split hyprland config: common + per-host monitors

Reviewed-on: #14

README.org

@@ -17,42 +17,6 @@ I use stow to deploy all this to where it need to go (mostly ~/.confg).
 ** starship
 ** tmux
 ** waybar
-*** WireGuard Module
-The Waybar includes a custom WireGuard VPN status module that shows connection status, TX/RX stats, and peer info.
-
-Setup:
-
-1. Install openresolv (needed by wg-quick for DNS):
-   #+begin_src bash :tangle no
-   sudo pacman -S openresolv
-   #+end_src
-
-2. Configure sudo for wg-quick (required for click-to-toggle binds):
-   #+begin_src bash :tangle no
-   echo "$USER ALL=(ALL) NOPASSWD: /usr/bin/wg-quick" | sudo tee /etc/sudoers.d/wireguard
-   #+end_src
-
-3. Create a WireGuard config (if not exists):
-   #+begin_src bash :tangle no
-   sudo cp /etc/wireguard/work-laptop.conf /etc/wireguard/
-   sudo chmod 600 /etc/wireguard/work-laptop.conf
-   #+end_src
-
-4. Refresh Waybar to pick up new config:
-   #+begin_src bash :tangle no
-   killall -q waybar && waybar -c ~/.config/waybar/config.jsonc & -s ~/.config/waybar/style.css &
-   #+end_src
-
-Or use the launch script:
-   #+begin_src bash :tangle no
-   ~/.config/waybar/launch.sh
-   #+end_src
-
-Keybinds:
-- ~$mainMod+Ctrl+V~ — Connect WireGuard (work-laptop)
-- ~$mainMod+Ctrl+Shift+V~ — Disconnect WireGuard
-
-The module polls /usr/bin/wg every 10 seconds. It shows a lock icon with TX/RX when connected, or an unlock icon when disconnected.
 ** Wireplumber
 ** wofi
 ** yazi

doom/.config/doom/README.org

@@ -496,6 +496,19 @@ change ~org-directory~. It must be set before org loads!
 
            ((org-agenda-tag-filter-preset '("+BA_ON_SITE")))
            )
+          ("wA" "Projet Airbus Vision"
+           ((agenda ""
+                    ((org-agenda-span 150)
+                     (org-agenda-start-day "2026-05-01")
+                     (org-agenda-overriding-header "📅 Projet Airbus Vision")
+                     (org-agenda-prefix-format " %12t") ;; reserve time space
+                     (org-agenda-todo-keyword-format "    %-5s") ;; fixed-width TODO
+                     (org-agenda-tags-column -100) ;; right-align tags
+                     (org-agenda-time-grid nil)
+                     )))
+
+           ((org-agenda-tag-filter-preset '("+airbus")))
+           )
           )
         )
   )

doom/.config/doom/config.el

@@ -367,6 +367,19 @@
 
            ((org-agenda-tag-filter-preset '("+BA_ON_SITE")))
            )
+          ("wA" "Projet Airbus Vision"
+           ((agenda ""
+                    ((org-agenda-span 150)
+                     (org-agenda-start-day "2026-05-01")
+                     (org-agenda-overriding-header "📅 Projet Airbus Vision")
+                     (org-agenda-prefix-format " %12t") ;; reserve time space
+                     (org-agenda-todo-keyword-format "    %-5s") ;; fixed-width TODO
+                     (org-agenda-tags-column -100) ;; right-align tags
+                     (org-agenda-time-grid nil)
+                     )))
+
+           ((org-agenda-tag-filter-preset '("+airbus")))
+           )
           )
         )
   )

