feat: add WireGuard Waybar custom module

- Added scripts/wireguard-status.sh — JSON output with lock/unlock icons, human-readable TX/RX stats, tooltip with peer/endpoint/IP details - Added custom/wireguard module to Waybar modules.json (10s interval, JSON return type, click left/right for up/down) - Added custom/wireguard to modules-right bar config - Added CSS for #custom-wireguard (connected/disconnected classes) - Added openresolv install and Waybar refresh instructions to README.org
feat: add WireGuard VPN keybinds (Super+Ctrl+V connect, Super+Ctrl+Shift+V disconnect)
2026-05-20 14:33:28 -04:00 · 2026-05-20 14:30:42 -04:00
14 changed files with 369 additions and 150 deletions
--- a/README.org
+++ b/README.org
@@ -17,6 +17,42 @@ I use stow to deploy all this to where it need to go (mostly ~/.confg).
 ** starship
 ** tmux
 ** waybar
+*** WireGuard Module
+The Waybar includes a custom WireGuard VPN status module that shows connection status, TX/RX stats, and peer info.
+
+Setup:
+
+1. Install openresolv (needed by wg-quick for DNS):
+   #+begin_src bash :tangle no
+   sudo pacman -S openresolv
+   #+end_src
+
+2. Configure sudo for wg-quick (required for click-to-toggle binds):
+   #+begin_src bash :tangle no
+   echo "$USER ALL=(ALL) NOPASSWD: /usr/bin/wg-quick" | sudo tee /etc/sudoers.d/wireguard
+   #+end_src
+
+3. Create a WireGuard config (if not exists):
+   #+begin_src bash :tangle no
+   sudo cp /etc/wireguard/work-laptop.conf /etc/wireguard/
+   sudo chmod 600 /etc/wireguard/work-laptop.conf
+   #+end_src
+
+4. Refresh Waybar to pick up new config:
+   #+begin_src bash :tangle no
+   killall -q waybar && waybar -c ~/.config/waybar/config.jsonc & -s ~/.config/waybar/style.css &
+   #+end_src
+
+Or use the launch script:
+   #+begin_src bash :tangle no
+   ~/.config/waybar/launch.sh
+   #+end_src
+
+Keybinds:
+- ~$mainMod+Ctrl+V~ — Connect WireGuard (work-laptop)
+- ~$mainMod+Ctrl+Shift+V~ — Disconnect WireGuard
+
+The module polls /usr/bin/wg every 10 seconds. It shows a lock icon with TX/RX when connected, or an unlock icon when disconnected.
 ** Wireplumber
 ** wofi
 ** yazi
--- a/doom/.config/doom/README.org
+++ b/doom/.config/doom/README.org
@@ -496,19 +496,6 @@ change ~org-directory~. It must be set before org loads!

           ((org-agenda-tag-filter-preset '("+BA_ON_SITE")))
           )
-          ("wA" "Projet Airbus Vision"
-           ((agenda ""
-                    ((org-agenda-span 150)
-                     (org-agenda-start-day "2026-05-01")
-                     (org-agenda-overriding-header "📅 Projet Airbus Vision")
-                     (org-agenda-prefix-format " %12t") ;; reserve time space
-                     (org-agenda-todo-keyword-format "    %-5s") ;; fixed-width TODO
-                     (org-agenda-tags-column -100) ;; right-align tags
-                     (org-agenda-time-grid nil)
-                     )))
-
-           ((org-agenda-tag-filter-preset '("+airbus")))
-           )
          )
        )
  )
--- a/doom/.config/doom/config.el
+++ b/doom/.config/doom/config.el
@@ -367,19 +367,6 @@

