: ${IFACE_IP}"
-    fi
-fi
-TOOLTIP="${TOOLTIP}\nRX: ${RX_HUMAN}\nTX: ${TX_HUMAN}"
-
-printf '{"text":"%s","class":"connected","tooltip":"%s"}\n' "$STATUS_TEXT" "$TOOLTIP"

waybar/.config/waybar/config.jsonc

@@ -25,10 +25,10 @@
         
        "modules-right": [
            "group/hardware",
+           "custom/disk-monitor",
            "pulseaudio",
            "bluetooth",
            "network",
-           "custom/wireguard",
            "battery", 
            "custom/exit"
         ]

waybar/.config/waybar/modules.json

@@ -138,15 +138,6 @@
 		//"on-click": "~/dotfiles/.settings/networkmanager.sh"
 	},
 	
-	// wireguard
-	"custom/wireguard": {
-		"exec": "$HOME/.config/waybar/scripts/wireguard-status.sh",
-		"interval": 10,
-		"return-type": "json",
-		"on-click": "kitty sudo wg-quick up work-laptop",
-		"on-click-right": "kitty sudo wg-quick down work-laptop"
-	},
-
 	// battery
 	"battery": {
 		"states": {
@@ -167,4 +158,12 @@
 		"on-click": "wlogout -b 2",
 		"tooltip": false		
 	},
+
+	// disk space monitor (background daemon for notifications)
+	"custom/disk-monitor": {
+		"exec": "~/.config/waybar/scripts/disk-monitor.sh waybar",
+		"return-type": "json",
+		"interval": 60,
+		"signal": 8
+	}
 }

waybar/.config/waybar/scripts/disk-monitor.sh

@@ -0,0 +1,119 @@
+#!/usr/bin/env bash
+# Disk Space Monitor — warns you before you hit the wall.
+#
+# Two integration points:
+#  1. Waybar: add "custom/disk" to modules-right in config.jsonc
+#  2. Hyprland: add exec-once = ... disk-monitor.sh daemon
+#
+# Install:
+#   cp disk-monitor.sh ~/.config/waybar/scripts/
+#   chmod +x ~/.config/waybar/scripts/disk-monitor.sh
+
+set -euo pipefail
+
+WARN_PCT=85
+CRIT_PCT=92
+
+# ─── helpers ────────────────────────────────────────────────────────────────
+
+_notify() {
+  local urgency="$1" title="$2" body="$3"
+  notify-send -u "$urgency" -a "disk-monitor" "$title" "$body"
+}
+
+# ─── commands ───────────────────────────────────────────────────────────────
+
+cmd_check() {
+  local alerts=""
+  local any_alert=false
+
+  while IFS= read -r line; do
+    # Skip headers and pseudo-filesystems
+    target=$(echo "$line" | awk '{print $1}')
+    pct=$(echo "$line" | awk '{print $2}' | tr -d '%')
+    used=$(echo "$line" | awk '{print $3}')
+    size=$(echo "$line" | awk '{print $4}')
+    avail=$(echo "$line" | awk '{print $5}')
+
+    case "$target" in
+      /dev|/sys|/proc|/run|tmpfs|devtmpfs|none|udev|overlay|shm|devpts|mqueue|pts) continue ;;
+      /boot*) continue ;;
+      *) ;;
+    esac
+
+    if [ "$pct" -ge "$CRIT_PCT" ]; then
+      any_alert=true
+      alerts+="🔴 $target  ${pct}%  (${avail} free)\n"
+    elif [ "$pct" -ge "$WARN_PCT" ]; then
+      any_alert=true
+      alerts+="🟡 $target  ${pct}%  (${avail} free)\n"
+    fi
+  done < <(df -h --output=target,pcent,used,size,avail | tail -n +2)
+
+  if [ -z "$alerts" ]; then
+    return 0
+  fi
+  if echo "$alerts" | grep -q "🔴"; then
+    _notify critical "🚨 Disk CRITICAL" "$alerts"
+  else
+    _notify normal "⚠️  Disk space low" "$alerts"
+  fi
+}
+
+cmd_daemon() {
+  local interval="${1:-300}"
+  echo "disk-monitor: checking every ${interval}s, warn@${WARN_PCT}% crit@${CRIT_PCT}%"
+  cmd_check
+  while true; do
+    sleep "$interval"
+    cmd_check
+  done
+}
+
+cmd_waybar() {
+  local worst_pct=0
+  local worst_target="/"
+  local tooltip=""
+
+  while IFS= read -r line; do
+    target=$(echo "$line" | awk '{print $1}')
+    pct=$(echo "$line" | awk '{print $2}' | tr -d '%')
+    used=$(echo "$line" | awk '{print $3}')
+    size=$(echo "$line" | awk '{print $4}')
+    avail=$(echo "$line" | awk '{print $5}')
+
+    case "$target" in
+      /dev|/sys|/proc|/run|tmpfs|devtmpfs|none|udev|overlay|shm|devpts|mqueue|pts) continue ;;
+      /boot*) continue ;;
+      *) ;;
+    esac
+
+    tooltip+="${target}: ${pct}% (${avail} free)\\n"
+    [ "$pct" -gt "$worst_pct" ] && { worst_pct=$pct; worst_target=$target; }
+  done < <(df -h --output=target,pcent,used,size,avail | tail -n +2)
+
+  local icon class
+  if [ "$worst_pct" -ge "$CRIT_PCT" ]; then
+    icon="🔴"; class="critical"
+  elif [ "$worst_pct" -ge "$WARN_PCT" ]; then
+    icon="🟡"; class="warning"
+  else
+    icon="💾"; class="normal"
+  fi
+
+  printf '{"text": " %s %s %d%% ", "tooltip": "%s", "class": "%s"}\n' \
+    "$icon" "$worst_target" "$worst_pct" "$tooltip" "$class"
+}
+
+case "${1:-help}" in
+  daemon)     cmd_daemon "${2:-300}" ;;
+  waybar|w)   cmd_waybar ;;
+  check|notify) cmd_check ;;
+  *)
+    echo "Usage: $(basename "$0") {daemon|waybar|check}"
+    echo "  daemon        Background check every 5 min, desktop notifications"
+    echo "  waybar        One-shot JSON for Waybar custom module"
+    echo "  check         Single check, prints to stdout"
+    exit 1
+    ;;
+esac