hypr/.config/hypr/host/laptop.conf

@@ -0,0 +1,48 @@
+# Laptop (Ingenuity/Valkyrie) — NVIDIA + external monitors
+
+################
+### MONITORS ###
+################
+
+$LAPTOP=eDP-1
+$EXTERNAL_L1=DP-4
+$EXTERNAL_R1=DP-5
+$EXTERNAL_L2=DP-6
+$EXTERNAL_R2=DP-7
+
+monitor=$LAPTOP, 1920x1080, 0x0, 1
+monitor=DP-3, 1920x1080, 1920x0, 1
+
+monitor=$EXTERNAL_L1, 1920x1080, 0x-1080, 1, transform, 0
+monitor=$EXTERNAL_L2, 1920x1080,0x-1080,1,transform,0
+monitor=$EXTERNAL_R1, 1920x1080, 1920x-1480, 1, transform, 1
+monitor=$EXTERNAL_R2, 1920x1080,1920x-1480,1,transform,1
+
+#############################
+### ENVIRONMENT VARIABLES ###
+#############################
+
+env = LIBVA_DRIVER_NAME,nvidia
+env = __GLX_VENDOR_LIBRARY_NAME,nvidia
+env = WLR_NO_HARDWARE_CURSOR,1
+env = GBM_BACKEND,nvidia-drm
+env = WLR_RENDERER_ALLOW_SOFTWARE,1
+
+####################
+### WORKSPACES ###
+####################
+
+workspace = 1, name:short-1, monitor:DP-4
+workspace = 2, name:short-2, monitor:DP-4
+workspace = 3, name:long-1, monitor:DP-5
+workspace = 4, name:long-2, monitor:DP-5
+workspace = 5, name:smoll, monitor:eDP-1
+workspace = special:tools, layout:dwindle, gapsin:0
+
+### WALLPAPER ###
+
+exec-once = swww img ~/.config/wallpapers/green_yellow_forest.jpg --outputs $LAPTOP
+exec-once = swww img ~/.config/wallpapers/green_yellow_forest.jpg --outputs $EXTERNAL_L1
+exec-once = swww img ~/.config/wallpapers/green_yellow_forest.jpg --outputs $EXTERNAL_L2
+exec-once = swww img ~/.config/wallpapers/buck_head.jpg --outputs $EXTERNAL_R1
+exec-once = swww img ~/.config/wallpapers/buck_head.jpg --outputs $EXTERNAL_R2

hypr/.config/hypr/host/uconsole.conf

@@ -0,0 +1,27 @@
+# uConsole CM5 — DSI display
+
+################
+### MONITORS ###
+################
+
+monitor=DSI-2, 720x1280, 0x0, 1
+
+#############################
+### ENVIRONMENT VARIABLES ###
+#############################
+
+env = WLR_NO_HARDWARE_CURSOR,1
+
+####################
+### WORKSPACES ###
+####################
+
+workspace = 1, name:short-1, monitor:DSI-2
+workspace = 2, name:short-2, monitor:DSI-2
+workspace = 3, name:long-1, monitor:DSI-2
+
+####################
+### AUTOSTART ###
+####################
+
+exec-once = swww img ~/.config/wallpapers/green_yellow_forest.jpg --outputs DSI-2

hypr/.config/hypr/hyprland.conf

@@ -1,52 +1,14 @@
-# This is an example Hyprland config file.
+# Common Hyprland configuration — shared across all hosts
-# Refer to the wiki for more information.
+# Host-specific settings (monitors, env, workspaces) in host/monitors.conf
-# https://wiki.hyprland.org/Configuring/Configuring-Hyprland/
 
-# Please note not all available settings / options are set here.
+source = mocha.conf
-# For a full list, see the wiki
-
-# You can split this configuration into multiple files
-# Create your files separately and then link them to this file like this:
-# source = ~/.config/hypr/myColors.conf
 source = ~/.cache/wal/colors-hyprland.conf
-
+source = host/monitors.conf
-################
-### MONITORS ###
-################
-
-$LAPTOP=eDP-1
-$EXTERNAL_L1=DP-4
-$EXTERNAL_R1=DP-5
-$EXTERNAL_L2=DP-6
-$EXTERNAL_R2=DP-7
-
-# See https://wiki.hyprland.org/Configuring/Monitors/
-# Useful command: 
-# hyprctl monitors all
-## Valkyrie setup
-# monitor=eDP-1,highres,auto,2 #3200x1800,0x0,2
-# monitor=HDMI-A-2,2560x1600,auto,1 #1600x0,1  #x-370,1,transform,1
-## Ingenuity setup
-monitor=$LAPTOP, 1920x1080, 0x0, 1
-monitor=DP-3, 1920x1080, 1920x0, 1        # HDMI screen
-# Horizontal setup
-#monitor=DP-4,1920x1080,-960x-1080,1    # Left screen
-#monitor=DP-6,1920x1080,-960x-1080,1    # Left screen
-#monitor=DP-5,1920x1080,960x-1080,1     # Right screen
-#monitor=DP-7,1920x1080,960x-1080,1     # Right screen
-# Vertical setup
-monitor=$EXTERNAL_L1, 1920x1080, 0x-1080, 1, transform, 0        # Left screen
-monitor=$EXTERNAL_L2, 1920x1080,0x-1080,1,transform,0        # Left screen
-monitor=$EXTERNAL_R1, 1920x1080, 1920x-1480, 1, transform, 1     # Right screen
-monitor=$EXTERNAL_R2, 1920x1080,1920x-1480,1,transform,1     # Right screen
 