           ((org-agenda-tag-filter-preset '("+BA_ON_SITE")))
           )
-          ("wA" "Projet Airbus Vision"
-           ((agenda ""
-                    ((org-agenda-span 150)
-                     (org-agenda-start-day "2026-05-01")
-                     (org-agenda-overriding-header "📅 Projet Airbus Vision")
-                     (org-agenda-prefix-format " %12t") ;; reserve time space
-                     (org-agenda-todo-keyword-format "    %-5s") ;; fixed-width TODO
-                     (org-agenda-tags-column -100) ;; right-align tags
-                     (org-agenda-time-grid nil)
-                     )))
-
-           ((org-agenda-tag-filter-preset '("+airbus")))
-           )
          )
        )
  )
--- a/hypr/.config/hypr/host/laptop.conf
+++ b/hypr/.config/hypr/host/laptop.conf
@@ -1,48 +0,0 @@
-# Laptop (Ingenuity/Valkyrie) — NVIDIA + external monitors
-
-################
-### MONITORS ###
-################
-
-$LAPTOP=eDP-1
-$EXTERNAL_L1=DP-4
-$EXTERNAL_R1=DP-5
-$EXTERNAL_L2=DP-6
-$EXTERNAL_R2=DP-7
-
-monitor=$LAPTOP, 1920x1080, 0x0, 1
-monitor=DP-3, 1920x1080, 1920x0, 1
-
-monitor=$EXTERNAL_L1, 1920x1080, 0x-1080, 1, transform, 0
-monitor=$EXTERNAL_L2, 1920x1080,0x-1080,1,transform,0
-monitor=$EXTERNAL_R1, 1920x1080, 1920x-1480, 1, transform, 1
-monitor=$EXTERNAL_R2, 1920x1080,1920x-1480,1,transform,1
-
-#############################
-### ENVIRONMENT VARIABLES ###
-#############################
-
-env = LIBVA_DRIVER_NAME,nvidia
-env = __GLX_VENDOR_LIBRARY_NAME,nvidia
-env = WLR_NO_HARDWARE_CURSOR,1
-env = GBM_BACKEND,nvidia-drm
-env = WLR_RENDERER_ALLOW_SOFTWARE,1
-
-####################
-### WORKSPACES ###
-####################
-
-workspace = 1, name:short-1, monitor:DP-4
-workspace = 2, name:short-2, monitor:DP-4
-workspace = 3, name:long-1, monitor:DP-5
-workspace = 4, name:long-2, monitor:DP-5
-workspace = 5, name:smoll, monitor:eDP-1
-workspace = special:tools, layout:dwindle, gapsin:0
-
-### WALLPAPER ###
-
-exec-once = swww img ~/.config/wallpapers/green_yellow_forest.jpg --outputs $LAPTOP
-exec-once = swww img ~/.config/wallpapers/green_yellow_forest.jpg --outputs $EXTERNAL_L1
-exec-once = swww img ~/.config/wallpapers/green_yellow_forest.jpg --outputs $EXTERNAL_L2
-exec-once = swww img ~/.config/wallpapers/buck_head.jpg --outputs $EXTERNAL_R1
-exec-once = swww img ~/.config/wallpapers/buck_head.jpg --outputs $EXTERNAL_R2
--- a/hypr/.config/hypr/host/uconsole.conf
+++ b/hypr/.config/hypr/host/uconsole.conf
@@ -1,27 +0,0 @@
-# uConsole CM5 — DSI display
-
-################
-### MONITORS ###
-################
-
-monitor=DSI-2, 720x1280, 0x0, 1
-
-#############################
-### ENVIRONMENT VARIABLES ###
-#############################
-
-env = WLR_NO_HARDWARE_CURSOR,1
-
-####################
-### WORKSPACES ###
-####################
-
-workspace = 1, name:short-1, monitor:DSI-2
-workspace = 2, name:short-2, monitor:DSI-2
-workspace = 3, name:long-1, monitor:DSI-2
-
-####################
-### AUTOSTART ###
-####################
-
-exec-once = swww img ~/.config/wallpapers/green_yellow_forest.jpg --outputs DSI-2
--- a/hypr/.config/hypr/hyprland.conf
+++ b/hypr/.config/hypr/hyprland.conf
@@ -1,14 +1,52 @@
-# Common Hyprland configuration — shared across all hosts
-# Host-specific settings (monitors, env, workspaces) in host/monitors.conf
+# This is an example Hyprland config file.
+# Refer to the wiki for more information.
+# https://wiki.hyprland.org/Configuring/Configuring-Hyprland/