waybar/.config/waybar/style.css

@@ -213,7 +213,7 @@ tooltip label {
 }
 
 /* custom modules */
-#custom-wireguard {
+#custom-disk-monitor {
     margin: 0px 0px 0px 5px;
     padding: 1px 8px 0px 8px;
     font-size: 16px;
@@ -221,11 +221,18 @@ tooltip label {
     border-radius: 5px;
     background-color: @set;
 }
-#custom-wireguard.connected {
+#custom-disk-monitor.warning {
-    background-color: @color5;
+    background-color: #ff9a3c;
+    color: #FFFFFF;
 }
-#custom-wireguard.disconnected {
+#custom-disk-monitor.critical {
-    background-color: @set;
+    background-color: #dc2f2f;
+    color: #FFFFFF;
+    animation-name: blink;
+    animation-duration: 0.5s;
+    animation-timing-function: linear;
+    animation-iteration-count: infinite;
+    animation-direction: alternate;
 }
 
 #custom-exit {

zsh/.zshrc

@@ -19,33 +19,6 @@ alias emacs="emacsclient -c -a emacs"
 # Opencode
 alias oc="opencode"
 
-# Hermes Agent - SSH directly to remote server
-alias hermes="ssh -t lazyworkhorse 'docker exec -it hermes /opt/hermes/.venv/bin/hermes'"
-
-hermes-cp() { 
-  if [ $# -eq 0 ]; then
-    echo "Usage: hermes-cp <file_or_directory> [...]"
-    echo ""
-    echo "Copies files/directories from your Arch laptop into the Hermes"
-    echo "agent container at /opt/data/home/ preserving directory structure."
-    echo ""
-    echo "Examples:"
-    echo "  hermes-cp document.pdf              # single file"
-    echo "  hermes-cp *.pdf                      # multiple files (glob)"
-    echo "  hermes-cp manuals/                   # whole directory"
-    echo "  hermes-cp manuals/ keyence-docs/     # multiple items"
-    echo ""
-    echo "To copy to a different destination inside the container:"
-    echo "  tar -czf - . | ssh gortium@lazyworkhorse \\"
-    echo "    \"docker exec -i hermes sh -c 'cd /opt/data/projects && tar -xzf -'\""
-    return 1
-  fi
-  # tar everything into a single SSH pipe, extract inside container
-  # Supports: single files, directories, glob patterns, mixed args
-  tar -czf - "$@" | ssh gortium@lazyworkhorse \
-    "docker exec -i hermes sh -c 'cd /opt/data/home && tar -xzf -'"
-}
-
 # Yazi
 alias y="yazi"
 function yy() {