 ###################
 ### MY PROGRAMS ###
 ###################
 
-# See https://wiki.hyprland.org/Configuring/Keywords/
-
-# Set programs that you use
 $terminal = kitty
 $editor = emacsclient -c -a emacs
 $menu = wofi --show drun
@@ -58,20 +20,10 @@ $monitoring = kitty btop
 ### AUTOSTART ###
 #################
 
-# Autostart necessary processes (like notifications daemons, status bars, etc.)
-# Or execute your favorite apps at launch like this:
-
-# exec-once = $terminal
-# exec-once = nm-applet &
 exec = hyprshade auto
 exec-once = udiskie
 exec-once = waybar
 exec-once = swww-daemon
-exec-once = swww img ~/.config/wallpapers/green_yellow_forest.jpg --outputs $LAPTOP
-exec-once = swww img ~/.config/wallpapers/green_yellow_forest.jpg --outputs $EXTERNAL_L1
-exec-once = swww img ~/.config/wallpapers/green_yellow_forest.jpg --outputs $EXTERNAL_L2
-exec-once = swww img ~/.config/wallpapers/buck_head.jpg --outputs $EXTERNAL_R1
-exec-once = swww img ~/.config/wallpapers/buck_head.jpg --outputs $EXTERNAL_R2
 exec-once = swaync
 exec-once = hypridle
 exec-once = hyprlock
@@ -82,60 +34,34 @@ exec-once = dbus-update-activation-environment --systemd HYPRLAND_INSTANCE_SIGNA
 ### ENVIRONMENT VARIABLES ###
 #############################
 
-# See https://wiki.hyprland.org/Configuring/Environment-variables/
-
 env = XCURSOR_SIZE,24
 env = HYPRCURSOR_SIZE,24
-env = LIBVA_DRIVER_NAME,nvidia
-env = __GLX_VENDOR_LIBRARY_NAME,nvidia
-env = WLR_NO_HARDWARE_CURSOR,1
 env = XDG_SESSION_TYPE,wayland
-env = GBM_BACKEND,nvidia-drm
-env = WLR_RENDERER_ALLOW_SOFTWARE,1
 
 #####################
 ### LOOK AND FEEL ###
 #####################
 
-# Refer to https://wiki.hyprland.org/Configuring/Variables/
-
-# https://wiki.hyprland.org/Configuring/Variables/#general
 general {
     gaps_in = 7.5
     gaps_out = 15
-
     border_size = 2
-
-    # https://wiki.hyprland.org/Configuring/Variables/#variable-types for info about colors
     col.active_border = $color1 $color1 $color2 45deg
     col.inactive_border = $background
-
-    # Set to true enable resizing windows by clicking and dragging on borders and gaps
     resize_on_border = false
-
-    # Please see https://wiki.hyprland.org/Configuring/Tearing/ before you turn this on
     allow_tearing = false
-
     layout = dwindle
 }
 
-# https://wiki.hyprland.org/Configuring/Variables/#decoration
 decoration {
     rounding = 4
-
-    # Change transparency of focused and unfocused windows
     active_opacity = 0.9
     inactive_opacity = 0.75
 }
 
-# https://wiki.hyprland.org/Configuring/Variables/#animations
 animations {
     enabled = true
-
-    # Default animations, see https://wiki.hyprland.org/Configuring/Animations/ for more
-
     bezier = myBezier, 0.05, 0.9, 0.1, 1.05
-
     animation = windows, 1, 1.6, myBezier
     animation = windowsOut, 1, 1.6, default, popin 80%
     animation = border, 1, 1.6, default
@@ -145,59 +71,37 @@ animations {
     animation = specialWorkspace, 1, 1.6, myBezier, slidefadevert -10%
 }
 