-source = mocha.conf
+# Please note not all available settings / options are set here.
+# For a full list, see the wiki
+
+# You can split this configuration into multiple files
+# Create your files separately and then link them to this file like this:
+# source = ~/.config/hypr/myColors.conf
 source = ~/.cache/wal/colors-hyprland.conf
-source = host/monitors.conf
+
+################
+### MONITORS ###
+################
+
+$LAPTOP=eDP-1
+$EXTERNAL_L1=DP-4
+$EXTERNAL_R1=DP-5
+$EXTERNAL_L2=DP-6
+$EXTERNAL_R2=DP-7
+
+# See https://wiki.hyprland.org/Configuring/Monitors/
+# Useful command: 
+# hyprctl monitors all
+## Valkyrie setup
+# monitor=eDP-1,highres,auto,2 #3200x1800,0x0,2
+# monitor=HDMI-A-2,2560x1600,auto,1 #1600x0,1  #x-370,1,transform,1
+## Ingenuity setup
+monitor=$LAPTOP, 1920x1080, 0x0, 1
+monitor=DP-3, 1920x1080, 1920x0, 1        # HDMI screen
+# Horizontal setup
+#monitor=DP-4,1920x1080,-960x-1080,1    # Left screen
+#monitor=DP-6,1920x1080,-960x-1080,1    # Left screen
+#monitor=DP-5,1920x1080,960x-1080,1     # Right screen
+#monitor=DP-7,1920x1080,960x-1080,1     # Right screen
+# Vertical setup
+monitor=$EXTERNAL_L1, 1920x1080, 0x-1080, 1, transform, 0        # Left screen
+monitor=$EXTERNAL_L2, 1920x1080,0x-1080,1,transform,0        # Left screen
+monitor=$EXTERNAL_R1, 1920x1080, 1920x-1480, 1, transform, 1     # Right screen
+monitor=$EXTERNAL_R2, 1920x1080,1920x-1480,1,transform,1     # Right screen

 ###################
 ### MY PROGRAMS ###
 ###################

+# See https://wiki.hyprland.org/Configuring/Keywords/
+
+# Set programs that you use
 $terminal = kitty
 $editor = emacsclient -c -a emacs
 $menu = wofi --show drun
@@ -20,10 +58,20 @@ $monitoring = kitty btop
 ### AUTOSTART ###
 #################

+# Autostart necessary processes (like notifications daemons, status bars, etc.)
+# Or execute your favorite apps at launch like this:
+
+# exec-once = $terminal
+# exec-once = nm-applet &
 exec = hyprshade auto
 exec-once = udiskie
 exec-once = waybar
 exec-once = swww-daemon
+exec-once = swww img ~/.config/wallpapers/green_yellow_forest.jpg --outputs $LAPTOP
+exec-once = swww img ~/.config/wallpapers/green_yellow_forest.jpg --outputs $EXTERNAL_L1
+exec-once = swww img ~/.config/wallpapers/green_yellow_forest.jpg --outputs $EXTERNAL_L2
+exec-once = swww img ~/.config/wallpapers/buck_head.jpg --outputs $EXTERNAL_R1
+exec-once = swww img ~/.config/wallpapers/buck_head.jpg --outputs $EXTERNAL_R2
 exec-once = swaync
 exec-once = hypridle
 exec-once = hyprlock
@@ -34,34 +82,60 @@ exec-once = dbus-update-activation-environment --systemd HYPRLAND_INSTANCE_SIGNA
 ### ENVIRONMENT VARIABLES ###
 #############################

+# See https://wiki.hyprland.org/Configuring/Environment-variables/
+
 env = XCURSOR_SIZE,24
 env = HYPRCURSOR_SIZE,24
+env = LIBVA_DRIVER_NAME,nvidia
+env = __GLX_VENDOR_LIBRARY_NAME,nvidia
+env = WLR_NO_HARDWARE_CURSOR,1
 env = XDG_SESSION_TYPE,wayland
+env = GBM_BACKEND,nvidia-drm
+env = WLR_RENDERER_ALLOW_SOFTWARE,1

 #####################
 ### LOOK AND FEEL ###
 #####################

+# Refer to https://wiki.hyprland.org/Configuring/Variables/
+
+# https://wiki.hyprland.org/Configuring/Variables/#general
 general {
    gaps_in = 7.5
    gaps_out = 15
+
    border_size = 2
+
+    # https://wiki.hyprland.org/Configuring/Variables/#variable-types for info about colors
    col.active_border = $color1 $color1 $color2 45deg
    col.inactive_border = $background
+
+    # Set to true enable resizing windows by clicking and dragging on borders and gaps
    resize_on_border = false
+
+    # Please see https://wiki.hyprland.org/Configuring/Tearing/ before you turn this on
    allow_tearing = false
+
    layout = dwindle
 }

+# https://wiki.hyprland.org/Configuring/Variables/#decoration
 decoration {
    rounding = 4
+
+    # Change transparency of focused and unfocused windows
    active_opacity = 0.9
    inactive_opacity = 0.75
 }

+# https://wiki.hyprland.org/Configuring/Variables/#animations
 animations {
    enabled = true
+
+    # Default animations, see https://wiki.hyprland.org/Configuring/Animations/ for more
+
    bezier = myBezier, 0.05, 0.9, 0.1, 1.05
+
    animation = windows, 1, 1.6, myBezier
    animation = windowsOut, 1, 1.6, default, popin 80%
    animation = border, 1, 1.6, default
@@ -71,37 +145,59 @@ animations {
    animation = specialWorkspace, 1, 1.6, myBezier, slidefadevert -10%
 }

+# See https://wiki.hyprland.org/Configuring/Dwindle-Layout/ for more
 dwindle {
-    preserve_split = true
+    # Note: pseudotile variable removed in 0.55+. Use `pseudo` dispatcher to toggle per-window.
+    # Bound to $mainMod + P below.
+
+    # This prevents the layout from collapsing if you close one window
+    preserve_split = true # You probably want this
+
+    # 0 -> follow mouse, 1 -> always left/top, 2 -> always right/bottom
    force_split = 2
 }

+# See https://wiki.hyprland.org/Configuring/Master-Layout/ for more
 master {
    new_status = master
 }

+# https://wiki.hyprland.org/Configuring/Variables/#misc
 misc {
-    force_default_wallpaper = 0
-    disable_hyprland_logo = true
+    force_default_wallpaper = 0 # Set to 0 or 1 to disable the anime mascot wallpapers
+    disable_hyprland_logo = true # If true disables the random hyprland logo / anime girl background. :(
 }

+
 #############
 ### INPUT ###
 #############

+# https://wiki.hyprland.org/Configuring/Variables/#input
 input {
-    kb_layout = us,ca
+    kb_layout = us,ca #,halmak
    kb_options = grp:win_space_toggle, ctrl:nocaps
+    # kb_variant =
+    # kb_model =
+    # kb_rules = 
+
    follow_mouse = 1
-    sensitivity = 0.5
+
+    sensitivity = 0.5 # -1.0 - 1.0, 0 means no modification.
+
    touchpad {
        natural_scroll = true
        disable_while_typing = true
    }
 }

-gestures {}
+# https://wiki.hyprland.org/Configuring/Variables/#gestures
+gestures {
+    # workspace_swipe = false
+}

+# Example per-device config
+# See https://wiki.hyprland.org/Configuring/Keywords/#per-device-input-configs for more
 device {
    name = epic-mouse-v1
    sensitivity = -0.5
@@ -111,8 +207,10 @@ device {
 ### KEYBINDINGS ###
 ###################

-$mainMod = SUPER
+# See https://wiki.hyprland.org/Configuring/Keywords/
+$mainMod = SUPER # Sets "Windows" key as main modifier

+# Example binds, see https://wiki.hyprland.org/Configuring/Binds/ for more
 bind = $mainMod, T, exec, $terminal
 bind = $mainMod, D, killactive,
 bind = $mainMod SHIFT, Q, exit,
@@ -122,43 +220,60 @@ bind = $mainMod, E, exec, $editor
 bind = $mainMod, V, togglefloating,
 bind = $mainMod, R, exec, $menu
 bind = $mainMod, Z, exec, $zen
-bind = $mainMod, P, pseudo,
+# togglesplit removed as standalone dispatcher in 0.55+; use `layoutmsg togglesplit` instead
+bind = $mainMod, P, pseudo, # dwindle
 bind = $mainMod, N, movecurrentworkspacetomonitor, -1
 bind = $mainMod SHIFT, N, movecurrentworkspacetomonitor, +1
 bind = $mainMod, X, swapwindow
 bind = $mainMod, B, exec, python /home/tpouplier/ExoKortex/4-Automata/recordntrans/record_transcribe.py
+# bind = $mainMod, G, exec, nerd-dictation end
 bind = $mainMod, A, exec, $music
 bind = $mainMod, C, exec, emacsclient -n -c -e '(gortium/hermes-vterm)'

+# WireGuard VPN toggle (uses config file: /etc/wireguard/work-laptop.conf)
+bind = $mainMod CTRL, V, exec, sudo wg-quick up work-laptop
+bind = $mainMod CTRL SHIFT, V, exec, sudo wg-quick down work-laptop
+
+# Full screen
 bind = SUPER, F, fullscreen 
+
+# Screenshot
 bind = , PRINT, exec, hyprshot -m output
 bind = $mainMod, PRINT, exec, hyprshot -m window
 bind = shift, PRINT, exec, hyprshot -m region
+
+# hyprlock
 bind = $mainMod, o, exec, hyprlock