-# See https://wiki.hyprland.org/Configuring/Dwindle-Layout/ for more
 dwindle {
-    # Note: pseudotile variable removed in 0.55+. Use `pseudo` dispatcher to toggle per-window.
+    preserve_split = true
-    # Bound to $mainMod + P below.
-
-    # This prevents the layout from collapsing if you close one window
-    preserve_split = true # You probably want this
-
-    # 0 -> follow mouse, 1 -> always left/top, 2 -> always right/bottom
     force_split = 2
 }
 
-# See https://wiki.hyprland.org/Configuring/Master-Layout/ for more
 master {
     new_status = master
 }
 
-# https://wiki.hyprland.org/Configuring/Variables/#misc
 misc {
-    force_default_wallpaper = 0 # Set to 0 or 1 to disable the anime mascot wallpapers
+    force_default_wallpaper = 0
-    disable_hyprland_logo = true # If true disables the random hyprland logo / anime girl background. :(
+    disable_hyprland_logo = true
 }
 
-
 #############
 ### INPUT ###
 #############
 
-# https://wiki.hyprland.org/Configuring/Variables/#input
 input {
-    kb_layout = us,ca #,halmak
+    kb_layout = us,ca
     kb_options = grp:win_space_toggle, ctrl:nocaps
-    # kb_variant =
-    # kb_model =
-    # kb_rules = 
-
     follow_mouse = 1
-
+    sensitivity = 0.5
-    sensitivity = 0.5 # -1.0 - 1.0, 0 means no modification.
-
     touchpad {
         natural_scroll = true
         disable_while_typing = true
     }
 }
 
-# https://wiki.hyprland.org/Configuring/Variables/#gestures
+gestures {}
-gestures {
-    # workspace_swipe = false
-}
 
-# Example per-device config
-# See https://wiki.hyprland.org/Configuring/Keywords/#per-device-input-configs for more
 device {
     name = epic-mouse-v1
     sensitivity = -0.5
@@ -207,10 +111,8 @@ device {
 ### KEYBINDINGS ###
 ###################
 
-# See https://wiki.hyprland.org/Configuring/Keywords/
+$mainMod = SUPER
-$mainMod = SUPER # Sets "Windows" key as main modifier
 
-# Example binds, see https://wiki.hyprland.org/Configuring/Binds/ for more
 bind = $mainMod, T, exec, $terminal
 bind = $mainMod, D, killactive,
 bind = $mainMod SHIFT, Q, exit,
@@ -220,60 +122,43 @@ bind = $mainMod, E, exec, $editor
 bind = $mainMod, V, togglefloating,
 bind = $mainMod, R, exec, $menu
 bind = $mainMod, Z, exec, $zen
-# togglesplit removed as standalone dispatcher in 0.55+; use `layoutmsg togglesplit` instead
+bind = $mainMod, P, pseudo,
-bind = $mainMod, P, pseudo, # dwindle
 bind = $mainMod, N, movecurrentworkspacetomonitor, -1
 bind = $mainMod SHIFT, N, movecurrentworkspacetomonitor, +1
 bind = $mainMod, X, swapwindow
 bind = $mainMod, B, exec, python /home/tpouplier/ExoKortex/4-Automata/recordntrans/record_transcribe.py
-# bind = $mainMod, G, exec, nerd-dictation end
 bind = $mainMod, A, exec, $music
 bind = $mainMod, C, exec, emacsclient -n -c -e '(gortium/hermes-vterm)'
 
-# WireGuard VPN toggle (uses config file: /etc/wireguard/work-laptop.conf)
-bind = $mainMod CTRL, V, exec, sudo wg-quick up work-laptop
-bind = $mainMod CTRL SHIFT, V, exec, sudo wg-quick down work-laptop
-
-# Full screen
 bind = SUPER, F, fullscreen
-
-# Screenshot
 bind = , PRINT, exec, hyprshot -m output
 bind = $mainMod, PRINT, exec, hyprshot -m window
 bind = shift, PRINT, exec, hyprshot -m region
-
-# hyprlock
 bind = $mainMod, o, exec, hyprlock
 
-# Move focus with mainMod + arrow keys
 bind = $mainMod, h, movefocus, l
 bind = $mainMod, j, movefocus, d
 bind = $mainMod, k, movefocus, u
 bind = $mainMod, l, movefocus, r
 