+# Move focus with mainMod + arrow keys
 bind = $mainMod, h, movefocus, l
 bind = $mainMod, j, movefocus, d
 bind = $mainMod, k, movefocus, u
 bind = $mainMod, l, movefocus, r

+# Forward and reverse cycle (to focus floating)
 bind = $mainMod, Tab, cyclenext
 bind = $mainMod SHIFT, Tab, cyclenext, prev

+# Resize windows
 bind = $mainMod CTRL, l, resizeactive, 20 0
 bind = $mainMod CTRL, h, resizeactive, -20 0
 bind = $mainMod CTRL, k, resizeactive, 0 -20
 bind = $mainMod CTRL, j, resizeactive, 0 20

+# Swap window position
 bind = $mainMod SHIFT, h, swapwindow, l
 bind = $mainMod SHIFT, j, swapwindow, d
 bind = $mainMod SHIFT, k, swapwindow, u
 bind = $mainMod SHIFT, l, swapwindow, r

+# Move floating window
 bind = $mainMod SHIFT, l, moveactive, 100 0
 bind = $mainMod SHIFT, h, moveactive, -100 0
 bind = $mainMod SHIFT, k, moveactive, 0 -100
 bind = $mainMod SHIFT, j, moveactive, 0 100

+# Switch workspaces with mainMod + [0-9]
 bind = $mainMod, 1, workspace, 1
 bind = $mainMod, 2, workspace, 2
 bind = $mainMod, 3, workspace, 3
@@ -170,6 +285,7 @@ bind = $mainMod, 8, workspace, 8
 bind = $mainMod, 9, workspace, 9
 bind = $mainMod, 0, workspace, 10

+# Move active window to a workspace with mainMod + SHIFT + [0-9]
 bind = $mainMod SHIFT, 1, movetoworkspace, 1
 bind = $mainMod SHIFT, 2, movetoworkspace, 2
 bind = $mainMod SHIFT, 3, movetoworkspace, 3
@@ -181,15 +297,19 @@ bind = $mainMod SHIFT, 8, movetoworkspace, 8
 bind = $mainMod SHIFT, 9, movetoworkspace, 9
 bind = $mainMod SHIFT, 0, movetoworkspace, 10

+# Example special workspace (scratchpad)
 bind = $mainMod, S, togglespecialworkspace, tools
 bind = $mainMod SHIFT, S, movetoworkspace, special:tools

+# Scroll through existing workspaces with mainMod + scroll
 bind = $mainMod, mouse_down, workspace, e+1
 bind = $mainMod, mouse_up, workspace, e-1

+# Move/resize windows with mainMod + LMB/RMB and dragging
 bindm = $mainMod, mouse:272, movewindow
 bindm = $mainMod, mouse:273, resizewindow

+# Laptop multimedia keys for volume and LCD brightness
 bindel = ,XF86AudioRaiseVolume, exec, wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%+
 bindel = ,XF86AudioLowerVolume, exec, wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%-
 bindel = ,XF86AudioMute, exec, wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle
@@ -197,11 +317,13 @@ bindel = ,XF86AudioMicMute, exec, wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle
 bindel = ,XF86MonBrightnessUp, exec, brightnessctl s 10%+
 bindel = ,XF86MonBrightnessDown, exec, brightnessctl s 10%-

+# Requires playerctl
 bindl = , XF86AudioNext, exec, playerctl next
 bindl = , XF86AudioPause, exec, playerctl play-pause
 bindl = , XF86AudioPlay, exec, playerctl play-pause
 bindl = , XF86AudioPrev, exec, playerctl previous

+# Emacs-everywhere
 bind = $mainMod, W, exec, emacsclient --eval '(thanos/type)'
 windowrule {
    name = float-emacs
@@ -209,16 +331,45 @@ windowrule {
    float = true
 }

+# Play/Pause
+# bind = $mainMod, P, exec, playerctl play-pause
+
+# Next Track
+# bind = $mainmod SHIFT, L, exec, playerctl next
+
+# Previous Track
+# bind = $mainmod SHIFT, H, exec, playerctl previous
+
+# Volume Up (player volume)
+# bind = $mainmod , U, exec, playerctl volume 0.05+
+
+# Volume Down (player volume)
+# bind = $mainmod, D, exec, playerctl volume 0.05-
+
+# Stop Playback
+# bind = $mainmod, S, exec, playerctl stop
+
 ##############################
 ### WINDOWS AND WORKSPACES ###
 ##############################