-# Forward and reverse cycle (to focus floating)
 bind = $mainMod, Tab, cyclenext
 bind = $mainMod SHIFT, Tab, cyclenext, prev
 
-# Resize windows
 bind = $mainMod CTRL, l, resizeactive, 20 0
 bind = $mainMod CTRL, h, resizeactive, -20 0
 bind = $mainMod CTRL, k, resizeactive, 0 -20
 bind = $mainMod CTRL, j, resizeactive, 0 20
 
-# Swap window position
 bind = $mainMod SHIFT, h, swapwindow, l
 bind = $mainMod SHIFT, j, swapwindow, d
 bind = $mainMod SHIFT, k, swapwindow, u
 bind = $mainMod SHIFT, l, swapwindow, r
 
-# Move floating window
 bind = $mainMod SHIFT, l, moveactive, 100 0
 bind = $mainMod SHIFT, h, moveactive, -100 0
 bind = $mainMod SHIFT, k, moveactive, 0 -100
 bind = $mainMod SHIFT, j, moveactive, 0 100
 
-# Switch workspaces with mainMod + [0-9]
 bind = $mainMod, 1, workspace, 1
 bind = $mainMod, 2, workspace, 2
 bind = $mainMod, 3, workspace, 3
@@ -285,7 +170,6 @@ bind = $mainMod, 8, workspace, 8
 bind = $mainMod, 9, workspace, 9
 bind = $mainMod, 0, workspace, 10
 
-# Move active window to a workspace with mainMod + SHIFT + [0-9]
 bind = $mainMod SHIFT, 1, movetoworkspace, 1
 bind = $mainMod SHIFT, 2, movetoworkspace, 2
 bind = $mainMod SHIFT, 3, movetoworkspace, 3
@@ -297,19 +181,15 @@ bind = $mainMod SHIFT, 8, movetoworkspace, 8
 bind = $mainMod SHIFT, 9, movetoworkspace, 9
 bind = $mainMod SHIFT, 0, movetoworkspace, 10
 
-# Example special workspace (scratchpad)
 bind = $mainMod, S, togglespecialworkspace, tools
 bind = $mainMod SHIFT, S, movetoworkspace, special:tools
 
-# Scroll through existing workspaces with mainMod + scroll
 bind = $mainMod, mouse_down, workspace, e+1
 bind = $mainMod, mouse_up, workspace, e-1
 
-# Move/resize windows with mainMod + LMB/RMB and dragging
 bindm = $mainMod, mouse:272, movewindow
 bindm = $mainMod, mouse:273, resizewindow
 
-# Laptop multimedia keys for volume and LCD brightness
 bindel = ,XF86AudioRaiseVolume, exec, wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%+
 bindel = ,XF86AudioLowerVolume, exec, wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%-
 bindel = ,XF86AudioMute, exec, wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle
@@ -317,13 +197,11 @@ bindel = ,XF86AudioMicMute, exec, wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle
 bindel = ,XF86MonBrightnessUp, exec, brightnessctl s 10%+
 bindel = ,XF86MonBrightnessDown, exec, brightnessctl s 10%-
 
-# Requires playerctl
 bindl = , XF86AudioNext, exec, playerctl next
 bindl = , XF86AudioPause, exec, playerctl play-pause
 bindl = , XF86AudioPlay, exec, playerctl play-pause
 bindl = , XF86AudioPrev, exec, playerctl previous
 
-# Emacs-everywhere
 bind = $mainMod, W, exec, emacsclient --eval '(thanos/type)'
 windowrule {
     name = float-emacs
@@ -331,45 +209,16 @@ windowrule {
     float = true
 }
 
-# Play/Pause
-# bind = $mainMod, P, exec, playerctl play-pause
-
-# Next Track
-# bind = $mainmod SHIFT, L, exec, playerctl next
-
-# Previous Track
-# bind = $mainmod SHIFT, H, exec, playerctl previous
-
-# Volume Up (player volume)
-# bind = $mainmod , U, exec, playerctl volume 0.05+
-
-# Volume Down (player volume)
-# bind = $mainmod, D, exec, playerctl volume 0.05-
-
-# Stop Playback
-# bind = $mainmod, S, exec, playerctl stop
-
 ##############################
 ### WINDOWS AND WORKSPACES ###
 ##############################
 