+# See https://wiki.hyprland.org/Configuring/Window-Rules/ for more
+# See https://wiki.hyprland.org/Configuring/Workspace-Rules/ for workspace rules
+
+# Example windowrule v1
+# windowrule = float, ^(kitty)$
+
+# Example windowrule v2
+# windowrule = float,class:^(kitty)$,title:^(kitty)$
+
+# Ignore maximize requests from apps. You'll probably like this.
 windowrule {
    name = suppress-maximize-events
    match:class = .*
    suppress_event = maximize
 }

+# Fix some dragging issues with XWayland
 windowrule {
    name = nofocus-xwayland-float
    match:class = ^$
@@ -230,7 +381,15 @@ windowrule {
    no_focus = true
 }

-# Dashboard windows for special workspace
+workspace = 1, name:short-1, monitor:DP-4  # Left screen
+workspace = 2, name:short-2, monitor:DP-4  # Left screen
+workspace = 3, name:long-1, monitor:DP-5  # Right screen
+workspace = 4, name:long-2, monitor:DP-5  # Right screen
+workspace = 5, name:smoll, monitor:eDP-1  # Laptop screen
+#workspace = 4, name:windows, monitor:DP-4, on-created-empty:VBoxManage startvm "Windows 11"
+workspace = special:tools, layout:dwindle, gapsin:0
+
+# Top Left: btop
 windowrule {
    name = dashboard-btop
    match:class = ^(btop)$
@@ -238,6 +397,7 @@ windowrule {
    workspace = special:tools
 }

+# Top Right: ncspot
 windowrule {
    name = dashboard-ncspot
    match:class = ^(ncspot)$
@@ -245,6 +405,7 @@ windowrule {
    workspace = special:tools
 }

+# Bottom Left: ncpamixer
 windowrule {
    name = dashboard-ncpamixer
    match:class = ^(ncpamixer)$
@@ -252,6 +413,7 @@ windowrule {
    workspace = special:tools
 }

+# Bottom Right: bluetuith
 windowrule {
    name = dashboard-bluetuith
    match:class = ^(bluetuith)$
@@ -259,6 +421,7 @@ windowrule {
    workspace = special:tools
 }

+# Bind to launch the suite (Run this once)
 bind = $mainMod, grave, exec, kitty --class btop btop
 bind = $mainMod, grave, exec, kitty --class ncspot ncspot
 bind = $mainMod, grave, exec, kitty --class ncpamixer ncpamixer
--- a/hypr/.config/hypr/mocha.conf
+++ b/hypr/.config/hypr/mocha.conf
@@ -76,11 +76,3 @@ $mantleAlpha = 181825