-# See https://wiki.hyprland.org/Configuring/Window-Rules/ for more
-# See https://wiki.hyprland.org/Configuring/Workspace-Rules/ for workspace rules
-
-# Example windowrule v1
-# windowrule = float, ^(kitty)$
-
-# Example windowrule v2
-# windowrule = float,class:^(kitty)$,title:^(kitty)$
-
-# Ignore maximize requests from apps. You'll probably like this.
 windowrule {
     name = suppress-maximize-events
     match:class = .*
     suppress_event = maximize
 }
 
-# Fix some dragging issues with XWayland
 windowrule {
     name = nofocus-xwayland-float
     match:class = ^$
@@ -381,15 +230,7 @@ windowrule {
     no_focus = true
 }
 
-workspace = 1, name:short-1, monitor:DP-4  # Left screen
+# Dashboard windows for special workspace
-workspace = 2, name:short-2, monitor:DP-4  # Left screen
-workspace = 3, name:long-1, monitor:DP-5  # Right screen
-workspace = 4, name:long-2, monitor:DP-5  # Right screen
-workspace = 5, name:smoll, monitor:eDP-1  # Laptop screen
-#workspace = 4, name:windows, monitor:DP-4, on-created-empty:VBoxManage startvm "Windows 11"
-workspace = special:tools, layout:dwindle, gapsin:0
-
-# Top Left: btop
 windowrule {
     name = dashboard-btop
     match:class = ^(btop)$
@@ -397,7 +238,6 @@ windowrule {
     workspace = special:tools
 }
 
-# Top Right: ncspot
 windowrule {
     name = dashboard-ncspot
     match:class = ^(ncspot)$
@@ -405,7 +245,6 @@ windowrule {
     workspace = special:tools
 }
 
-# Bottom Left: ncpamixer
 windowrule {
     name = dashboard-ncpamixer
     match:class = ^(ncpamixer)$
@@ -413,7 +252,6 @@ windowrule {
     workspace = special:tools
 }
 
-# Bottom Right: bluetuith
 windowrule {
     name = dashboard-bluetuith
     match:class = ^(bluetuith)$
@@ -421,7 +259,6 @@ windowrule {
     workspace = special:tools
 }
 
-# Bind to launch the suite (Run this once)
 bind = $mainMod, grave, exec, kitty --class btop btop
 bind = $mainMod, grave, exec, kitty --class ncspot ncspot
 bind = $mainMod, grave, exec, kitty --class ncpamixer ncpamixer

hypr/.config/hypr/mocha.conf

@@ -76,3 +76,11 @@ $mantleAlpha = 181825
 
 $crust = rgb(11111b)
 $crustAlpha = 11111b
+
+# Fallback colors for when pywal hasn't generated colors-hyprland.conf
+# (sourced by hyprland.conf — $color1/$color2 for active border gradients,
+#  $background for inactive border and general bg usage)
+$color1 = rgb(cba6f7)
+$color2 = rgb(f5c2e7)
+$color3 = rgb(89b4fa)
+$background = rgb(1e1e2e)

scripts/scrot-ocr.sh

@@ -0,0 +1,16 @@
+#!/bin/bash
+scrot-ocr: Select screen region → OCR → clipboard
+Deps: grim, slurp, tesseract, wl-clipboard, libnotify
+set -euo pipefail
+
+LANG="${1:-eng}"
+IMG="/tmp/scrot-ocr-$(date +%s).png"
+
+grim -g "$(slurp -d)" "$IMG"
+TEXT=$(tesseract "$IMG" stdout -l "$LANG" 2>/dev/null | sed '/^[[:space:]]*$/d')
+
+echo -n "$TEXT" | wl-copy --paste-once
+echo "$TEXT"
+
+notify-send "scrot-ocr" "$(echo "$TEXT" | wc -l) lines copied to clipboard" -t 3000
+rm -f "$IMG"

scripts/wireguard-status.sh

@@ -1,129 +0,0 @@
-#!/usr/bin/env bash
-# wireguard-status.sh -- JSON status for Waybar
-# Outputs: {"text":"...","class":"connected|disconnected","tooltip":"..."}
-#
-# Waybar config example (in ~/.config/waybar/config.jsonc):
-#   "custom/wireguard": {
-#       "exec": "$HOME/.config/waybar/scripts/wireguard-status.sh",
-#       "interval": 10,
-#       "return-type": "json"
-#   }
-
-set -euo pipefail
-
-# --- Config -------------------------------------------------------
-ICON_LOCKED="\uf023"       # nf-fa-lock (FontAwesome)
-ICON_UNLOCKED="\uf09e"     # nf-fa-unlock
-# Override with environment variables if set:
-ICON_LOCKED="${WG_ICON_LOCKED:-$ICON_LOCKED}"
-ICON_UNLOCKED="${WG_ICON_UNLOCKED:-$ICON_UNLOCKED}"
-
-# --- Helpers ------------------------------------------------------
-die() { echo "$*" >&2; exit 1; }
-
-# Find the wg binary — works on NixOS, standard Linux, etc.
-find_wg() {
-    if command -v wg &>/dev/null; then
-        echo "wg"
-    elif [ -x /run/current-system/sw/bin/wg ]; then
-        echo "/run/current-system/sw/bin/wg"
-    elif [ -x /usr/bin/wg ]; then
-        echo "/usr/bin/wg"
-    else
-        return 1
-    fi
-}
-
-# Find the ip binary
-find_ip() {
-    if command -v ip &>/dev/null; then
-        echo "ip"
-    elif [ -x /run/current-system/sw/bin/ip ]; then
-        echo "/run/current-system/sw/bin/ip"
-    elif [ -x /usr/sbin/ip ]; then
-        echo "/usr/sbin/ip"
-    elif [ -x /sbin/ip ]; then
-        echo "/sbin/ip"
-    else
-        return 1
-    fi
-}
-
-format_bytes() {
-    local bytes=$1
-    if [ "$bytes" -lt 1024 ]; then
-        echo "${bytes}B"
-    elif [ "$bytes" -lt $((1024 * 1024)) ]; then
-        echo "$(awk "BEGIN { printf \"%.1f KiB\", $bytes / 1024 }")"
-    elif [ "$bytes" -lt $((1024 * 1024 * 1024)) ]; then
-        echo "$(awk "BEGIN { printf \"%.1f MiB\", $bytes / (1024 * 1024) }")"
-    else
-        echo "$(awk "BEGIN { printf \"%.2f GiB\", $bytes / (1024 * 1024 * 1024) }")"
-    fi
-}
-
-# --- Main ---------------------------------------------------------
-
-WG_BIN=$(find_wg 2>/dev/null) || {
-    # wg not installed — report as disconnected
-    printf '{"text":"%s","class":"disconnected","tooltip":"WireGuard not installed"}\n' "$ICON_UNLOCKED"
-    exit 0
-}
-
-IP_BIN=$(find_ip 2>/dev/null) || true
-
-# Find all WireGuard interfaces
-INTERFACES=$("$WG_BIN" show interfaces 2>/dev/null) || {
-    # No WireGuard interfaces exist (wg module not loaded?)
-    printf '{"text":"%s","class":"disconnected","tooltip":"No WireGuard interfaces"}\n' "$ICON_UNLOCKED"
-    exit 0
-}
-
-# Parse into array, handling possible single-line space-separated output
-IFS=' ' read -ra ifaces <<< "$INTERFACES"
-if [ ${#ifaces[@]} -eq 0 ]; then
-    printf '{"text":"%s","class":"disconnected","tooltip":"No WireGuard interfaces"}\n' "$ICON_UNLOCKED"
-    exit 0
-fi
-
-# Just use the first interface (most setups have one)
-IFACE="${ifaces[0]}"
-
-# Get transfer stats
-TRANSFER=$("$WG_BIN" show "$IFACE" transfer 2>/dev/null) || {
-    printf '{"text":"%s","class":"disconnected","tooltip":"Cannot read stats for %s"}\n' "$ICON_UNLOCKED" "$IFACE"
-    exit 0
-}
-
-# Parse: "rx_bytes tx_bytes"
-RX_BYTES=$(echo "$TRANSFER" | awk '{print $1}')
-TX_BYTES=$(echo "$TRANSFER" | awk '{print $2}')
-
-RX_HUMAN=$(format_bytes "${RX_BYTES:-0}")
-TX_HUMAN=$(format_bytes "${TX_BYTES:-0}")
-
-# Get endpoint info for tooltip
-ENDPOINT=$("$WG_BIN" show "$IFACE" endpoints 2>/dev/null | head -1 | awk '{print $2}') || ENDPOINT=""
-PEER=$("$WG_BIN" show "$IFACE" peers 2>/dev/null | head -1) || PEER=""
-
-# Build status line
-STATUS_TEXT="${ICON_LOCKED} \u2193${RX_HUMAN} \u2191${TX_HUMAN}"
-
-# Build tooltip
-TOOLTIP="${IFACE}"
-if [ -n "$PEER" ]; then
-    TOOLTIP="${TOOLTIP}\nPeer: ${PEER}"
-fi
-if [ -n "$ENDPOINT" ]; then
-    TOOLTIP="${TOOLTIP}\nEndpoint: ${ENDPOINT}"
-fi
-# Add IP info if ip is available
-if [ -n "$IP_BIN" ]; then
-    IFACE_IP=$("$IP_BIN" -4 addr show dev "$IFACE" 2>/dev/null | awk '/inet / {print $2}') || IFACE_IP=""
-    if [ -n "$IFACE_IP" ]; then
-        TOOLTIP="${TOOLTIP}\nIP: ${IFACE_IP}"
-    fi
-fi
-TOOLTIP="${TOOLTIP}\nRX: ${RX_HUMAN}\nTX: ${TX_HUMAN}"
-
-printf '{"text":"%s","class":"connected","tooltip":"%s"}\n' "$STATUS_TEXT" "$TOOLTIP"