 $crust = rgb(11111b)
 $crustAlpha = 11111b
-
-# Fallback colors for when pywal hasn't generated colors-hyprland.conf
-# (sourced by hyprland.conf — $color1/$color2 for active border gradients,
-#  $background for inactive border and general bg usage)
-$color1 = rgb(cba6f7)
-$color2 = rgb(f5c2e7)
-$color3 = rgb(89b4fa)
-$background = rgb(1e1e2e)
--- a/scripts/scrot-ocr.sh
+++ b/scripts/scrot-ocr.sh
@@ -1,16 +0,0 @@
-#!/bin/bash
-scrot-ocr: Select screen region → OCR → clipboard
-Deps: grim, slurp, tesseract, wl-clipboard, libnotify
-set -euo pipefail
-
-LANG="${1:-eng}"
-IMG="/tmp/scrot-ocr-$(date +%s).png"
-
-grim -g "$(slurp -d)" "$IMG"
-TEXT=$(tesseract "$IMG" stdout -l "$LANG" 2>/dev/null | sed '/^[[:space:]]*$/d')
-
-echo -n "$TEXT" | wl-copy --paste-once
-echo "$TEXT"
-
-notify-send "scrot-ocr" "$(echo "$TEXT" | wc -l) lines copied to clipboard" -t 3000
-rm -f "$IMG"
--- a/scripts/wireguard-status.sh
+++ b/scripts/wireguard-status.sh
@@ -0,0 +1,129 @@
+#!/usr/bin/env bash
+# wireguard-status.sh -- JSON status for Waybar
+# Outputs: {"text":"...","class":"connected|disconnected","tooltip":"..."}
+#
+# Waybar config example (in ~/.config/waybar/config.jsonc):
+#   "custom/wireguard": {
+#       "exec": "$HOME/.config/waybar/scripts/wireguard-status.sh",
+#       "interval": 10,
+#       "return-type": "json"
+#   }
+
+set -euo pipefail
+
+# --- Config -------------------------------------------------------
+ICON_LOCKED="\uf023"       # nf-fa-lock (FontAwesome)
+ICON_UNLOCKED="\uf09e"     # nf-fa-unlock
+# Override with environment variables if set:
+ICON_LOCKED="${WG_ICON_LOCKED:-$ICON_LOCKED}"
+ICON_UNLOCKED="${WG_ICON_UNLOCKED:-$ICON_UNLOCKED}"
+
+# --- Helpers ------------------------------------------------------
+die() { echo "$*" >&2; exit 1; }
+
+# Find the wg binary — works on NixOS, standard Linux, etc.
+find_wg() {
+    if command -v wg &>/dev/null; then
+        echo "wg"
+    elif [ -x /run/current-system/sw/bin/wg ]; then
+        echo "/run/current-system/sw/bin/wg"
+    elif [ -x /usr/bin/wg ]; then
+        echo "/usr/bin/wg"
+    else
+        return 1
+    fi
+}
+
+# Find the ip binary
+find_ip() {
+    if command -v ip &>/dev/null; then
+        echo "ip"
+    elif [ -x /run/current-system/sw/bin/ip ]; then
+        echo "/run/current-system/sw/bin/ip"
+    elif [ -x /usr/sbin/ip ]; then
+        echo "/usr/sbin/ip"
+    elif [ -x /sbin/ip ]; then
+        echo "/sbin/ip"
+    else
+        return 1
+    fi
+}
+
+format_bytes() {
+    local bytes=$1
+    if [ "$bytes" -lt 1024 ]; then
+        echo "${bytes}B"
+    elif [ "$bytes" -lt $((1024 * 1024)) ]; then
+        echo "$(awk "BEGIN { printf \"%.1f KiB\", $bytes / 1024 }")"
+    elif [ "$bytes" -lt $((1024 * 1024 * 1024)) ]; then
+        echo "$(awk "BEGIN { printf \"%.1f MiB\", $bytes / (1024 * 1024) }")"
+    else
+        echo "$(awk "BEGIN { printf \"%.2f GiB\", $bytes / (1024 * 1024 * 1024) }")"
+    fi
+}
+
+# --- Main ---------------------------------------------------------
+
+WG_BIN=$(find_wg 2>/dev/null) || {
+    # wg not installed — report as disconnected
+    printf '{"text":"%s","class":"disconnected","tooltip":"WireGuard not installed"}\n' "$ICON_UNLOCKED"
+    exit 0
+}
+
+IP_BIN=$(find_ip 2>/dev/null) || true
+
+# Find all WireGuard interfaces
+INTERFACES=$("$WG_BIN" show interfaces 2>/dev/null) || {
+    # No WireGuard interfaces exist (wg module not loaded?)
+    printf '{"text":"%s","class":"disconnected","tooltip":"No WireGuard interfaces"}\n' "$ICON_UNLOCKED"
+    exit 0
+}
+
+# Parse into array, handling possible single-line space-separated output
+IFS=' ' read -ra ifaces <<< "$INTERFACES"
+if [ ${#ifaces[@]} -eq 0 ]; then
+    printf '{"text":"%s","class":"disconnected","tooltip":"No WireGuard interfaces"}\n' "$ICON_UNLOCKED"
+    exit 0
+fi
+
+# Just use the first interface (most setups have one)
+IFACE="${ifaces[0]}"
+
+# Get transfer stats
+TRANSFER=$("$WG_BIN" show "$IFACE" transfer 2>/dev/null) || {
+    printf '{"text":"%s","class":"disconnected","tooltip":"Cannot read stats for %s"}\n' "$ICON_UNLOCKED" "$IFACE"
+    exit 0
+}
+
+# Parse: "rx_bytes tx_bytes"
+RX_BYTES=$(echo "$TRANSFER" | awk '{print $1}')
+TX_BYTES=$(echo "$TRANSFER" | awk '{print $2}')
+
+RX_HUMAN=$(format_bytes "${RX_BYTES:-0}")
+TX_HUMAN=$(format_bytes "${TX_BYTES:-0}")
+
+# Get endpoint info for tooltip
+ENDPOINT=$("$WG_BIN" show "$IFACE" endpoints 2>/dev/null | head -1 | awk '{print $2}') || ENDPOINT=""
+PEER=$("$WG_BIN" show "$IFACE" peers 2>/dev/null | head -1) || PEER=""
+
+# Build status line
+STATUS_TEXT="${ICON_LOCKED} \u2193${RX_HUMAN} \u2191${TX_HUMAN}"
+
+# Build tooltip
+TOOLTIP="${IFACE}"
+if [ -n "$PEER" ]; then
+    TOOLTIP="${TOOLTIP}\nPeer: ${PEER}"
+fi
+if [ -n "$ENDPOINT" ]; then
+    TOOLTIP="${TOOLTIP}\nEndpoint: ${ENDPOINT}"
+fi
+# Add IP info if ip is available
+if [ -n "$IP_BIN" ]; then
+    IFACE_IP=$("$IP_BIN" -4 addr show dev "$IFACE" 2>/dev/null | awk '/inet / {print $2}') || IFACE_IP=""
+    if [ -n "$IFACE_IP" ]; then
+        TOOLTIP="${TOOLTIP}\nIP: ${IFACE_IP}"
+    fi
+fi
+TOOLTIP="${TOOLTIP}\nRX: ${RX_HUMAN}\nTX: ${TX_HUMAN}"
+
+printf '{"text":"%s","class":"connected","tooltip":"%s"}\n' "$STATUS_TEXT" "$TOOLTIP"
--- a/waybar/.config/waybar/config.jsonc
+++ b/waybar/.config/waybar/config.jsonc
@@ -28,6 +28,7 @@
           "pulseaudio",
           "bluetooth",
           "network",
+           "custom/wireguard",
           "battery", 
           "custom/exit"
        ]
--- a/waybar/.config/waybar/modules.json
+++ b/waybar/.config/waybar/modules.json
@@ -138,6 +138,15 @@
 		//"on-click": "~/dotfiles/.settings/networkmanager.sh"
 	},
 	
+	// wireguard
+	"custom/wireguard": {
+		"exec": "$HOME/.config/waybar/scripts/wireguard-status.sh",
+		"interval": 10,
+		"return-type": "json",
+		"on-click": "kitty sudo wg-quick up work-laptop",
+		"on-click-right": "kitty sudo wg-quick down work-laptop"
+	},
+
 	// battery
 	"battery": {
 		"states": {
--- a/waybar/.config/waybar/style.css
+++ b/waybar/.config/waybar/style.css
@@ -213,6 +213,21 @@ tooltip label {
 }

 /* custom modules */
+#custom-wireguard {
+    margin: 0px 0px 0px 5px;
+    padding: 1px 8px 0px 8px;
+    font-size: 16px;
+    color: @text;
+    border-radius: 5px;
+    background-color: @set;
+}
+#custom-wireguard.connected {
+    background-color: @color5;
+}
+#custom-wireguard.disconnected {
+    background-color: @set;
+}
+
 #custom-exit {
    margin: 0px 18px 0px 5px;
    padding: 0px;
--- a/yazi/.config/yazi/yazi.toml
+++ b/yazi/.config/yazi/yazi.toml
@@ -1,5 +1,6 @@
 # A TOML linter such as https://taplo.tamasfe.dev/ can use this schema to validate your config.
 # If you encounter any issues, please make an issue at https://github.com/yazi-rs/schemas.
+"$schema" = "https://yazi-rs.github.io/schemas/yazi.json"

 [mgr]
 ratio          = [ 1, 4, 3 ]
--- a/zsh/.zshrc
+++ b/zsh/.zshrc
@@ -20,17 +20,7 @@ alias emacs="emacsclient -c -a emacs"
 alias oc="opencode"

 # Hermes Agent - SSH directly to remote server
-hermes() {
-  if [[ -n "$1" ]]; then
-    ssh -t lazyworkhorse \
-      "docker exec -e HERMES_HONCHO_PEER_NAME=$1 -it hermes \
-      /opt/hermes/.venv/bin/hermes --profile $1"
-  else
-    ssh -t lazyworkhorse \
-      "docker exec -e HERMES_HONCHO_PEER_NAME=thierry -it hermes \
-      /opt/hermes/.venv/bin/hermes"
-  fi
-}
+alias hermes="ssh -t lazyworkhorse 'docker exec -it hermes /opt/hermes/.venv/bin/hermes'"

 hermes-cp() { 
  if [ $# -eq 0 ]; then