waybar/.config/waybar/config.jsonc

@@ -28,7 +28,6 @@
            "pulseaudio",
            "bluetooth",
            "network",
-           "custom/wireguard",
            "battery", 
            "custom/exit"
         ]

waybar/.config/waybar/modules.json

@@ -138,15 +138,6 @@
 		//"on-click": "~/dotfiles/.settings/networkmanager.sh"
 	},
 	
-	// wireguard
-	"custom/wireguard": {
-		"exec": "$HOME/.config/waybar/scripts/wireguard-status.sh",
-		"interval": 10,
-		"return-type": "json",
-		"on-click": "kitty sudo wg-quick up work-laptop",
-		"on-click-right": "kitty sudo wg-quick down work-laptop"
-	},
-
 	// battery
 	"battery": {
 		"states": {

waybar/.config/waybar/style.css

@@ -213,21 +213,6 @@ tooltip label {
 }
 
 /* custom modules */
-#custom-wireguard {
-    margin: 0px 0px 0px 5px;
-    padding: 1px 8px 0px 8px;
-    font-size: 16px;
-    color: @text;
-    border-radius: 5px;
-    background-color: @set;
-}
-#custom-wireguard.connected {
-    background-color: @color5;
-}
-#custom-wireguard.disconnected {
-    background-color: @set;
-}
-
 #custom-exit {
     margin: 0px 18px 0px 5px;
     padding: 0px;

yazi/.config/yazi/yazi.toml

@@ -1,6 +1,5 @@
 # A TOML linter such as https://taplo.tamasfe.dev/ can use this schema to validate your config.
 # If you encounter any issues, please make an issue at https://github.com/yazi-rs/schemas.
-"$schema" = "https://yazi-rs.github.io/schemas/yazi.json"
 
 [mgr]
 ratio          = [ 1, 4, 3 ]

zsh/.zshrc

@@ -20,7 +20,17 @@ alias emacs="emacsclient -c -a emacs"
 alias oc="opencode"
 
 # Hermes Agent - SSH directly to remote server
-alias hermes="ssh -t lazyworkhorse 'docker exec -it hermes /opt/hermes/.venv/bin/hermes'"
+hermes() {
+  if [[ -n "$1" ]]; then
+    ssh -t lazyworkhorse \
+      "docker exec -e HERMES_HONCHO_PEER_NAME=$1 -it hermes \
+      /opt/hermes/.venv/bin/hermes --profile $1"
+  else
+    ssh -t lazyworkhorse \
+      "docker exec -e HERMES_HONCHO_PEER_NAME=thierry -it hermes \
+      /opt/hermes/.venv/bin/hermes"
+  fi
+}
 
 hermes-cp() { 
   if [ $# -eq 0 ]; then